FORD S-M1B4-2009 SPECIAL TEST SOAP TO BE USED WITH FORD WSS-M99P1111-A 《肥皂的特殊试验 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD S-M1B4-2009 SPECIAL TEST SOAP TO BE USED WITH FORD WSS-M99P1111-A 《肥皂的特殊试验 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD S-M1B4-2009 SPECIAL TEST SOAP TO BE USED WITH FORD WSS-M99P1111-A 《肥皂的特殊试验 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 06 03 N-STATUS No Replacement Named A. Wedepohl, NA 2003 03 14 Revised Para 3.0 inserted ; Para 3.6 deleted; Revised Para 3.5 1968 12 19 Last Release EC/61232-KP Printed copies are uncontrolled Page 1 o

2、f 1 Copyright 2009, Ford Global Technologies, Inc. SPECIAL TEST SOAP S-M1B4 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a special test soap. 2. APPLICATION This specification was released originally for material used for evaluating “soap spot“ resistance of p

3、aint finishes according to FLTM EU-BI 13-1. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 CHEMICAL COMPOSITION Sodium-dodecylbenzene-sulfonate

4、50 % by weight 3.2 FORM White, high viscosity liquid with tendency to settling 3.3 pH-VALUE 9 +/- 1 (Material as received) 3.4 PROCESS-CONCENTRATION 3 % of the material as supplied (50 %) must be well stirred up and reduced to usage concentration (1.5 %) with distilled water. 3.5 Legal, health, safety and environmental constraints may apply to the materials which are submitted for approval to this specification. Refer to Engineering Material Specification WSS-M99P9999-A1.