FORD WSS-M15J16-A2-2016 PAINT TWO COMPONENT COLOR COAT FOR PLASTIC INTERIOR BASE CLEAR COAT SYSTEM LOW GLOSS (C-L) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M15J16-A.pdf

《FORD WSS-M15J16-A2-2016 PAINT TWO COMPONENT COLOR COAT FOR PLASTIC INTERIOR BASE CLEAR COAT SYSTEM LOW GLOSS (C-L) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M15J16-A.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M15J16-A2-2016 PAINT TWO COMPONENT COLOR COAT FOR PLASTIC INTERIOR BASE CLEAR COAT SYSTEM LOW GLOSS (C-L) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M15J16-A.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 03 2016 04 05 Revised See Summary of Revisions for Details J. Bilko, NA 2009 05 21 Revised See Summary of revisions for details Global Paint Team 2004 05 27 Activated C. Lin Controlled document at www.MATS.com Copyright 2016, Ford Global

2、 Technologies, LLC Page 1 of 10 PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR WSS-M15J16-A1 BASE/CLEAR COAT SYSTEM, HIGH GLOSS PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR WSS-M15J16-A2 BASE/CLEAR COAT SYSTEM, LOW GLOSS (C-L) 1. SCOPE The material defined by these specifications is

3、a pigmented two-component basecoat/clear coat system suitable for first surface application to interior plastic parts. 2. APPLICATION These specifications were released originally as a decorative finish for interior parts. All painted parts must meet WSS-M2P188-B1/Latest. All paint applicators must

4、meet the Interior Parts Painter Approval Process (WSS-M2P195-A). These paint systems are typically used to decorate interior visible surfaces (i.e. steering wheel bezels, switches, buttons, console, etc.). 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources.

5、Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other documents. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer. 3.2 Vehicle Interior Envir

6、onment Quality Component Performance Requirements Components used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/Latest. 3.3 PREPARATION OF TEST PANELS 3.3.1 Testing Requirement/ Specimen Preparation Tests shall be performed on plaques of appropriate substrate. See T

7、able 1 for testing requirements deleted 3.5.21, 3.5.21.1 & 3.5.21.2 ENGINEERING MATERIAL SPECIFICATION WSS-M15J16-A1/A2 Copyright 2016, Ford Global Technologies, LLC Page 10 of 10 Table 1 Approval Test Requirements for Design Validation Sample size/color New paint technology *New color approved pain

8、t technology (MCDCC signoff) New Mfg. Site (Same Raw Supplier and Material Product Code) New Mfg. Site (New Raw Supplier, Similar Raw Materials) Test Colors One light, one dark & one metallic Light Metallic Black, White, Lt. Metallic 3.4 Appearance 1 X X X X 3.5.1 Film Thickness 1 X X X X 3.5.2 Adhe

9、sion 3 X X X X 3.5.3 Water Resistance 3 X X X X 3.5.4 Abrasion Resistance 3 X X X 3.5.5 Resistance to Cleaning Agents 1 X X X 3.5.6 Long Term Heat Exposure 1 X X X X 3.5.7 Short Term Heat, Humidity and Cold Cycle 1 X X X 3.5.8 Fogging 1 X X X 3.5.9.1 Resistance to Artificial Weathering 1 X X X X 3.5

10、.9.2 Resistance to Florida Weathering 1 X X X 3.5.10 Migration Staining 1 X X X 3.5.11 High Performance Paint Adhesion 3 X X X X 3.5.12 Resistance to Water and Soap 1 X X X 3.5.13 Resistance to Window Cleaner Spotting 1 X X X 3.5.14 Resistance to Scratch 1 X X X 3.5.15 Mar Resistance (A & B Gloss Materials) 1 X X X X 3.5.16 Resistance to Scuffing 3 X X X 3.5.17 Soiling and Cleanability 1 X X X 3.5.18 Resistance to Suntan Lotion/Insect 1 X X X X 3.5.19 Perspiration Resistance 1 X X X 3.5.20 Odor 1 X X X 3.5.21 Humidity Resistance 3 X X X X *Approved paint technology on Ford ASL.