FORD WSK-M2G360-A-2015 ACTIVATOR SOLVENT FREE FOR ANAEROBICS TO BE USED WITH FORD WSS-M99P1111-A .pdf

《FORD WSK-M2G360-A-2015 ACTIVATOR SOLVENT FREE FOR ANAEROBICS TO BE USED WITH FORD WSS-M99P1111-A .pdf》由会员分享，可在线阅读，更多相关《FORD WSK-M2G360-A-2015 ACTIVATOR SOLVENT FREE FOR ANAEROBICS TO BE USED WITH FORD WSS-M99P1111-A .pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2015 02 03 N Status No replacement named L. Sinclair, NA 2003 02 28 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.9, 3.10, 4 deleted 1991 11 18 EP00E01622201000 Released B. Lange Page 1 of 2 Copyright 201

2、5, Ford Global Technologies, Inc. ACTIVATOR, SOLVENT FREE, FOR ANAEROBICS WSK-M2G360-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a solvent free, methacrylate base activator for accelerating and/or initiating the curing of anaerobic retaining adhesives. 2. A

3、PPLICATION This specification was released originally for material to be used in connection with anaerobic retaining adhesive (e.g. WSK-M2G349-A1, -A4 or -A5, preferably for inactive surfaces). Prior to adhesive application the activator has to be applied to one side of the two parts to be bonded in

4、 a thin film by brush, spray or dip. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 VISCOSITY (ASTM D 1084, METHOD B AT 23 +/- 2 C) Brookfield M

5、odel Spindle RPM mPa.s LVT/LVF 1 60 5 - 20 3.5 COLOR Blue to green 3.6 DENSITY AT 23 C 1.00 - 1.10 kg/L (ASTM D 1475) 3.7 QUALITY The material shall be a smooth homogeneous mixture, free from foreign materials and properties detrimental to normal production use. ENGINEERING MATERIAL SPECIFICATION WS

6、K-M2G360-A Page 2 of 2 Copyright 2015, Ford Global Technologies, Inc. 3.8 SOURCE OF SUPPLY This material must be bought from the same supplier as the anaerobic adhesive which will be used in connection with this activator. 5. GENERAL INFORMATION The information below is provided for clarification an

7、d assistance in meeting the requirements of this specification. 5.1 SHELF LIFE 12 months minimum from date of manufacture when stored in the original unopened container. Maintain in a cool, dry location at a temperature between 18 - 27 C. Do not return material to the original container. 5.2 PROCESS TIME, max 72 h (Application of activator til assembling of parts)