ETSI TS 134 121-2-2017 Universal Mobile Telecommunications System (UMTS) User Equipment (UE) conformance specification Radio transmission and reception (FDD) Part 2 Implementation .pdf

《ETSI TS 134 121-2-2017 Universal Mobile Telecommunications System (UMTS) User Equipment (UE) conformance specification Radio transmission and reception (FDD) Part 2 Implementation .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 134 121-2-2017 Universal Mobile Telecommunications System (UMTS) User Equipment (UE) conformance specification Radio transmission and reception (FDD) Part 2 Implementation .pdf（89页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 13Universal Mobile TelUser Equipment (Radio transmPart 2: Implementat(3GPP TS 34.12TECHNICAL SPECIFICATION134 121-2 V12.5.0 (20elecommunications System (t (UE) conformance specificatmission and reception (FDD);tation Conformance Statemen121-2 version 12.5.0 Release 12017-02) (UMTS); cation;

2、 ); ent (ICS) e 12) ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)13GPP TS 34.121-2 version 12.5.0 Release 12Reference RTS/TSGR-0534121-2vc50 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and

4、/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、 kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatu

6、s.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocop

7、ying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017

8、. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regist

9、ered and owned by the GSM Association. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)23GPP TS 34.121-2 version 12.5.0 Release 12Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, i

10、f any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availab

11、le on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are,

12、or may be, or may become, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cros

13、s reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as describ

14、ed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)33GPP TS 34.121-2 version 12.5.0 Release 12Contents Intellectual Proper

15、ty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Recommended test case applicability . 7g3Annex A (normative): ICS proforma for 3rdGeneration User Equipment

16、66g3A.1 Guidance for completing the ICS proforma . 66g3A.1.1 Purposes and structure 66g3A.1.2 Abbreviations and conventions 66g3A.1.3 Instructions for completing the ICS proforma 67g3A.2 Identification of the User Equipment . 67g3A.2.1 Date of the statement 67g3A.2.2 User Equipment Under Test (UEUT)

17、 identification . 67g3A.2.3 Product supplier 68g3A.2.4 Client 68g3A.2.5 ICS contact person 69g3A.3 Identification of the protocol 69g3A.4 ICS proforma tables 69g3A.4.1 UE Implementation Types 69g3A.4.2 UE Service Capabilities 70g3A.4.3 Baseline Implementation Capabilities 70g3A.4.4 Additional inform

18、ation . 76g3A.4.5 Feature group indicators . 81g3Annex B (informative): Labelling of Inter-RAT RRM test cases 82g3B.1 FDD/GSM band combinations for inter-RAT RRM tests 82g3Annex C (informative): Change history . 83g3History 88g3ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)43GPP TS 34.121-2 version 12.5.0

19、 Release 12Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the presen

20、t document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under chang

21、e control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part 2 of a multi-parts TS: 3GP

22、P TS 34.121-1 20: User Equipment (UE) conformance specification; Radio transmission and reception (FDD); Part 1: Conformance specification. 3GPP TS 34.121-2: User Equipment (UE) conformance specification; Radio transmission and reception (FDD); Part 2: Implementation Conformance Statement (ICS). NOT

23、E: TS 34.121 has been converted to multipart TS with version 7.0.0. Previous versions are a single part standard 34.121. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)53GPP TS 34.121-2 version 12.5.0 Release 121 Scope The present document provides the Implementation Conformance Statement (ICS) proforma fo

24、r 3rdGeneration User Equipment (UE), in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 2 and ETS 300 406 3. The present document also specifies a recommended applicability statement for the test cases included in TS 34.121-1. These app

25、licability statements are based on the features implemented in the UE. Special conformance testing functions can be found in 3GPP TS 34.109 19 and the common test environments are included in 3GPP TS 34.108 18 and 3GPP TS 36.508 29. The present document is valid for UE implemented according to 3GPP

26、releases starting from Release 99 up to the Release indicated on the cover page of the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of

27、 publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly re

28、fers to the latest version of that document in the same Release as the present document unless the context in which the reference is made suggests a different Release is relevant (information on the applicable release in a particular context can be found in e.g. test case title, description or appli

29、cability, message description or content). - For a Release 1999 UE, references to 3GPP documents are to version 3.x.y, when available. - For a Release 4 UE, references to 3GPP documents are to version 4.x.y, when available. - For a Release 5 UE, references to 3GPP documents are to version 5.x.y, whe

30、n available. - For a Release 6 UE, references to 3GPP documents are to version 6.x.y, when available. - For a Release 7 UE, references to 3GPP documents are to version 7.x.y, when available. - For a Release 8 UE, references to 3GPP documents are to version 8.x.y, when available. - For a Release 9 UE

31、, references to 3GPP documents are to version 9.x.y, when available. 1 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 2 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Confor

32、mance testing methodology and framework - Part 7: Implementation Conformance Statements“. 3 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 4 3GPP TR 21.904: “UE capability requirements“. 5

33、3GPP TS 22.002: “Circuit Bearer Services (BS) supported by Public Land Mobile Network (PLMN)“. 6 3GPP TS 22.060: “General Packet Radio Service (GPRS); Service description, Stage 1“. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)63GPP TS 34.121-2 version 12.5.0 Release 127 3GPP TS 22.105: “Services and Ser

34、vice Capabilities“. 8 3GPP TS 24.008: “Mobile radio interface Layer 3 specification; Core Network Protocols - Stage 3“. 9 3GPP TS 25.101: “UE radio Transmission and Reception (FDD)“. 10 3GPP TS 25.102: “UTRA (UE) TDD; Radio Transmission and Reception“. 11 3GPP TS 25.201: “Physical layer - General De

35、scription“. 12 3GPP TS 25.306: “UE Radio Access Capabilities“. 13 3GPP TS 25.321: “Medium Access Control (MAC) protocol specification“. 14 3GPP TS 25.322: “Radio Link Control (RLC) protocol specification“. 15 3GPP TS 25.323: “Packet Data Convergence Protocol (PDCP) specification“. 16 3GPP TS 25.324:

36、 “Broadcast/Multicast Control BMC“. 17 3GPP TS 25.331: “Radio Resource Control (RRC) protocol specification“. 18 3GPP TS 34.108: “Common Test Environments for User Equipment (UE) Conformance Testing“. 19 3GPP TS 34.109: “Terminal logical test interface; Special conformance testing functions“. 20 3GP

37、P TS 34.121-1: “User Equipment (UE) Conformance Specification, Radio transmission and reception (FDD); Part 1: Conformance specification“. 21 3GPP TS 34.122: “Terminal Conformance Specification, Radio Transmission and Reception (TDD)“. 22 3GPP TS 34.123-1: “User Equipment (UE) conformance specificat

38、ion; Part 1: Protocol conformance specification“. 23 3GPP TS 34.123-2: “ User Equipment (UE) conformance specification; Part 2: Implementation Conformance Statement (ICS) proforma specification“. 24 3GPP TS 34.123-3: “User Equipment (UE) conformance specification; Part 3: Abstract Test Suites“. 25 3

39、GPP TS 34.124: “Electromagnetic Compatibility (EMC) for Mobile terminals and ancillary equipment“. 26 3GPP TS 51.010-1: “Mobile Station (MS) conformance specification; Part 1: Conformance specification “. 27 3GPP TS 51.010-2: “Mobile Station (MS) conformance specification; Part 2: Protocol Implement

40、ation Conformance Statement (PICS) proforma specification“. 28 3GPP TS 36.101: “E-UTRA UE radio transmission and reception“. 29 3GPP TS 36.508: “Common test environments for User Equipment (UE)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following

41、terms and definitions apply: - terms defined in the relevant 3GPP core specifications (see normative references); - terms defined in ISO/IEC 9646-1 1 and in ISO/IEC 9646-7 2. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)73GPP TS 34.121-2 version 12.5.0 Release 12In particular, the following terms defined

42、 in ISO/IEC 9646-1 1 apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented The ICS can take several forms: protocol ICS, profile ICS, profile speci

43、fic ICS, information object ICS, etc. ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ICS Implementation Conformance Statement SC

44、S System Conformance Statement UEUT User Equipment Under Test 4 Recommended test case applicability The applicability of each individual test is identified in the table 1. This applicability can in some circumstances be changed to not recommended when so specified in table 2. This is just a recommen

45、dation based on the purpose for which the test case was written. The applicability of every test is formally expressed by the use of Boolean expression that are based on parameters (ICS) included in annex A of the present document. The columns in tables 1 and 2 have the following meaning: Clause The

46、 clause column indicates the clause number in TS 34.121-1 20 that contains the test body. Title The title column describes the name of the test. Release The release column indicates the earliest release from which each test case is applicable, except if otherwise stated of an individual test case. A

47、pplicability The following notations are used for the applicability column: R recommended - the test case is recommended O optional the test case is optional N/A not applicable - in the given context, the test case is not recommended. Ci conditional - the test is recommended (“R“) or not (“N/A“) dep

48、ending on the support of other items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ is used to avoid ambiguities. Comments This column conta

49、ins a verbal description of the condition included in the applicability column. ETSI ETSI TS 134 121-2 V12.5.0 (2017-02)83GPP TS 34.121-2 version 12.5.0 Release 12Table 1: Applicability of tests Clause Title Release Applica-bility Release Applicability Comments RF Test cases 5.2 Maximum Output Power R99 R RA99 UEs supporting FDD 5.2A Maximum Output Power with HS-DPCCH Rel-5 only C_RF02 RF_RO_04 UEs supporting FDD and HS-PDSCH 5.2AA Maximum Output Power with HS-DPCCH (Release 6 and later) Rel