FORD ESB-M1C99-A-2008 PETROLATUM - PALE YELLOW - TO BE USED WITH FORD WSS-M99P1111-A 《浅黄色矿脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSD-M1C226-A FORD WSD-M1C226-A FORD WSD-M1C226-A.pdf

《FORD ESB-M1C99-A-2008 PETROLATUM - PALE YELLOW - TO BE USED WITH FORD WSS-M99P1111-A 《浅黄色矿脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSD-M1C226-A FORD WSD-M1C226-A FORD WSD-M1C226-A.pdf》由会员分享，可在线阅读，更多相关《FORD ESB-M1C99-A-2008 PETROLATUM - PALE YELLOW - TO BE USED WITH FORD WSS-M99P1111-A 《浅黄色矿脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSD-M1C226-A FORD WSD-M1C226-A FORD WSD-M1C226-A.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 09 N-STATUS Replaced by WSD-M1C226-A L. Schmalz, FNA 2003 10 23 Revised Para 3.0 inserted; paras 3.6 and 4 deleted 1963 06 05 Released ASI #915 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 1 of 1

2、PETROLATUM - PALE YELLOW ESB-M1C99-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a pale yellow petrolatum. 2. APPLICATION This specification was released originally for material used as a lubricant on wiring assembly contacts. 3. REQUIREMENTS 3.0 STANDARD REQ

3、UIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 MAXIMUM COLOR #2 - 1/2 (ASTM D 1500) 3.2 MELTING POINT 55 C - 60 C (ASTM D 127) 3.3 CONE PENETRATION, (mm/10) 190 - 200 (ASTM D 937) 3.4 CHEMICAL COMPOSITION (ASTM D 128) Ash None Mineral Acids None Maximum Organic Acidity (as Oleic) 0.1% 3.5 QUALITY The material shall be free from moisture, tarry and/or suspended matter.