FORD WSS-M1H1041-A-2010 FABRIC OTIS WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《OTIS图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M1H1041-A-2010 FABRIC OTIS WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《OTIS图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1041-A-2010 FABRIC OTIS WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《OTIS图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 01 07 Activated M. Montgomery, EU Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, OTIS, WOVEN JACQUARD, UNLAMINATED WSS-M1H1041-A 1. SCOPE The material defined by this specification is a W

2、oven Jacquard Polyester face fabric. 2. APPLICATION WSS-M1H1041-A has been introduced as an interior trim fabric for use in the C346 Global program 2011 MY, as a seat insert. Fabric developed using a Tri-Laminate construction with no back coating. 3. REQUIREMENTS In addition to the requirements list

3、ed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2

4、.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 340 ends/ 10cm Weft 180 picks/ 10cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 365 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 620 dtex, f 102 AJT Weft 620 dtex, f 102 AJT Weft 167

5、 dtex, f 34 AJT ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1041-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn Dyed or As approved by Materials Engineering 3.6 FINISHED OPERATIONS - Washing - Drying - Fixing or As approved by Materi

6、als Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global C346 strategy to use Tri-Laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, Composition & Yarn construction.The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4.