ETSI TS 134 108-2016 Universal Mobile Telecommunications System (UMTS) LTE Common test environments for User Equipment (UE) Conformance testing (V12 3 0 3GPP TS 34 108 version 12 3.pdf

《ETSI TS 134 108-2016 Universal Mobile Telecommunications System (UMTS) LTE Common test environments for User Equipment (UE) Conformance testing (V12 3 0 3GPP TS 34 108 version 12 3.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 134 108-2016 Universal Mobile Telecommunications System (UMTS) LTE Common test environments for User Equipment (UE) Conformance testing (V12 3 0 3GPP TS 34 108 version 12 3.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 13Universal Mobile TelCommon test enviroCon(3GPP TS 34.10TECHNICAL SPECIFICATION134 108 V11.15.0 (201elecommunications System (LTE; ironments for User Equipmeno formance testing .108 version 11.15.0 Release 1016-01) (UMTS); ent (UE); 11) ETSI ETSI TS 134 108 V11.15.0 (2016-01)13GPP TS 34.10

2、8 version 11.15.0 Release 11Reference RTS/TSGR-0534108vbf0 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one

6、of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content

7、of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks

8、 of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 134 108 V11.15.0 (2016-01)23GPP

9、 TS 34.108 version 11.15.0 Release 11Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ET

10、SI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no

11、investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical S

12、pecification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI de

13、liverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be in

14、terpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 108 V11.15.0 (2016-01)33GPP TS 34.108 version 11.15.0 Release 11Content In

15、tellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions, abbreviations and symbols . 5g34 Common requirements of test equipment. 5g35 to 11 Void 5g3Annex A to C (informative): Void . 6g3A

16、nnex D (informative): Change history . 7g3History 29g3ETSI ETSI TS 134 108 V11.15.0 (2016-01)43GPP TS 34.108 version 11.15.0 Release 11Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifica

17、tions or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal v

18、erbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT

19、allowed in ETSI deliverables except when used in direct citation. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an ide

20、ntifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all chan

21、ges of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The definition of the Conformance Tests for UE in 3G will be a complex task as the complete test suite covers RF

22、, EMC and Protocol aspects of the UE. Each test requires a Test Environment to be defined in which the UE has to operate to defined standards, constraints and performance. The overall task can be simplified if there are a number of well defined and agreed Common Test Environments where every one can

23、 be used for a number of tests. Hence the present document defines testing conditions that are common to several tests avoiding the need to duplicate the same information for every single test. The present document defines default values for a variety of common areas. Where values are not specified

24、in test cases, the defaults in the present document will apply. If specified, the test case values will take precedence. The present document addresses the FDD mode as well as the TDD mode. ETSI ETSI TS 134 108 V11.15.0 (2016-01)53GPP TS 34.108 version 11.15.0 Release 111 Scope The present document

25、contains definitions of reference conditions and test signals, default parameters, reference radio bearer configurations used in radio bearer interoperability testing, common radio bearer configurations for other test purposes, common requirements for test equipment and generic set-up procedures for

26、 use in UE conformance tests. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a

27、specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the pres

28、ent document. 1 to 48 (void) 49 3GPP TS 34.108 Release 12: “Common test environments for User Equipment (UE); Conformance testing“ 3 Definitions, abbreviations and symbols Void 4 Common requirements of test equipment The requirements of the present document are provided in 3GPP TS 34.108 Release 12

29、49. 5 to 11 Void ETSI ETSI TS 134 108 V11.15.0 (2016-01)63GPP TS 34.108 version 11.15.0 Release 11Annex A to C (informative): Void ETSI ETSI TS 134 108 V11.15.0 (2016-01)73GPP TS 34.108 version 11.15.0 Release 11Annex D (informative): Change history Meeting-1st-Level Doc-1st-Level CR Rev Subject Cat

30、 Version-Current Version-New Doc-2nd-Level TP-08 Approval of the specification 2.0.0 3.0.0 TP-09 TP-000131 001 RRC Message Contents: RLCSize C 3.0.1 3.1.0 T1-000190 TP-09 TP-000131 002 RRC Message Contents: RLCParam C 3.0.1 3.1.0 T1-000191 TP-09 TP-000131 003 RRC Message Contents: PCPreamble C 3.0.1

31、 3.1.0 T1-000192 TP-09 TP-000131 004 RRC Message Contents: RBIdentity C 3.0.1 3.1.0 T1-000193 TP-09 TP-000131 005 RRC Message Contents: TrCHParam C 3.0.1 3.1.0 T1-000194 TP-09 TP-000131 006 RRC Message Contents: UECapability C 3.0.1 3.1.0 T1-000195 TP-09 TP-000131 007 RRC Message Contents: RBMapping

32、 C 3.0.1 3.1.0 T1-000196 TP-09 TP-000131 008 RRC Message Contents: PagingCause C 3.0.1 3.1.0 T1-000197 TP-09 TP-000131 009 RRC Message Contents: CipheringAndIntegrity C 3.0.1 3.1.0 T1-000198 TP-09 TP-000131 010 RRC Message Contents: RLCInfo C 3.0.1 3.1.0 T1-000199 TP-09 TP-000131 011 RRC Message Con

33、tents: CompressedMode C 3.0.1 3.1.0 T1-000200 TP-09 TP-000131 012 RRC Message Contents: SIB C 3.0.1 3.1.0 T1-000201 TP-09 TP-000131 013 RRC Message Contents: PhyCH D 3.0.1 3.1.0 T1-000202 TP-09 TP-000131 014 RRC Message Contents: Measurement C 3.0.1 3.1.0 T1-000203 TP-09 TP-000131 015 RRC Message Co

34、ntents: TFCS C 3.0.1 3.1.0 T1-000204 TP-09 TP-000131 016 RRC Message Contents: DPCHFrameOffset C 3.0.1 3.1.0 T1-000205 TP-09 TP-000131 017 Test USIM Parameters F 3.0.1 3.1.0 T1-000215 TP-09 TP-000131 018 Correction to definition of the test algorithm for authentication (clause 8.1.2) F 3.0.1 3.1.0 T

35、1-000164 TP-09 TP-000131 019 Reference Radio Bearer Configurations F 3.0.1 3.1.0 T1-000212 TP-09 TP-000131 020 TDD Single mode F 3.0.1 3.1.0 T1-000220 TP-10 TP-000215 021 Common generic procedure for AS testing B 3.1.0 3.2.0 T1-000294 TP-10 TP-000215 022 Requirements for the system simulator for sup

36、port of Tcell parameter F 3.1.0 3.2.0 T1-000303 TP-10 TP-000215 023 Minimum Performance Levels F 3.1.0 3.2.0 T1-000306 TP-10 TP-000215 024 Downlink signal conditions and propagation conditions D 3.1.0 3.2.0 T1-000307 TP-10 TP-000215 025 Updating 34.108 v3.1.0 to TDD single mode F 3.1.0 3.2.0 T1-0002

37、81 TP-10 TP-000215 026 Application of integrity mode protection to signalling message by default F 3.1.0 3.2.0 T1-000296 TP-10 TP-000215 027 Updates to the default message contents in clause 9 C 3.1.0 3.2.0 T1-000282 TP-10 TP-000215 028 Updates to System Information Block (SIB) and Master Informatio

38、n Block (MIB) messages C 3.1.0 3.2.0 T1-000283 TP-10 TP-000215 029 Application of ciphering during conformance testing C 3.1.0 3.2.0 T1-000285 TP-10 TP-000215 030 Addition for System Information parameters (34.108 clause 6.1) F 3.1.0 3.2.0 T1-000304 TP-10 TP-000215 031 Correction for Generic Setup P

39、rocedures (34.108 clause 7.2) F 3.1.0 3.2.0 T1-000305 TP-11 TP-010018 032 Default radio conditions for multi-cell environment F 3.2.0 3.3.0 T1-010078 TP-11 TP-010018 033 Correction for Generic Setup Procedures (34.108 clause 7.2) F 3.2.0 3.3.0 T1-010079 TP-11 TP-010018 034 Corrections for Test USIM

40、Parameters(34.108 clause 8) F 3.2.0 3.3.0 T1-010080 TP-11 TP-010018 035 Correction of clause number in TS 34.108. D 3.2.0 3.3.0 T1-010081 TP-11 TP-010018 036 Update of authentication test algorithm C 3.2.0 3.3.0 T1-010082 TP-11 TP-010018 037 Updates to clause 9 of TS 34.108 v3.2.0 F 3.2.0 3.3.0 T1-0

41、10084 TP-11 TP-010018 038 Updating to TDD single mode F 3.2.0 3.3.0 T1-010088 TP-11 TP-010018 039 Simulated network environments for TDD mode (SIB) F 3.2.0 3.3.0 T1-010089 TP-12 TP-010118 040 Corrections to clause 6.10 FDD parameters F 3.3.0 3.4.0 T1-010205 TP-12 TP-010118 041 Corrections to clause

42、6.10 TDD parameters F 3.3.0 3.4.0 T1-010206 TP-12 TP-010118 042 Adding section for radio bearer configurations intended for functional testing D 3.3.0 3.4.0 T1-010210 TP-12 TP-010118 043 Update of list of abbreviations D 3.3.0 3.4.0 T1-010211 TP-12 TP-010118 044 Updates to clause 6.1 and 9 F 3.3.0 3

43、.4.0 T1-010212 TP-12 TP-010118 045 Updates to clause 7.4 F 3.3.0 3.4.0 T1-010213 TP-12 TP-010118 046 clause 6.1: System Information Blocks for TDD Mode F 3.3.0 3.4.0 T1-010214 TP-12 TP-010118 047 Editorial corrections and removal of a reference document F 3.3.0 3.4.0 T1-010215 TP-13 TP-010215 048 Co

44、rrection to reference F 3.4.0 3.5.0 T1-010275 TP-13 TP-010215 049 Editorial modification for References F 3.4.0 3.5.0 T1-010276 TP-13 TP-010215 050 Some corrections in clause 5 F 3.4.0 3.5.0 T1-010277 TP-13 TP-010215 051 Update to Scope Statement F 3.4.0 3.5.0 T1-010278 TP-13 TP-010215 052 Clause 6.

45、10 Definition of RB configurations, TDD parameters F 3.4.0 3.5.0 T1-010279 TP-13 TP-010215 053 Updates to clause 6.1, clause 7.4 and clause 9 F 3.4.0 3.5.0 T1-010280 ETSI ETSI TS 134 108 V11.15.0 (2016-01)83GPP TS 34.108 version 11.15.0 Release 11Meeting-1st-Level Doc-1st-Level CR Rev Subject Cat Ve

46、rsion-Current Version-New Doc-2nd-Level TP-13 TP-010215 054 Clause 6.1: Default radio conditions for Signalling tests F 3.4.0 3.5.0 T1-010281 TP-13 TP-010215 055 Correction of Radio Bearer Configurations for FDD Mode F 3.4.0 3.5.0 T1-010282 TP-13 TP-010215 056 Correction of Radio Bearer Configuratio

47、ns for TDD Mode F 3.4.0 3.5.0 T1-010283 TP-13 TP-010215 057 Changes to Signalling Radio Bearer (SRB) numbering F 3.4.0 3.5.0 T1-010284 TP-13 TP-010215 058 Missing bearers in tables 6.10.2.1.1 and 6.10.3.1.1 F 3.4.0 3.5.0 T1-010285 TP-13 TP-010215 059 Correction of system information block 5 F 3.4.0

48、3.5.0 T1-010286 TP-13 TP-010215 060 Introducing of 1.28 Mcps TDD Mode in clauses 4, 5 and 6 F 3.4.0 4.0.0 T1-010287 TP-13 TP-010215 061 Introduction of System Information Blocks for 1.28 Mcps TDD Mode F 3.4.0 4.0.0 T1-010288 TP-13 TP-010215 062 Introduction of typical radio parameters for 1.28 McpsT

49、DD F 3.4.0 4.0.0 T1-010289 TP-13 TP-010215 063 Clause 6.11 RBs for RLC and PDCP testing F 3.4.0 3.5.0 T1-010290 TP-14 TP-010285 065 1 Correction to 6.1 Contents of System Information Blocks A 4.0.0 4.1.0 T1-010475 TP-14 TP-010285 067 1 Corrections to clause 6.1, 7.4 and 9 A 4.0.0 4.1.0 T1-010473 TP-14 TP-010258 069 Reference Radio Conditions A 4.0.0 4.1.0 T1-010461 TP-14 TP-010258 071 Modification of Test procedures for RF tests A 4.0.0 4.1.0 T1-010463 TP-14 TP-010258 073 Default message contents for RF tests A 4.0.0 4.1.0 T1-010465 TP-14 TP-010258 075 Correct