FORD WSS-M1H1024-A2-2007 FABRIC NATURE RF PATTERN FLAT WOVEN 100% POST INDUSTRIAL YARN TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《100%工业使用后回收的经拒水整理处理的平织大自.pdf

《FORD WSS-M1H1024-A2-2007 FABRIC NATURE RF PATTERN FLAT WOVEN 100% POST INDUSTRIAL YARN TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《100%工业使用后回收的经拒水整理处理的平织大自.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1024-A2-2007 FABRIC NATURE RF PATTERN FLAT WOVEN 100% POST INDUSTRIAL YARN TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《100%工业使用后回收的经拒水整理处理的平织大自.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 08 31 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, NATURE RF PATTERN, FLAT WOVEN 100% POST WSS-M1H1024-A2 INDUSTRIAL YARN TREATED WITH REPELLANT FINISH 1. SCOPE

2、The material defined by this specification is a NATURE RF pattern, Dobby flat woven bodycloth of good quality and uniform composition. The fabric is made of 100% Post-Industrial yarns. The fabric is treated with a repellant finish (RF) to prevent staining. 2. APPLICATION This specification was relea

3、sed originally for material used as an interior trim fabric for the 2007 1/2 U377 Escape Hybrid, seat insert. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4, as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS M

4、aterial suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 355 ends/10 cm Fill 245 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01

5、) Face Fabric w/ backcoat 415 g/m2Laminated to 3mm foam 526 g/m2 ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1024-A2 Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Post- Indust

6、rial Polyester Backcoating Acrylic Latex 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f34 (false twist post industrial polyester yarn) x 2 Fill 16.7 tex f34 (false twist post industrial solution dye polyester yarn) x 2 16.7 tex f34 (false twist post industrial polyester) x 2 33.3 tex f72 (false twist post industrial polyester) x 2 3.5 METHOD OF DYEING Solution Dye/Piece Dyed 3.6 FINISHING OPERATIONS Dye, RF treatment, Dry, Backcoat, Dry Note: Nature RF fabric is treated with maximum 1% repellant finish (RF) to prevent staining caused by water based agents.