ETSI TS 144 069-2016 Digital cellular telecommunications system (Phase 2+) Broadcast Call Control (BCC) protocol (V13 0 0 3GPP TS 44 069 version 13 0 0 Release 13)《数字蜂窝通信系统(第2+阶段) .pdf

《ETSI TS 144 069-2016 Digital cellular telecommunications system (Phase 2+) Broadcast Call Control (BCC) protocol (V13 0 0 3GPP TS 44 069 version 13 0 0 Release 13)《数字蜂窝通信系统(第2+阶段) .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 144 069-2016 Digital cellular telecommunications system (Phase 2+) Broadcast Call Control (BCC) protocol (V13 0 0 3GPP TS 44 069 version 13 0 0 Release 13)《数字蜂窝通信系统(第2+阶段) .pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoBroadcast C(3GPP TS 44.0TECHNICAL SPECIFICATION144 069 V13.0.0 (2016communications system (Phat Call Control (BCC) protocol .069 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); 13) TEM FOR ICATIONSRETSI ETSI TS 144 069 V13.0.0 (2016-01)13GPP TS 44.

2、069 version 13.0.0 Release 13Reference RTS/TSGC-0144069vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N

3、 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the

4、prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the prese

5、nt document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of t

6、he following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of t

7、he PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of

8、ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 144 069 V13.0.0 (2016-01)23GPP TS 4

9、4.069 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR

10、000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inves

11、tigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specif

12、ication (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverabl

13、es. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interprete

14、d as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 144 069 V13.0.0 (2016-01)33GPP TS 44.069 version 13.0.0 Release 13Contents Intellectua

15、l Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Applicability . 7g35 Main concepts 7g36 Elementary procedures for Broadcast Call Control 8g36.1 Overview 8g36.1.1 Ge

16、neral 8g36.1.2 Broadcast call control states 8g36.1.2.1 Broadcast call control states at the MS side of the interface . 8g36.1.2.1.1 Attributes and Parameters of BCC in the MS 8g36.1.2.1.2 NULL (U0) 9g36.1.2.1.3 MM CONNECTION PENDING (U0.p) . 9g36.1.2.1.4 BROADCAST CALL INITIATED (U1) 9g36.1.2.1.5 B

17、ROADCAST CALL ACTIVE (U2) . 9g36.1.2.1.6 BROADCAST CALL PRESENT (U3) . 9g36.1.2.1.7 BROADCAST CALL CONNECTION REQUESTED (U4) 9g36.1.2.1.8 TERMINATION REQUESTED (U5) . 9g36.1.2.1.9 RECEIVE MODE ACTIVE (U6) . 10g36.1.2.1.10 BCC TIMERS IN THE MS . 10g36.1.2.1.11 CONSISTENCY OF PARAMETERS AND STATES . 1

18、0g36.1.2.2 BROADCAST CALL CONTROL STATES AT THE NETWORK SIDE OF THE INTERFACE . 10g36.1.2.2.1 NULL (State N0) . 10g36.1.2.2.2 BROADCAST CALL INITIATED (N1) 11g36.1.2.2.3 BROADCAST CALL ACTIVE (N2) . 11g36.1.2.2.4 BROADCAST CALL ESTABLISHMENT PROCEEDING (N3) . 11g36.1.2.2.5 TERMINATION REQUESTED (N4)

19、 . 11g36.2 Procedures for establishment of a broadcast call 11g36.2.1 Activation of a broadcast call by the network . 11g36.2.2 Mobile originated establishment . 11g36.2.2.1 Termination during mobile originated establishment 12g36.2.2.2 Abnormal cases . 12g36.2.3 Mobile terminating broadcast call es

20、tablishment in the MS . 12g36.3 Procedures during the active state and receive mode active state of a broadcast call 13g36.3.1 Mobile station procedures in the active state 13g36.3.2 Network procedures in the active state . 13g36.3.3 Mobile station procedures in the RECEIVE MODE ACTIVE state . 13g36

21、.4 Procedures for release, abortion, and termination of a broadcast call 13g36.4.1 Termination procedure 13g36.4.2 Abort and release procedures 14g36.5 Miscellaneous procedures 14g36.5.1 Status procedures 14g36.5.1.1 Get status procedure 14g36.5.1.2 Set parameter procedure 14g37 Handling of unknown,

22、 unforeseen, and erroneous protocol data . 15g3ETSI ETSI TS 144 069 V13.0.0 (2016-01)43GPP TS 44.069 version 13.0.0 Release 137.1 General . 15g37.2 Message too short . 15g37.3 Unknown or unforeseen transaction identifier . 15g37.4 Unknown or unforeseen message type . 15g37.5 Non-semantical mandatory

23、 information element errors . 16g37.6 Unknown and unforeseen information elements in the non-imperative message part . 16g37.6.1 Information elements unknown in the message 16g37.6.2 Out of sequence information elements 16g37.6.3 Repeated Information elements 16g37.7 Non-imperative message part erro

24、rs . 16g37.7.1 Syntactically incorrect optional Information elements . 16g37.8 Messages with semantically incorrect contents 17g38 Message functional definitions and contents 17g38.1 CONNECT . 18g38.2 GET STATUS 18g38.2.1 mobile identity 18g38.3 IMMEDIATE SETUP 19g38.3.1 Mobile identity 19g38.3a IMM

25、EDIATE SETUP 2 . 19g38.3a.1 TMSI . 20g38.3a.2 Compressed otdi . 20g38.4 SET PARAMETER 20g38.5 SETUP 20g38.5.1 Originator-to-dispatcher information 21g38.6 STATUS . 21g38.6.1 Call state . 21g38.6.2 State attributes 22g38.7 TERMINATION 22g38.8 TERMINATION REJECT . 22g38.9 TERMINATION REQUEST . 23g39 C

26、ontents of information elements value parts 23g39.1 Protocol Discriminator . 23g39.2 Transaction identifier . 23g39.3 Message Type . 23g39.4 Other information elements 24g39.4.1 Call Reference 24g39.4.2 Call state . 25g39.4.3 Cause 26g39.4.4 Originator indication . 27g39.4.5 Spare Half Octet . 28g39

27、.4.6 State attributes 28g39.4.7 Compressed otdi . 28g3Annex A (informative): Example of the coding of the user-user information after decompression of the originator-to-dispatcher information 29g3Annex B (informative): Change History 30g3History 31g3ETSI ETSI TS 144 069 V13.0.0 (2016-01)53GPP TS 44.

28、069 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of

29、 the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document

30、under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 144 069 V13.0.0 (2016-01)63GPP TS 44.069 ver

31、sion 13.0.0 Release 131 Scope The present document specifies the Broadcast Call Control (BCC) protocol used by the Voice Broadcast Call Service (VBCS) on the radio interface. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the p

32、resent document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP docum

33、ent (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void. 1a 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 42.069: “Voice Broadcast Service (VBS); Stage 1“. 3 3GPP TS 23.003

34、: “Numbering, addressing and identification“. 4 3GPP TS 23.067: “enhanced Multi-Level Precedence and Pre-emption service (eMLPP); Stage 2“. 5 3GPP TS 43.069: “Voice Broadcast Call Service (VBCS); Stage 2“. 6 3GPP TS 44.006: “Mobile Station - Base Station System (MS - BSS) interface; Data Link (DL) l

35、ayer specification“. 7 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 8 3GPP TS 24.008: “Mobile Radio Interface Layer 3 specification; Core Network Protocols; Stage 3“. 9 3GPP TS 44.018: “Mobile radio interface layer 3 specification; Radio Resource Control Protocol“. 1

36、0 3GPP TS 44.068: “Group Call Control (GCC) protocol“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions defined in 3GPP TS 42.069 and the following apply: Attachment of the user connection: See 3GPP TS 24.008, subclause 5.2. Broadcas

37、t call channel: downlink channel to be allocated in each cell of the group call area for a particular broadcast call. All MSs of the listening service subscribers in one cell shall listen to the common downlink. Broadcast call: is used in the same sense as “voice broadcast call“. Calling user: BCC e

38、ntity in the Mobile Station (MS) initiating or having initiated a broadcast call. ETSI ETSI TS 144 069 V13.0.0 (2016-01)73GPP TS 44.069 version 13.0.0 Release 13Clearing the context related to the broadcast call establishment: all running BCC timers in the relevant BCC entity are stopped, all attrib

39、utes in the relevant BCC entity are deleted. Downlink: network to MS direction. Group receive mode: See 3GPP TS 44.018. Originating mobile station: MS initiating or having initiated the broadcast call. Uplink: Mobile station to network direction. 3.2 Abbreviations For the purposes of the present doc

40、ument, the abbreviation defined in 3GPP TR 21.905 1a and the following applies: BCC Broadcast Call Control 4 Applicability Support of the broadcast call protocol is optional in the MS and in the network. 5 Main concepts The present document describes the broadcast call control (BCC) protocol, which

41、is one of the protocols of the Connection Management (CM) sublayer (see 3GPP TS 24.007). There is in general more than one MS engaged in a broadcast call. Consequently, there is in general more than one MS with a BCC entity engaged in the same broadcast call, and there is one BCC entity in the netwo

42、rk engaged in that broadcast call. Under which conditions a BCC message is passed from lower (sub-)layers to the BCC entity is defined in the specifications of the sub-layers. The MS shall ignore BCC messages that it receives which were sent in unacknowledged mode and which explicitly specify as des

43、tination a mobile identity which is not a mobile identity of the MS. Higher layers and the MM sub-layer decide when to accept parallel BCC transactions and when/whether to accept BCC transactions in parallel to other CM transactions. The broadcast call may be initiated by a mobile user or by a dispa

44、tcher. Specification of a protocol for dispatchers is out of the scope of the present document. Hence, in the scope of the present document, there are: - one BCC entity in the network; and - one or more than one BCC entities in different MSs; engaged in a broadcast call, and one ore none of the MSs

45、is the originator of the broadcast call (called the originating MS in the present document). NOTE: Whereas for the Group Call Control (GCC) protocol (see 3GPP TS 44.068), in certain situations, the GCC entity in a MS assumes to be the originator of a broadcast call without being the originator, this

46、 is not the case for the BCC protocol. The originator of the BCC transaction chooses the Transaction Identifier (TI). A MS not assuming to be the originator of the transaction will chose the transaction identifier received from the network, setting the TI flag to 1+x mod 2 where x is the received TI

47、 flag. ETSI ETSI TS 144 069 V13.0.0 (2016-01)83GPP TS 44.069 version 13.0.0 Release 13The present document describes the broadcast call control protocol only with regard to two peer entities, one in a MS, the other one in the network. The call control entities are described as communicating finite s

48、tate machines which exchange messages across the radio interface and communicate internally with other protocol (sub)layers. In particular, the BCC protocol uses the MM and RR sublayer specified in 3GPP TS 24.008 and 3GPP TS 44.018. The BCC entity in a MS that is not the originator of the broadcast

49、call shall not send messages to its peer entity. This description in only normative as far as the consequential externally observable behaviour is concerned. For simplicity, instead of using the terms “BCC entity in the MS“ and “BCC entity in the network“, the present document often uses the terms “MS“ and “network“ if no confusion may arise. Certain sequences of actions of the two peer entities compose “elementary procedures“ which are used as a basis for the description in the present document. These elementary procedures are defined in clause