ETSI TS 134 109-2016 Universal Mobile Telecommunications System (UMTS) Terminal logical test interface Special conformance testing functions (V13 0 0 3GPP TS 34 109 version 13 0 0 .pdf

《ETSI TS 134 109-2016 Universal Mobile Telecommunications System (UMTS) Terminal logical test interface Special conformance testing functions (V13 0 0 3GPP TS 34 109 version 13 0 0 .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 134 109-2016 Universal Mobile Telecommunications System (UMTS) Terminal logical test interface Special conformance testing functions (V13 0 0 3GPP TS 34 109 version 13 0 0 .pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelTerminaSpecial conf(3GPP TS 34.1TECHNICAL SPECIFICATION134 109 V13.0.0 (2016elecommunications System (nal logical test interface; nformance testing functions .109 version 13.0.0 Release 1316-01) (UMTS); 13) ETSI ETSI TS 134 109 V13.0.0 (2016-01)13GPP TS 34.109 version 1

2、3.0.0 Release 13Reference RTS/TSGR-0234109vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Imp

3、ortant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior writte

4、n authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document

5、should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following

6、 services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF versi

7、on shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registe

8、red for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 134 109 V13.0.0 (2016-01)23GPP TS 34.109 versio

9、n 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “In

10、tellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, in

11、cluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS)

12、 has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cros

13、s reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as describ

14、ed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 109 V13.0.0 (2016-01)33GPP TS 34.109 version 13.0.0 Release 13Contents Intellectual Property R

15、ights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 UE conformance test functions 7g34.1 General description. 7g34.2 UE radio bearer test mode 8g34.3 UE test loop 9g34.4 EMMI . 9g3

16、5 Test Control (TC) protocol procedures and test loop operation . 9 g35.1 General description. 9g35.2 UE radio bearer test mode procedures 13g35.2.1 Activate UE radio bearer test mode 13g35.2.1.1 General 14g35.2.1.2 Initiation 14g35.2.1.3 Reception of ACTIVATE RB TEST MODE message by UE 14g35.2.1.4

17、Reception of ACTIVATE RB TEST MODE COMPLETE message by SS . 14g35.2.1.5 TT01 timeout. 14g35.2.2 Deactivate UE radio bearer test mode. 15g35.2.2.1 General 15g35.2.2.2 Initiation 15g35.2.2.3 Reception of DEACTIVATE RB TEST MODE message by UE . 15g35.2.2.4 Reception of DEACTIVATE RB TEST MODE COMPLETE

18、message by SS 15g35.2.2.5 TT01 timeout. 15g35.3 UE test loop procedures . 15g35.3.1 General 15g35.3.2 Close UE test loop 16g35.3.2.1 General 16g35.3.2.2 Initiation 16g35.3.2.3 Reception of CLOSE UE TEST LOOP message by the UE . 17g35.3.2.4 Reception of CLOSE UE TEST LOOP COMPLETE message by the SS 1

19、7g35.3.2.5 TT01 timeout. 17g35.3.2.6 UE test loop mode 1 operation 17g35.3.2.6.1 Loopback of PDCP SDUs . 17g35.3.2.6.2 Loopback of RLC SDUs 18g35.3.2.7 UE test loop mode 2 operation 19g35.3.2.7.1 Loopback of downlink transport block data and downlink CRC . 20g35.3.2.8 Void. 21g35.3.2.8a UE Test Loop

20、 Mode 3 Operation 21g35.3.2.8b UE test loop mode 4 operation 21g35.3.2.8b.1 Loopback of IP PDUs 22g35.3.2.9 Loopback delay requirement . 22g35.3.2.9.1 General loopback delay requirement . 22g35.3.2.9.2 Loopback delay requirement for RLC and PDCP SDUs (UE Test loop mode 1) . 24g35.3.3 Open UE test lo

21、op . 24g35.3.3.1 General 25g35.3.3.2 Initiation 25g3ETSI ETSI TS 134 109 V13.0.0 (2016-01)43GPP TS 34.109 version 13.0.0 Release 135.3.3.3 Reception of OPEN UE TEST LOOP message by the UE . 25g35.3.3.4 Reception of OPEN UE TEST LOOP COMPLETE by the SS. 25g35.3.3.5 TT01 timeout. 25g35.4 UE Positionin

22、g test mode procedures . 25g35.4.1 Reset UE Positioning Stored Information . 25g35.4.1.1 General 25g35.4.1.2 Initiation 25g35.4.1.3 Reception of RESET UE POSITIONING STORED INFORMATION message by UE 25g35.4.2 Update UE Location Information . 26g35.4.2.1 General 26g35.4.2.2 Initiation 26g35.4.2.3 Rec

23、eption of UPDATE UE LOCATION INFORMATION message by UE . 26g35.5 UE RLC SDU counter reporting procedure 27g35.5.1 UE TEST LOOP MODE 3 RLC SDU COUNTER REQUEST and UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE 27g35.5.1.1 General 27g35.5.1.2 Initiation 27g35.5.1.3 Reception of UE TEST LOOP MODE 3 RLC S

24、DU COUNTER REQUEST by the UE . 27g35.5.1.4 Reception of UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE by the SS 27g35.5.1.5 TT01 timeout. 27g36 Message definitions and contents . 27g36.1 Timer values . 28g36.2 CLOSE UE TEST LOOP . 28g36.3 CLOSE UE TEST LOOP COMPLETE . 30g36.4 OPEN UE TEST LOOP . 30g3

25、6.5 OPEN UE TEST LOOP COMPLETE . 30g36.6 ACTIVATE RB TEST MODE 31g36.7 ACTIVATE RB TEST MODE COMPLETE 31g36.8 DEACTIVATE RB TEST MODE . 31g36.9 DEACTIVATE RB TEST MODE COMPLETE . 32g36.10 RESET UE POSITIONING STORED INFORMATION 32g36.11 UE TEST LOOP MODE 3 RLC SDU COUNTER REQUEST . 32g36.12 UE TEST

26、LOOP MODE 3 RLC SDU COUNTER RESPONSE . 33g36.13 UPDATE UE LOCATION INFORMATION 33g37 Electrical Man Machine Interface (EMMI) 34g38 UICC/ME test interface 35g38.1 General description. 35g38.2 Formal aspects 35g38.3 Hardware and logical aspects of the interface 35g38.4 Mechanical characteristics of th

27、e interface. 35g3Annex A (informative): UE test loop use scenarios . 36g3A.1 Measurement of receiver characteristics (BER) using UE test loop mode 1 and RLC TM . 36g3A.1.1 Measurement of receiver characteristics (BER) - DL reference measurement channel (12.2 kbps). 36g3A.2 Measurement of receiver pe

28、rformance (BLER) using UE test loop mode 1 and RLC AM . 36g3A.2.1 Measurement of receiver performance (BLER) - DL reference measurement channel (64,144,384 kbps) . 37g3A.3 Measurement of receiver performance (BLER) using UE test loop mode 2 37g3A.3.1 Measurement of receiver performance (BLER) - DL r

29、eference measurement channel (12.2 kbps) . 38g3A.3.2 Measurement of receiver performance (BLER) - DL reference measurement channel (64,144 and 384 kbps) 38g3A.4 Measurement of transmitter characteristics 38g3A.5 Measurement of transmitter DTX characteristics . 39g3A.6 Using UE test loop mode 2 for t

30、esting of UE Blind Transport Format Detection (FDD mode) 39g3A.7 Using UE test loop mode 1 for protocol testing . 40g3Annex B (informative): Change history . 42g3History 43g3ETSI ETSI TS 134 109 V13.0.0 (2016-01)53GPP TS 34.109 version 13.0.0 Release 13Foreword This Technical Specification has been

31、produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying

32、 change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of s

33、ubstance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 134 109 V13.0.0 (2016-01)63GPP TS 34.109 version 13.0.0 Release 131 Scope The present document specifies for User Equipm

34、ent (UE), in UMTS system, for FDD and TDD modes, those UE functions that are required for conformance testing purposes. For conformance tests, functions are activated via the radio interface. These functions shall be capable of being activated when a test USIM is present. Any USIM related features s

35、uch as subsidy-related UE features should also not interfere with the functions. In the loopback state, the UE shall be able to perform all functions specified in the present document except where otherwise stated; in addition however, the conformance testing functions must be operational. USIM, in

36、general, is described in TS 31.101 7. The ME recognises the test USIM by the Administrative Data Field. Test USIM data fields are described in TS 34.108 10. The present document applies to the unit that includes the hardware to establish a connection across the radio interface. 2 References The foll

37、owing documents contain provisions that, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not appl

38、y. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 24.007: “Mobile radio interf

39、ace signalling layer 3; General aspects“. 2 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols; Stage 3“. 3 3GPP TS 25.101: “UE Radio transmission and reception (FDD)“. 4 3GPP TS 25.102: “UTRA (UE) TDD; Radio transmission and reception“. 5 3GPP TS 25.331: “Radio Re

40、source Control (RRC); protocol specification“. 6 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 7 3GPP TS 31.101: “UICC-Terminal Interface; Physical and Logical Characteristics“. 8 3GPP TS 34.121: “Terminal Conformance Specification; Radio Transmission and Reception (FDD)“. 9 3GPP TS 34.122:

41、“Terminal Conformance Specification; Radio Transmission and Reception (TDD)“. 10 3GPP TS 34.108: “Common Test Environments for User Equipment (UE) Conformance Testing“. 11 3GPP TS 25.211: “Physical channels and mapping of transport channels onto physical channels (FDD)“. 12 3GPP TS 25.133: “Requirem

42、ents for support of Radio Resource Management (FDD)“. 13 3GPP TS 44.014: “Individual equipment type requirements and interworking; Special conformance testing functions“. 14 3GPP TS 27.005: “Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Cell Broadcast

43、Service (CBS)“. ETSI ETSI TS 134 109 V13.0.0 (2016-01)73GPP TS 34.109 version 13.0.0 Release 1315 3GPP TS 27.007: “AT command set for User Equipment (UE)“. 16 3GPP TS 27.060: “Mobile Stations (MS) supporting packet switched services“. 17 3GPP TS 34.123-2: “User Equipment (UE) conformance specificati

44、on; Part 2: Implementation Conformance Statement (ICS) proforma specification“. 18 3GPP TS 25.306: “UE Radio Access capabilities“. 19 3GPP TS 25.322: “Radio Link Control (RLC) protocol specification“. 20 3GPP TS 23.060: “General Packet Radio Service (GPRS) Service Description Stage 2“. 3 Definitions

45、 and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: UE (User Equipment): user equipment that is under test. SS (System Simulator): test system (or equipment) that drives the test process between UE, like BS (Base Station) simulator.

46、 User: test user, who handles the test and measurement process via the logical test interface. Logical Test Interface: interface which provides the logical service to interwork and to communicate between UE and System Simulator during the test of a UE. TC (Test Control): UE protocol entity used by t

47、he SS to control the UE specific testing functions. 3.2 Abbreviations Abbreviations used in the present document are listed in TR 21.905 6. For the purposes of the present document, the following abbreviations apply: IP Internet Protocol LB Loop BackRAB Radio Access Bearer RB Radio Bearer SAPI Servi

48、ce Access Point Indicator SS System Simulator TC Test Control TFT Traffic Flow Template UICC UMTS Integrated Circuit Card UL TFT Uplink Traffic Flow Template 4 UE conformance test functions 4.1 General description The SS performs activation and deactivation of the conformance test functions in the U

49、E by sending standard NAS Layer 3 messages. A specific protocol discriminator value has been defined in TS 24.007 1, subclause 11.2.3.1.1 for the UE test command messages. Figure 4.1.1 illustrates the Layer 3 protocol entity Test Control (TC) where the UE test command messages terminates. ETSI ETSI TS 134 109 V13.0.0 (2016-01)83GPP TS 34.109 version 13.0.0 Release 13NOTE: The protocol discriminator value used for the TC messages is the same as used in GSM for the MS specific testing functions, see TS 44.014 13. UEPHYPHYS