FORD F-5-2003 MANUFACTURING TOOLING (Version 28).pdf

《FORD F-5-2003 MANUFACTURING TOOLING (Version 28).pdf》由会员分享，可在线阅读，更多相关《FORD F-5-2003 MANUFACTURING TOOLING (Version 28).pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 FECDS F-5 Engineering CAD & Drafting Standards Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. Version 28 TOC Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: None F51 Printed copies are uncontrolled.MANUFACTURI

2、NG TOOLING 1 INTRODUCTION Tooling Drawings (i.e. Tool Layouts) are used to show detailed information relevant to the manufacturing tooling equipment. This Standard is intended as a place holder for future standards related to Tooling Drawings. 2 DEFINITIONS (Reserved) 3 REQUIREMENTS (Reserved) 4 SPECIFICATIONS (Reserved) 5 ADDENDUM (Reserved)