FORD WSS-M2C911-A1-2009 OIL ENGINE EUROPEAN INITIAL FILL SAE 10W-40 TO BE USED WITH FORD WSS-M99P1111-A 《AE 10W-40初始注入型发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M2C911-A1-2009 OIL ENGINE EUROPEAN INITIAL FILL SAE 10W-40 TO BE USED WITH FORD WSS-M99P1111-A 《AE 10W-40初始注入型发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M2C911-A1-2009 OIL ENGINE EUROPEAN INITIAL FILL SAE 10W-40 TO BE USED WITH FORD WSS-M99P1111-A 《AE 10W-40初始注入型发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 11 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 06 15 Revised Para 3.0 inserted; para 3.1, 3.6 “NiL“ or Trace“ are not permissible S _ _ _ _ _ P _ _ _ _ _ Zn _ _ _ _ _ Ba _ _ _ _ _ Ca _ _ _ _ _ Mg _ _ _ _ _ Na _ _

2、 _ _ _ N _ _ _ _ _ B _ _ _ _ _ Cu _ _ _ _ _ Cl _ _ _ _ _ Sulfated Ash _ _ _ _ _ V. Tests Conducted _ _ _ _ _ Comments: _ _ _ _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C911-A1Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 9 of 10 Supplement A Pa

3、ge 6 of 6 Oil Company_ Date_ Product Name_ Product Code_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 12.5 - 16.3 _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298),

4、 kg/L _ _ Viscosity at -20 C (ASTM D 5293), mPa.s 3500 max _ _ Viscosity at -30 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -25 C, mPa.s 30,000 max _ _ (ASTM D 4684) at -30 C, mPa.s 60,000 max _ _ Pour Point (ASTM D 97), C _ _ Stable Pour Point (SAE J300 App. B), C _ _ Gelation Index (

5、ASTM D 5133) _ _ Flash Point (ASTM D 93), C 185 min _ _ Volatility Evap. Loss, 1 h at 250 C (CEC-L-40-A-93), % 13 max _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM D 3945 or CEC L-14-A-88 12.5-16.3 _ _ After 10 h in “L-38“ Test 12.5-16.3 _ _ Vi

6、scosity at 150 C and 106s-1 (ASTM D 4683 or CEC L-36-A-90), mPa.s New Oil 3.5 min _ _ After ASTM D 3945 or CEC L-14-A-88 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) 1b max _ _ Filterability (FLTM BJ 124-01), % 50 max _ _ Water Tolerance (Modified FLTM BJ 124-01), % _ _ Foaming Sequence I, mL 10/

7、0 max _ _ Sequence II, mL 50/0 max _ _ Sequence III, mL 10/0 max _ _ Sequence IV, mL 100/0 max _ _ TEOST Test (Method 33), mg _ _ JAMA Hot Tube Test (if available) (KES 07.803), mg 100 max _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (AS

8、TM D 874), % 1.5 max _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Phosphorus, % _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C911-A1Printed copi

9、es are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 10 of 10 Supplement B Page 1 of 1 Oil Company_ Date_ Product Name_ Product Code_ Blend Plant Location_ Quality Control Certification Approved Physical/Chemical Properties Limits Frequency Viscosity at 150 C (ASTM D 445), mm2/s _

10、_ Viscosity at 100 C (ASTM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298), kg/L _ _ Viscosity at -20 C (ASTM D 5293), mPa.s _ _ Viscosity at -25 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -25 C, mPa.s _ _ (ASTM D 4684) at -30 C, mPa.s _ _ Pour Point

11、(ASTM D 97), C _ _ Stable Pour Point (SAE J300 App. B), C _ _ Gelation Index (ASTM D 5133) _ _ Flash Point (ASTM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (CEC-L-40-A-93), % _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM D 3945 or CEC L-1

12、4-A-88 _ _ After 10 h in “L-38“ Test _ _ Viscosity at 150 C and 106s-1 (ASTM D 4683 or CEC L-36-A-90), mPa.s New Oil _ _ After ASTM D 3945 or CEC L-14-A-88 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) _ _ Filterability (FLTM BJ 124-01), % _ _ Water Tolerance (Modified FLTM BJ 124-01), % _ _ Foami

13、ng Sequence I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ Sequence IV, mL _ _ TEOST Test (Method 33), mg _ _ JAMA Hot Tube Test (KES 07.803, if available), mg _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Phosphorus, % _ _ Signature_ Title_ Materials Engineering Concurrence_