FORD SK-M99J9577-A-2012 ADDITION AGENT FOR ELECTROPHORETIC PRIMERS TO BE USED WITH FORD WSS-M99P1111-A 《电泳底漆添加剂 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD SK-M99J9577-A-2012 ADDITION AGENT FOR ELECTROPHORETIC PRIMERS TO BE USED WITH FORD WSS-M99P1111-A 《电泳底漆添加剂 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD SK-M99J9577-A-2012 ADDITION AGENT FOR ELECTROPHORETIC PRIMERS TO BE USED WITH FORD WSS-M99P1111-A 《电泳底漆添加剂 与福特WSS-M99P1111-A 一起使用》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 03 21 N Status No replacement named N. Benipal, NA 2006 02 20 Revised Inserted 3.0; Deleted 3.6 and 4 1975 07 16 Released SM/ET0946TP Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 1 ADDITI

2、ON AGENT FOR ELECTROPHORETIC PRIMERS SK-M99J9577-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an addition agent for electrophoretic primers. 2. APPLICATION The material is used to counteract any low molecular weight losses that may arise from drag-out of ult

3、rafiltration. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-

4、A). 3.1 NON-VOLATILE (FLTM BI 120-08) According to initial sample report +/- 1%. 3.2 DENSITY at 20 C (ASTM D 1298-55) According to initial sample report +/- 0.05. 3.3 Ph-VALUE According to initial sample report +/- 0.5. 3.4 FLASH POINT The flash point shall conform to the safety regulations applicable to the plant and/or country where the material shall be used. 3.5 TOXICITY Contents of toxic components, e.g. benzene, chlorinated hydrocarbons, lead compounds, etc., shall conform to the safety regulations currently prevailing in the plant and/or country where the material shall be used.