ETSI TS 137 171-2017 Universal Mobile Telecommunications System (UMTS) LTE Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) User Equipment (UE) performance requi.pdf

《ETSI TS 137 171-2017 Universal Mobile Telecommunications System (UMTS) LTE Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) User Equipment (UE) performance requi.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 137 171-2017 Universal Mobile Telecommunications System (UMTS) LTE Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) User Equipment (UE) performance requi.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelUniversal Terrand EvoUser Equipment for RAT-Independ(3GPP TS 37.1TECHNICAL SPECIFICATION137 171 V13.1.0 (2017elecommunications System (LTE; rrestrial Radio Access (UTRAlved UTRA (E-UTRA); t (UE) performance requiremendent Positioning Enhanceme.171 version 13.1.0 Release

2、 1317-01) (UMTS); RA) ments ments 13) ETSI ETSI TS 137 171 V13.1.0 (2017-01)13GPP TS 37.171 version 13.1.0 Release 13Reference RTS/TSGR-0437171vd10 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562

3、 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of an

4、y electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Form

5、at (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSI

6、DeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, in

7、cluding photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standard

8、s Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Tr

9、ade Marks registered and owned by the GSM Association. ETSI ETSI TS 137 171 V13.1.0 (2017-01)23GPP TS 37.171 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essen

10、tial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates

11、 are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server)

12、 which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities

13、or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“,

14、 “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citati

15、on. ETSI ETSI TS 137 171 V13.1.0 (2017-01)33GPP TS 37.171 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, abbreviations and test tolerances 5g33.1 Definitions 5g33.2 Abbreviations . 6g3

16、3.3 Test tolerances 6g34 General . 6g34.1 Introduction 6g34.2 MBS Measurements . 6g34.2.1 General 6g34.2.2 MBS measurement parameters . 6g34.2.3 MBS Measurement time . 6g34.2.4 RRC states for MBS measurements 7g34.2.5 MBS Measurement Error Definitions . 7g35 MBS minimum performance requirements 8g35

17、.1 General . 8g35.2 Sensitivity . 8g35.3 Nominal Accuracy 8g35.4 Dynamic Range 8g35.5 Multipath 9g3Annex A (normative): Test Case Requirements 10g3A.1 Purpose of annex 10g3A.2 Requirement classification for statistical testing 10g3A.3 UE Measurement Procedures . 10g3A.3.1 MBS Measurement reporting d

18、elay test case . 10g3A.3.1.1 Test Purpose and Environment . 10g3A.3.1.2 Test Requirements 11g3A.4 Measurement Performance Requirements 11g3A.4.1 General . 11g3A.4.2 MBS Code Phase Measurement Accuracy Requirements in AWGN 12g3A.4.2.1 Test Purpose and Environment . 12g3A.4.2.2 Test Requirements 12g3A

19、.4.3 MBS Code Phase Measurement Accuracy Requirements in Multipath . 13g3A.4.3.1 Test Purpose and Environment . 13g3A.4.3.2 Test Requirements 13g3Annex B (informative): Change history . 14g3History 15g3ETSI ETSI TS 137 171 V13.1.0 (2017-01)43GPP TS 37.171 version 13.1.0 Release 13Foreword This Techn

20、ical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by

21、 the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incr

22、emented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 137 171 V13.1.0 (2017-01)53GPP TS 37.171 version 13.1.0 Release 131 Scope The present docume

23、nt establishes the minimum performance requirements for RAT-Independent Positioning Enhancements (e.g. MBS positioning technology) for FDD or TDD mode of UTRA and E-UTRA for the User Equipment (UE). 2 References The following documents contain provisions which, through reference in this text, consti

24、tute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case

25、of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 ETSI TR 102 273-1-2: “Electromagnetic compatibility a

26、nd Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 3 3GPP TS 36.355: “E

27、volved Universal Terrestrial Radio Access (E-UTRA); LTE Positioning Protocol (LPP)“. 4 3GPP TS 36.509: “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User Equipment (UE)“. 5 3GPP TS 36.942: Evolved Universal Terrestrial R

28、adio Access (E-UTRA); Radio Frequency (RF) system scenarios“. 6 3GPP TS 25.331: “Radio Resource Control (RRC); Protocol specification“. 7 ATIS-0500027: “Recommendations for Establishing Wide Scale Indoor Location Performance“, May 2015. 8 3GPP TS 34.109: “Terminal logical test interface; Special con

29、formance testing functions “. 9 3GPP TS 37.571-1: “Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) conformance specification for UE positioning; Part 1: Conformance test specification “. 10 3GPP TS 36.521-1: “Evolved Universal Te

30、rrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Conformance testing “. 3 Definitions, abbreviations and test tolerances 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.90

31、5 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. ETSI ETSI TS 137 171 V13.1.0 (2017-01)63GPP TS 37.171 version 13.1.0 Release 133.2 Abbreviations For the purposes of the present document, the abbre

32、viations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. AWGN Additive White Gaussian Noise EPA Extended Pedestrian A E-UTRA Evolved UMTS Terrestrial Radio A

33、ccess FDD Frequency Division Duplex LPP LTE Positioning Protocol MBS Metropolitan Beacon System RRC Radio Resource Control TDD Time Division Duplex UE User Equipment UTRA UMTS Terrestrial Radio Access 3.3 Test tolerances The requirements given in the present document make no allowance for measuremen

34、t uncertainty. The test specification 3GPP TS 37.571 -1 9 will define test tolerances. These test tolerances are individually calculated for each test. The test tolerances are then added to the limits in the present document to create test limits. The measurement results are compared against the tes

35、t limits as defined by the shared risk principle. Shared Risk is defined in ETSI TR 102 273-1-2 2, subclause 6.5. 4 General 4.1 Introduction The present document defines the minimum performance requirements for UEs that support RAT Independent positioning technologies. 4.2 MBS Measurements 4.2.1 Gen

36、eral Clause 4.2 describes the measurements performed by the UE for MBS positioning. 4.2.2 MBS measurement parameters The measurement parameters are the MBS code phase measurements contained in the TBS-MeasurementInformation IE provided in the LPP message of type PROVIDE LOCATION INFORMATION 3 for LT

37、E, and the UE Positioning AddPos measured results IE in the MEASUREMENT REPORT message for UTRA 6. 4.2.3 MBS Measurement time For LTE, MBS measurement time is defined as the time starting from the moment that the UE has received the LPP message of type REQUEST LOCATION INFORMATION, and ending when t

38、he UE starts sending the LPP message of type PROVIDE LOCATION INFORMATION on the Uu interface. The response times specified for all test cases are based on new measurements unless otherwise stated, i.e. the UE shall not re use any information on measurements or other aiding data that was previously

39、acquired or calculated and stored internally in the UE. A dedicated test message RESET UE POSITIONING STORED INFORMATION has been defined in TS 36.509 4 clause 6.9 for the purpose of deleting this information. ETSI ETSI TS 137 171 V13.1.0 (2017-01)73GPP TS 37.171 version 13.1.0 Release 13For UTRA, M

40、BS measurement time is defined as the time starting from the moment that the UE has received the final RRC measurement control message containing reporting criteria different from “No Reporting“ sent before the UE sends the measurement report containing the MBS measured results, and ending when the

41、UE starts sending the measurement report containing the measured result on the Uu interface. The response times specified for all test cases are based on new measurements unless otherwise stated, i.e. the UE shall not re use any information on measurements or other aiding data that was previously ac

42、quired or calculated and stored internally in the UE. A dedicated test message RESET UE POSITIONING STORED INFORMATION has been defined in TS 34.109 8 clause 5.4 for the purpose of deleting this information. The measurements for n MBS beacons, enabled across the slots of an MBS transmission period 7

43、, shall be available at the UE byMBS_measT , where MBS_measT can be expressed as: ocTTnceilPrMBS_TPMBS_meas)10/(10T += ms where MBS_measT is the total time for detecting and measuring n beacons is the elapsed time from the trigger of the measurement to the start of the first MBS transmission period

44、MBS_TPT is the MBS transmission period (1 second) ocTPris the processing time, an upper-bound for which can be given as slotMBSTnceil_)10/(10 where slotMBST_is the duration of a MBS slot (100 ms) with continuous MBS transmissions The last location request received by higher layers The last location

45、request received by MBS physical layer g100g68g17g94g890g100g87g3g894g1005g3g400g286g272g895 g3 g3 g1005g3g400g286g272 g3g271g381g437g374g282g258g396g455 g1005g1004g1004g3g373g400 g1005g1004g1004g3g373g400 g94g367g381g410g3g1005 g94g367g381g410g3g1006 g374g910g100g68g17g94g890g100g87g17g286g258g272g

46、381g374g3g1005 g17g286g258g272g381g374g3g1006 g100g87g396g381g272 g100g68g17g94g890g373g286g258g400Figure 4.2.3-1: MBS Measurement Time For this requirement, the assumption is that there is zero frequency offset for the beacons and the UEs have a minimum of 13 parallel correlators. The test case req

47、uirements for MBS Measurement time can be found in clause A.3. 4.2.4 RRC states for MBS measurements For LTE, the minimum MBS performance requirements are specified in clause 5 for RRC_CONNECTED state. For UTRA, the minimum MBS performance requirements are specified in clause 5 for different RRC sta

48、tes that include Cell_DCH and Cell_FACH. 4.2.5 MBS Measurement Error Definitions The code phase measurement error is defined as the difference between the actual code phase for a given MBS beacon, and the estimated code phase for that beacon, as reported in the LPP message of type PROVIDE LOCATION I

49、NFORMATION for LTE 3, and the UE Positioning AddPos measured results IE in the MEASUREMENT REPORT ETSI ETSI TS 137 171 V13.1.0 (2017-01)83GPP TS 37.171 version 13.1.0 Release 13message for UTRA 6. This difference has to then be adjusted for the measurement bias introduced by the UE clock to provide the final code phase measurement error. 5 MBS minimum performance requirements 5.1 General The minimum performance requirements specified in clause 5 apply for UEs that support MBS. This section applies to requirements f