FORD WSS-M2C915-A-2004 OIL ENGINE ILSAC GF-3 INITIAL FILL SAE 5W-30 TO BE USED WITH FORD WSS-M99P1111-A 《SAE 5W-30初始注入型LSAC GF-3发动机油 与标准FORD WSS-M99P3333-A一起使用 》.pdf

《FORD WSS-M2C915-A-2004 OIL ENGINE ILSAC GF-3 INITIAL FILL SAE 5W-30 TO BE USED WITH FORD WSS-M99P1111-A 《SAE 5W-30初始注入型LSAC GF-3发动机油 与标准FORD WSS-M99P3333-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M2C915-A-2004 OIL ENGINE ILSAC GF-3 INITIAL FILL SAE 5W-30 TO BE USED WITH FORD WSS-M99P1111-A 《SAE 5W-30初始注入型LSAC GF-3发动机油 与标准FORD WSS-M99P3333-A一起使用 》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 06 14 Revised Para 3.0 inserted; para 3.1, 3.6 “NiL“ or Trace“ are not permissible) S _ _ _ _ _ P _ _ _ _ _ Zn _ _ _ _ _ Ba _ _ _ _ _ Ca _ _ _ _ _ Mg _ _ _ _ _ Na _ _ _ _ _ N _ _ _ _ _ B _ _ _ _ _ Cu _ _ _ _ _ Cl _ _ _ _ _ Sulfated Ash _

2、_ _ _ _ V. Tests Conducted _ _ _ _ _ Comments: _ _ _ _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C915-APrinted copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 8 of 9 ILSAC GF-3 SAE 5W-30 Supplement A Page 5 of 5 Oil Company_ Date_ Product Name_ Product Co

3、de_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 9.3-.001%) _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C915-APrinted copies are uncontrolled Copyright 2004, Ford G

4、lobal Technologies, LLC Page 9 of 9 ILSAC GF-3 SAE 5W-30 Supplement B Page 1 of 1 Oil Company_ Date_ Product Name_ Product Code_ Blend Plant Location_ Quality Control Certification Approved Physical/Chemical Properties Limits Frequency Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (A

5、STM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298), kg/L _ _ Viscosity at -25 C (ASTM D 5293), mPa.s _ _ Viscosity at -30 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -30 C, mPa.s _ _ (ASTM D 4684) at -35 C, mPa.s _ _ Pour Point (ASTM D 97), C _ _ Stab

6、le Pour Point (SAE J300 App. B), C _ _ Gelation Index (ASTM D 5133) _ _ Flash Point (ASTM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (ASTM D 5800), % _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Dist. by GC at 371 C (ASTM D 6417), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM

7、D 3945 or CEC L-14A-78 _ _ After 10 h in “L-38“ test _ _ HTHS Viscosity, mPa-sec 150 C & 1061/sec (ASTM D 4683 or CEC L-36T-84) New Oil _ _ After ASTM D 3945 or CEC L-14A-78 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) _ _ Filterability (FLTM BJ 124-1), % _ _ Water Tolerance (Modified FLTM BJ 124

8、-01), % _ _ Foaming Sequence I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ High Temperature Foaming (ASTM D 6082), mL _ _ TEOST MHT, mg _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Phosphorus content, % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Signature_ Title_ Materials Engineering Concurrence_