FORD ESF-M7C33-A-2012 OIL PRESERVATIVE LUBRICATING (SAE 5W) TO BE USED WITH FORD WSS-M99P1111-A 《石油 防腐剂润滑剂(美国汽车工程师协会5W) 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD ESF-M7C33-A-2012 OIL PRESERVATIVE LUBRICATING (SAE 5W) TO BE USED WITH FORD WSS-M99P1111-A 《石油 防腐剂润滑剂(美国汽车工程师协会5W) 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M7C33-A-2012 OIL PRESERVATIVE LUBRICATING (SAE 5W) TO BE USED WITH FORD WSS-M99P1111-A 《石油 防腐剂润滑剂(美国汽车工程师协会5W) 与福特WSS-M99P1111-A 一起使用》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 04 05 N Status No usage or replacement N. Benipal, NA 2004 03 25 Revised Para 3.0 inserted; paras 3.9 and 4 deleted 1964 03 13 Released F6-1281 Controlled document at www.MATS Copyright 2012 Ford Global Technologies, LLC Page 1 of

2、 1 OIL, PRESERVATIVE LUBRICATING (SAE 5W) ESF-M7C33-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a preservative engine oil consisting of a blend of highly refined, mineral, lubricating oil with suitable additives that meets the requirements of Military Speci

3、fication MIL-L-21260 and is equivalent in viscosity to SAE 5W. 2. APPLICATION This specification was released originally for oil used to lubricate the speedometer frame assembly bearing. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must con

4、form to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 VISCOSITY (ASTM D 88) 3.1.1 At -17.8 C, max 863.5 cS (mm2/s) 3.1.2 At 98.9 C, min 3.9 cSt (mm2/s) 3.2 POUR POINT, max -35 C (ASTM D 97) 3.3 FLASH POINT, min 166 C (ASTM D 92) 3.4 FIRE POINT, min 188 C (ASTM D 92) 3.5 ACID NEUTRALIZING (FLTM BJ 008-01) No corrosion, staining or other attack shall be evident on the panels. 3.6 VOLATILE MATTER, max 2% (ASTM D 972, 4 h at 100 C) 3.7 WATER CONTENT None (ASTM D 95) 3.8 HUMIDITY CORROSION RESISTANCE, min 200 h (FLTM BJ 107-03) Note: Similar to M-4834-C.