FORD ESF-M3G46-A-2005 TAPE PRESSURE SENSITIVE - CREPED PAPER - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色绉纹纸压敏胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESF-M3G46-A-2005 TAPE PRESSURE SENSITIVE - CREPED PAPER - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色绉纹纸压敏胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M3G46-A-2005 TAPE PRESSURE SENSITIVE - CREPED PAPER - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色绉纹纸压敏胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 09 20 Revised Inserted 3.0; Deleted 3.1, 3.6, 4 1978 06 12 Metricated, Renumbered & Retyped CF4H-RD 567168-21 1963 06 25 Released F6-1073 Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 TAPE, PRES

2、SURE SENSITIVE - CREPED PAPER BLACK ESF-M3G46-A 1. SCOPE The material defined by this specification is a creped paper backed tape saturated with rubber to give moisture resistance and opacity. This backing is coated with a rubber resin pressure sensitive adhesive. 2. APPLICATION This specification w

3、as released originally for material used as a light seal for instrument cluster light baffles. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 TH

4、ICKNESS 0.006 - 0.009 in (0.15 - 0.23 mm) 3.3 TENSILE STRENGTH, min 18 lb/in (3.2 N/mm) width (ASTM D 1000, 12 in (305 mm)/min rate of pull) Elongation, min 8.0% 3.4 ADHESION TO STEEL, min 30 oz/in (328 N/m) width (ASTM D 1000) 3.5 LIGHT SEAL PROPERTIES Applied over an opening shall not allow any light leakage from a 2 cd (lm/m2) light source.