FORD WM 100-2013 PLUG - EXPANSION CUP CATEGORY 590 020 (This Standard is classified as Not for New Design by Ford see abstract for more information).pdf

《FORD WM 100-2013 PLUG - EXPANSION CUP CATEGORY 590 020 (This Standard is classified as Not for New Design by Ford see abstract for more information).pdf》由会员分享，可在线阅读，更多相关《FORD WM 100-2013 PLUG - EXPANSION CUP CATEGORY 590 020 (This Standard is classified as Not for New Design by Ford see abstract for more information).pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 WORLDWIDE FASTENER STANDARD 2013-05-23 Printed Copies are uncontrolled Copyright 2013, Ford Global Technologies, LLC. Page 1 of 1 Made NOT FOR NEW DESIGN and moved SS parts to WM104 2013 05 23 WM 100 PLUG - EXPANSION CUP CATEGORY 590.020 Dimensions in mm Diameter d h1h2r1r2s FORD PART NUMBERS Nom.

2、max. min. max. min. min. ref. +/- 0.1 typ. 0.08 8 8.155 8.097 3.3 2.7 1 20 1 0.75 W528000 10 10.155 10.097 3.3 2.7 1 25 1 0.75 W528001 12 12.2 12.13 4.375 3.625 1.3 30 1 1 W528002 14 14.2 14.13 5.375 4.625 1.7 35 1 1 W528003 16 16.22 16.15 5.375 4.625 1.7 40 1 1 W528004 18 18.22 18.15 6.375 5.625 2

3、45 1 1 W528005 20 20.272 20.188 6.375 5.625 2 50 1 1 W528006 22 22.272 22.188 7.45 6.55 2.3 55 1.6 1.5 W528007 25 25.302 25.218 8.45 7.55 2.7 60 1.6 1.5 W528008 28 28.302 28.218 9.75 8.25 3 70 1.6 1.5 W528009 32 32.374 32.274 10.75 9.25 3.3 80 1.6 1.5 W528010 36 36.374 36.274 11.9 10.1 3.7 90 1.6 1.

4、5 W528011 40 40.374 40.274 12.9 11.1 4 100 1.6 1.5 W528012 Material: Carbon Steel: ASTM A1008/A 1008M CS Type A or ASTM A1011/A 1011M CS Type A or EN 10111 DD12/DD13 or EN 10139 DC03 General Specifications: Recommended bore sizes must conform to WM 900. Finish: WX 100 Example Description: W 5 2 8 0 0 0 P L U G 8 E X P C U P