FORD WSB-M15H63-A-2009 THREAD POLYESTER SERGING TEXTURED TO BE USED WITH FORD WSS-M99P1111-A 《有纹理的包片聚酯线 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M8P5-C］》.pdf

《FORD WSB-M15H63-A-2009 THREAD POLYESTER SERGING TEXTURED TO BE USED WITH FORD WSS-M99P1111-A 《有纹理的包片聚酯线 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M8P5-C］》.pdf》由会员分享，可在线阅读，更多相关《FORD WSB-M15H63-A-2009 THREAD POLYESTER SERGING TEXTURED TO BE USED WITH FORD WSS-M99P1111-A 《有纹理的包片聚酯线 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M8P5-C］》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Release No. Released 2009 07 20 N-STATUS Replaced by WSS-M8P5-C L. Schmalz, NA 2000 07 13 Revised Para 3, Updated L. Koth 1994 03 17 Released NB00I10043054318 D.Henrickson AJS BCF Page 1 of 4 THREAD, POLYESTER, SERGING, TEXT

2、URED WSB-M15H63-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a soft, polyester textured thread. 2. APPLICATION This specification was released originally for material used as an overcast serging thread on the underside of automotive seats for mating to hook

3、fasteners. The thread is intended for use in hidden applications. Any other use that would subject it to sunlight exposure will require additional UV resistance requirements. 3. REQUIREMENTS In addition to the requirements listed herein, this material must meet the requirements of WSD-M8P5-B, except

4、 paragraphs 3.6.2 and 3.7. 3.1 QUALITY SYSTEM REQUIREMENTS Material suppliers and part producers must conform to Quality System Requirements, QS-9000. Material specification requirements are to be used for initial qualification of materials. A Control Plan for ongoing production verification is requ

5、ired. This plan must be reviewed and approved by the relevant Ford Materials activity and/or Ford Supplier Technical Assistance (STA) prior to production parts submission. Appropriate statistical tools must be used to analyze process/product data and assure consistent processing of the materials. Pa

6、rt producers using this material in their products, must use Ford approved materials and must conform to a process control plan which has been approved by STA and/or the relevant Materials Activity. 3.2 INFRARED SPECTROPHOTOMETRY AND/OR THERMAL ANALYSIS Ford Motor Company, at its option, may conduct

7、 infrared and/or thermal analysis of material/parts supplied to this specification. The IR spectra and thermograms established for initial approval shall constitute the reference standard and shall be kept on file at the designated material laboratory. All samples shall produce IR spectra and thermo

8、grams that correspond to the reference standard when tested under the same conditions. ENGINEERING MATERIAL SPECIFICATION WSB-M15H63-A Page 2 of 4 3.3 CONDITIONING AND TEST CONDITIONS All test values indicated herein are based on material conditioned in a controlled atmosphere of 23 +/- 2 C and 50 +

9、/- 5 % relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified. 3.4 APPEARANCE (FLTM BI 109-01) The color, pattern, and finish shall match the originally approved Design Center master sample, or shall be as specified on the Engineerin

10、g Drawing. 3.5 YARN CONSTRUCTION AND DESCRIPTION (ASTM D 1244) This thread shall be manufactured from individual polyester yarns having a yarn size that totals 115 tex. 3.5.1 Finished Yarn Size (ASTM D 204) The average yarn size of the finished product must not vary more than 10 % from the finished

11、yarn size of the material originally approved to this specification. 3.6 PHYSICAL REQUIREMENTS 3.6.1 Tensile Strength, min 30 N (ASTM D 204, 125 mm/minute) 3.6.2 Elongation at Break, range 20 - 40 % (ASTM D 204, 125 mm/minute) 3.6.3 Twist, min 39 turns/m (ASTM D 204) 3.7 FOGGING (SAE J1756, 3 h at 1

12、00 C heating, 21 C cooling plate, post test conditioning 1 h and 16 h) Fog Number, min 70 Formation of clear film, droplets or crystals is cause for rejection. ENGINEERING MATERIAL SPECIFICATION WSB-M15H63-A Page 3 of 4 3.8 FUNCTIONAL APPROVAL Materials being evaluated for approval to this specifica

13、tion shall be subjected to a production trial. Functional trial results must be approved by the affected assembly operation and Design Engineering. Results shall be made available to Materials Engineering prior to material approval and release. 3.9 ADDITIONAL REQUIREMENTS Specific requirements for m

14、aterial and/or manufactured parts shall be specified on the Engineering drawing, Engineering parts specification and/or performance specifications. All critical areas with respect to these properties shall be clearly designated on the engineering drawing. 3.10 SUPPLIERS RESPONSIBILITY All materials

15、supplied to this specification must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any change in the properties, composition, construction, color, processing or labeling of the material originally approved under this specification, wh

16、ether or not such changes affect the materials ability to meet the specification requirements, the Supplier shall notify Purchasing, Toxicology and the affected Materials Engineering activity of the proposed changes and obtain the written approval of the Materials Engineering activity. Test data, te

17、st samples and a new code identification are to be submitted with the request. Substance restrictions imposed by law, regulations or Ford, apply to the materials addressed by this document. The restrictions are defined in Engineering Material Specification WSS-M99P9999-A1. ENGINEERING MATERIAL SPECI

18、FICATION WSB-M15H63-A Page 4 of 4 4. APPROVAL OF MATERIALS Materials defined by this specification must have prior approval by the responsible Materials Engineering activity. Suppliers desiring approval of their materials shall first obtain an expression of interest from the affected Purchasing, Des

19、ign and Materials Engineering activity. Upon request, the Supplier shall submit to the affected Materials Engineering activity a completed copy of their laboratory test reports, signed by a qualified and authorized representative of the test facility, demonstrating full compliance with all the requi

20、rements of this specification (test results, not nominal values), the material designation and code number, and test specimens for Ford evaluation. Fords engineering approval of a material will be based on its performance to this specification and on an assessment of suitability for intended process

21、es and/or applications. Upon approval, the material will be added to the Engineering Material Approved Source List. 5. GENERAL INFORMATION The information below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 PUT UP Nominal Weight per Unit 0.45 or 0.90 kg (or as specified by manufacturing engineering 5.2 NOMINAL LENGTH PER 0.45 kg UNIT 3900 m