ETSI TS 186 009-3-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Interworking between Session Initiation Protocol (SIP) and C) .pdf

《ETSI TS 186 009-3-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Interworking between Session Initiation Protocol (SIP) and C) .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 186 009-3-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Interworking between Session Initiation Protocol (SIP) and C) .pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 186 009-3 V2.1.1 (2009-09)Technical Specification Telecommunications and Internet converged Servicesand Protocols for Advanced Networking (TISPAN);Interworking between Session Initiation Protocol (SIP) andBearer Independent Call Control Protocol (BICC) orISDN User Part (ISUP);Part 3: Abstra

2、ct Test Suite (ATS) andpartial Protocol Implementation eXtraInformation for Testing (PIXIT)floppy3ETSI ETSI TS 186 009-3 V2.1.1 (2009-09)2Reference DTS/TISPAN-06025-3-NGN-R2 Keywords ATS, BICC, IMS, interworking, ISUP, PIXIT, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex -

3、FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document ma

4、y be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF ver

5、sion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp

6、 If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to r

7、eproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit o

8、f its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 009-3 V2.1.1 (2009-

9、09)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Abstract Test Method (ATM) . 9g34.1 Network architecture 9g34.2 Protocol

10、architecture. 10g34.3 Test architecture . 10g34.3.1 Interconnection of TS and SUT 10g34.3.2 Test system architecture 11g34.3.2.1 General 11g34.3.2.2 Structure 11g34.3.2.3 Interaction between TTCN-3 Executable (TE) and SUT Adapter (SA) 12g34.3.2.3.1 Control of the SUT Adapter (SA) by using ASPs . 12g

11、34.3.2.3.2 Sending and receiving SIP and ISUP/BICC messages 16g34.3.2.3.2.1 General . 16g34.3.2.3.2.2 Sending and receiving SIP/IMS messages . 16g34.3.2.3.2.3 Security and messages compression feature 17g34.3.2.3.2.4 Additional SA constraints 17g34.3.2.3.3 Encoding/Decoding System requirements . 17g

12、35 The ATS development process . 21g35.1 Requirements and Test Purposes 21g35.2 ATS structure . 21g35.2.1 Test case grouping 21g35.2.2 Test case identifiers 22g35.3 ATS specification framework . 23g35.3.1 ATS Library 23g35.3.2 Use of TTCN-3 . 24g35.3.2.1 General 24g35.3.2.2 TTCN-3 naming conventions

13、 25g35.3.2.3 Additional TTCN-3 IMS/SIP and ISUP naming convention 26g35.3.2.4 Additional concepts and conventions 27g35.3.2.5 PICS information 27g35.3.2.6 TTCN-3 comment tags 27g35.4 ATS archive 29g3Annex A (normative): Partial PIXIT proforma 30g3A.1 Introduction 30g3A.2 PIXIT items 30g3A.2.1 Common

14、 PIXIT related to SIP and ISUP/BICC. 31g3A.2.2 SIP/IMS -related PIXIT 34g3A.2.3 ISUP/BICC-related PIXIT . 35g3Annex B (informative): TTCN-3 library modules . 47g3B.1 Electronic annex, zip file with TTCN-3 code 47g3History 48 ETSI ETSI TS 186 009-3 V2.1.1 (2009-09)4Intellectual Property Rights IPRs e

15、ssential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or poten

16、tially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried o

17、ut by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Com

18、mittee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 3 of a multi-part deliverable covering the Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol (BICC) or ISDN User Pa

19、rt (ISUP), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)“; ETSI ETSI TS 186 009-3 V2.1.1 (2009-09)5

20、1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the Testsuite Structure and Testpurposes defined in TS 186 009-2 1. The TSS the testing architecture; the test methods and port definitions

21、; the test configurations; the design principles, assumptions, and used interfaces to the TTCN3 tester (System Simulator); TTCN styles and conventions; the partial PIXIT proforma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (IXIT)

22、Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply.

23、Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced doc

24、uments which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. ETSI ETSI TS 186 009-3 V2.1.1 (2009

25、-09)62.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI

26、TS 186 009-2 (Release 2): “Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN); SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN)subsystem and Circuit Switched (CS) networks; Part 2: Test Suite Structure and Test Purposes (TSS Intern

27、et Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 3 ETSI TS 186 009-1 (Release 2): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN)subsystem and Circuit Switch

28、ed (CS) networks; Part 1: Protocol Implementation Conformance Statement (PICS)“. NOTE: The latest version v2.y.z applies 4 ETSI TS 129 163 (V7.12.0): “Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Interworking between the IP Multimedia (IM) C

29、ore Network (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 Release 7).“. 5 ETSI TS 129 527: “ Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); TISPAN; Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) C

30、ore Network (CN) subsystem and Circuit Switched (CS) networks 3GPP TS 29.163 (Release 7), modified (3GPP TS 29.527 version 8.2.0 Release 8)“. 6 ITU-T Recommendation Q.2150.1 (2001): “Signalling Transport Converter on MTP3 and MTP3b“. 7 ETSI TS 102 027-3 (V3.1.1): “Methods for Testing and Specificati

31、on (MTS); Conformance Test Specification for SIP (IETF RFC 3261); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma“. 8 ETSI ES 201 873-1 (V3.1.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation v

32、ersion 3; Part 1: TTCN-3 Core Language“. 9 ETSI ES 201 873-5 (V3.1.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)“. 10 ETSI ES 201 873-6 (V3.1.1): “Methods for Testing and Specification (MTS); The Testing and

33、Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI)“. 11 ISO/IEC 9646-1 (1992): “Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General concepts“. 12 ISO/IEC 9646-7 (1994): “Conformance testing methodology and frame

34、work - Part 7: Implementation Conformance Statement“. 13 ITU-T Recommendation Q.761 (2000): “Specifications of Signalling System No.7 ISDN User Part (ISUP)“. 14 ITU-T Recommendation Q.762 (2000): “Specifications of Signalling System No.7 ISDN User Part (ISUP)“. 15 ITU-T Recommendation Q.763 (2000):

35、“Specifications of Signalling System No.7 ISDN User Part (ISUP); ISDN user part formats and codes“. 16 ITU-T Recommendation Q.764 (2000): “Specifications of Signalling System No.7 ISDN User Part (ISUP)“. ETSI ETSI TS 186 009-3 V2.1.1 (2009-09)717 IETF RFC 3261 (2002): “SIP: Session Initiation Protoc

36、ol“. 18 ITU-T Recommendation E.164: “The international public telecommunication numbering plan“. 19 ETSI EN 300 356-1 (V4.2.1): “Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 4 for the international interface; Part 1: Basic services ITU-T Rec

37、ommendations Q.761 to Q.764 (1999) modified“. 20 ITU-T Recommendation Q.931: “ISDN user-network interface layer 3 specification for basic call control“. 21 ETSI EN 300 097-1: “Integrated Services Digital Network (ISDN); Connected Line Identification Presentation (COLP) supplementary service; Digital

38、 Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification “. 22 IETF RFC 2617: “HTTP Authentication: Basic and Digest Access Authentication“. 23 IETF RFC 1321: “The MD5 Message-Digest Algorithm“. 2.2 Informative references The following referenced documents are not essent

39、ial to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of

40、 the present document, the terms and definitions given in: SIP/ISUP interworking reference specification is defined in TS 129 163 4 and TS 129 527 5; ISDN layer 3 reference specification is defined in EN 300 356-1 19; ISDN User Part (ISUP) reference specification are defined in EN 300 356-1 19; ISO/

41、IEC 9646-1 11 and ISO/IEC 9646-7 12; ES 201 873-1 8 (TTCN-3). and the following apply: Abstract Test Case (ATC): complete and independent specification of the actions required to achieve a specific test purpose, defined at the level of abstraction of a particular Abstract Test Method, starting in a

42、stable testing state and ending in a stable testing state Abstract Test Method (ATM): description of how an IUT is to be tested, given at an appropriate level of abstraction to make the description independent of any particular realization of a Means of Testing, but with enough detail to enable abst

43、ract test cases to be specified for this method Abstract Test Suite (ATS): test suite composed of abstract test cases Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relationship, being part of a real open system which is to be studied by tes

44、ting Means of Testing (MOT): combination of equipment and procedures that can perform the derivation, selection, parameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a conformance log ETSI ETSI TS 186 009-3 V2.1.1 (2009-09)8PICS proforma: do

45、cument, in the form of a questionnaire, which when completed for an implementation or system becomes the PICS PIXIT proforma: document, in the form of a questionnaire, which when completed for the IUT becomes the PIXIT point of Control and Observation: point within a testing environment where the oc

46、currence of test events is to be controlled and observed, as defined in an Abstract Test Method pre-test condition: setting or state in the IUT which cannot be achieved by providing stimulus from the test environment Protocol Implementation Conformance Statement (PICS): statement made by the supplie

47、r of a protocol claimed to conform to a given specification, stating which capabilities have been implemented Protocol Implementation eXtra Information for Testing (PIXIT): statement made by a supplier or implementor of an IUT (protocol) which contains or references all of the information related to

48、 the IUT and its testing environment, which will enable the test laboratory to run an appropriate test suite against the IUT SIP number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 18 System Under Test (SUT): real open system in which the IUT resides 3.2

49、Abbreviations For the purposes of the present document, the abbreviations given in ITU-T Recommendation Q.762 14 and the following apply: ASP Abstract Service Primitive NOTE: Exchanged between entities inside the TS or between the user of the ATS (operator) and the TS. ATC Abstract Test Case ATM Abstract Test Method ATM Asynchroneous Transfer Mode ATS Abstract Test Suite BCI Backward Call Indicators BICC Bearer Independent Call Control CIC Circuit Identification Code DSS1 Digital S