FORD ESF-M7C49-A-2014 RUST PREVENTIVE - THIN FILM TO BE USED WITH FORD WSS-M99P1111-A .pdf

《FORD ESF-M7C49-A-2014 RUST PREVENTIVE - THIN FILM TO BE USED WITH FORD WSS-M99P1111-A .pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M7C49-A-2014 RUST PREVENTIVE - THIN FILM TO BE USED WITH FORD WSS-M99P1111-A .pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2014 11 18 N Status No longer used replace with material supplier and trade name G. Weber, NA 2004 03 25 Revised Para 3.0 inserted; paras 3.8 and 4 deleted 1972 09 05 Released F66-7 Copyright 2014, Ford Global Technologies, LLC Page 1 of 1 RU

2、ST PREVENTIVE - THIN FILM ESF-M7C49-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a thin-film rust and corrosion preventive. 2. APPLICATION This specification was released originally for material used for protecting the lever assemblies of starting motor driv

3、es against rust and corrosion. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 SPECIFIC GRAVITY, min 0.750 (ASTM D 1298) 3.2 VISCOSITY AT 37.8 C 1.4 - 1.8 cSt (mm2/s) (ASTM D 445) 3.3 FLASH POINT, min 38 C (ASTM D 92) 3.4 FIRE POINT, min 38 C (ASTM D 92) 3.5 POUR POINT, max -32 C (ASTM D 97) 3.6 NON-VOLATILE CONTENT, min 5% (FLTM AJ 102-01) 3.7 CORROSION RESISTANCE, min 10 days (FLTM BJ 107-03)