ETSI TS 132 501-2016 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Self-configuration of network elements Concepts and requirements (V13 0 0 3G.pdf

《ETSI TS 132 501-2016 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Self-configuration of network elements Concepts and requirements (V13 0 0 3G.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 132 501-2016 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Self-configuration of network elements Concepts and requirements (V13 0 0 3G.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelTelecommSelf-configurConcep(3GPP TS 32.5TECHNICAL SPECIFICATION132 501 V13.0.0 (2016elecommunications System (LTE; munication management; uration of network elements;cepts and requirements .501 version 13.0.0 Release 1316-02) (UMTS); s; 13) ETSI ETSI TS 132 501 V13.0.0

2、(2016-02)13GPP TS 32.501 version 13.0.0 Release 13Reference RTS/TSGS-0532501vd00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-

3、Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall no

4、t be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secre

5、tariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please sen

6、d your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission

7、 of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETS

8、I logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 501 V

9、13.0.0 (2016-02)23GPP TS 32.501 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, an

10、d can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

11、 ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fore

12、word This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the cor

13、responding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “ca

14、nnot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 501 V13.0.0 (2016-02)33GPP TS 32.501 version 13.0.0 Rele

15、ase 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Concepts and background 7g34.1 Self-Configuration Concept 7g34.1.1 Logical

16、 Function Blocs . 7g34.1.1.1 Address Allocation Function (AAF): 7g34.1.1.2 OAM Connectivity Establishment Function (OAM CO_EF): 7g34.1.1.3 Software Management Function (SW_MF): . 7g34.1.1.4 Inventory Update Function (Inv_UF): 7g34.1.1.5 Self-Test Function (ST_F): . 8g34.1.1.6 Self-Configuration Moni

17、toring and Management Function (SC_MMF): . 8g34.1.1.6.1 Self-Configuration Monitoring and Management Function (SC_MMF_NM): . 8g34.1.1.6.2 Self-Configuration Monitoring and Management Function (SC_MMF_EM): . 8g34.1.1.7 Call Processing Link (CPL) Set Up Function (CPL_SUF): 8g34.1.1.8 Radio Network Con

18、figuration Data Function (R_CD_F): 8g34.1.1.9 Transport Network Configuration Data Function (T_CD_F): 8g34.1.1.10 NRM IRP Update Function (NRM_UF): 8g34.1.1.11 Radio Network and Transport Network Configuration Data Preparation Function 8g34.2 Automatic Radio Configuration Data handling Function (ARC

19、F) Concept . 8 g34.2.1 Definitions 8g34.3 Multi-Vendor Plug and Play eNB connection to network Concept 9g34.3.1 General description . 9g34.3.2 Network Scenarios 9g34.3.2.1 eNB connected via a Non-Secure, Operator Controlled Network . 9 g34.3.2.2 eNB connected via an External Network 10g34.3.2.3 eNB

20、connection to the OAM Network and multiple CNs via separate SeGWs 10g34.3.3 Security Aspects . 11g34.3.3.1 Root Certificate Acquisition: 11g34.3.3.2 Number of CA servers 12g34.3.3.3 Number of OAM SeGWs 12g35 Business Level Requirements 13g35.1 Self- Configuration of eNodeB“s . 13g35.1.1 Actor roles

21、13g35.1.2 Telecommunications resources . 13g35.1.3 High-level use cases 13g35.2 Business Requirements for Multi Vendor Plug and Play eNB connection to network 13g36 Specification level requirements 15g36.1 General . 15g36.2 Actor roles 15g36.3 Telecommunications resources 15g36.4 Use cases 15g36.4.1

22、 Use case for Automatic Radio Network Configuration Data Handling 15g36.4.1.1 Use case radio network configuration data request, transfer and validity check . 15g3ETSI ETSI TS 132 501 V13.0.0 (2016-02)43GPP TS 32.501 version 13.0.0 Release 136.4.2 Use case Self-configuration of a new eNodeB . 15g36.

23、4.3 Use case Multi Vendor Plug and Connect eNB to network 18g36.5 Requirements 19g36.5.1 Automatic Radio Network Configuration Data Handling . 19g36.5.2 Self-configuration of a new eNodeB 19g36.5.2.1 Self-Configuration Management and Monitoring . 20g36.5.2.1.1 Management Part . 20g36.5.2.1.2 Monitor

24、ing Part . 20g36.5.2.2 Software Management . 20g36.5.2.3 Address Allocation and OAM Connectivity Establishment 21g36.5.2.4 Inventory Update . 21g36.5.2.5 Self-Test 21g36.5.2.6 Radio Configuration Data . 21g36.5.2.7 Transport Configuration Data . 21g36.5.2.8 Call Processing Link Set-Up . 21g36.5.2.9

25、NRM IRP Update 21g36.5.3 Specification Requirements for Multi-Vendor Plug and Play eNB connection to network 21g37. Functions and Architecture 22g37.1 Self-Configuration Logical Architecture 22g37.2 Self-Configuration Reference Model . 23g3Annex A (informative): Graphical representation of the PnC U

26、se Case . 24g3Annex B (informative): Change history . 27g3History 28g3ETSI ETSI TS 132 501 V13.0.0 (2016-02)53GPP TS 32.501 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subje

27、ct to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first d

28、igit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when

29、editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project Technical Specification Group Services and System Aspects, Telecommunication management; as identified below: 32.501: Self-Configurat

30、ion of Network Elements; Concepts and Integration Reference Point (IRP) Requirements 32.502: Self-Configuration of Network Elements Integration Reference Point (IRP); Information Service (IS) 32.506: Self-Configuration of Network Elements Integration Reference Point (IRP); Solution Set (SS) definiti

31、ons ETSI ETSI TS 132 501 V13.0.0 (2016-02)63GPP TS 32.501 version 13.0.0 Release 131 Scope The present document describes the concepts how self-configuration works and what IRP requirements need to be met to support this functionality. The document also captures if a requirement shall be met via the

32、 Itf-N interface or via other protocols. This version of the TS is restricted to self-configuration of eNBs. The requirements in this document are not imposed on HNBs. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present

33、document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (in

34、cluding a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3

35、3GPP TS 32.102: “Telecommunication management; Architecture“. 4 3GPP TR 32.816: “Telecommunication management; Study on Management of Evolved Universal Terrestrial Radio Access Network (E-UTRAN) and Evolved Packet Core (EPC)“. 5 3GPP TS 32.531: “Telecommunication management; Architecture; Software M

36、anagement Concepts and IRP Requirements “. 6 ITU-T Recommendation X.800: “Security architecture for Open Systems Interconnection for CCITT applications“. 7 3GPP TS 33.310: “ Network Domain Security (NDS); Authentication Framework (AF)“. 3 Definitions and abbreviations For the purposes of the present

37、 document, the terms and definitions given in TS 32.101 2, TS 32.102 3 and TS 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TS 32.101 1, TS 32.102 2 and TS 21.905 5, in that order. 3.1 Definitions For the pu

38、rposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Credentials: Data that is transferred to establish the claimed identity of an

39、entity, see ITU-T Recommendation X.800 6. Plug and Play: The process of connecting a minimally preconfigured node to the transport network, whereby the node, with minimum operator attention, can exchange information with the OAM system and other relevant nodes to an extent that the node is configure

40、d and ready to handle traffic. ETSI ETSI TS 132 501 V13.0.0 (2016-02)73GPP TS 32.501 version 13.0.0 Release 13Plug and Connect: The procedure by which an eNodeB gets basic connectivity information after it is powered up and gets connected to its EM system in a multi-vendor environment. Multi-vendor

41、Plug and Connect is part of the Multi-Vendor Plug and Play. Self Configuration: The process which brings a network element into service requiring minimal human operator intervention or none at all. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and

42、 the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CA Certification Authority CMP Certificate Management Protocol DHCP Dynamic Host Configuration Protocol DNS Doman Name System EM Element Manage

43、rFQDN Fully Qualified Domain Name IP IP address MvPnC Multi-vendor Plug and Connect MvPnP Multi-vendor Plug and Play NAT Network Address Translation PnC Plug and Connect PnP Plug and Play RA Registration Authority SC Self Configuration SeGW Security Gateway TLS Transport Layer Security VLAN Virtual

44、LAN VM Vendor Mediator4 Concepts and background Provide here an update of See TS 32.816 4 5.1.3.1.1 Establishment of new eNodeB in network 4.1 Self-Configuration Concept 4.1.1 Logical Function Blocs 4.1.1.1 Address Allocation Function (AAF): This functional bloc supports the following functions: SC1

45、, SC3. 4.1.1.2 OAM Connectivity Establishment Function (OAM CO_EF): This functional bloc supports the following functions: SC2, SC3, SC4, SC5, SC13. 4.1.1.3 Software Management Function (SW_MF): This functional bloc supports the following functions: SC3, SC6, SC7, SC8, SC20, SC21. 4.1.1.4 Inventory

46、Update Function (Inv_UF): This functional bloc supports the following functions: SC16. ETSI ETSI TS 132 501 V13.0.0 (2016-02)83GPP TS 32.501 version 13.0.0 Release 134.1.1.5 Self-Test Function (ST_F): This functional bloc supports the following functions: SC17. This function performs eNodeB self-tes

47、ts. 4.1.1.6 Self-Configuration Monitoring and Management Function (SC_MMF): This functional bloc supports the following functions: SC18. This function monitors the self-configuration process and provides the operator with this information. This function must be able to get information about all othe

48、r functional blocs. In addition to this it allows the operator to control the execution of the self-configuration process. 4.1.1.6.1 Self-Configuration Monitoring and Management Function (SC_MMF_NM): SC_MMF_NM (IRP Manager): representing the NM portion of SC_MMF (necessary monitoring and limited int

49、eraction capabilities to support an automated optimization), as well as related IRPManager functionality 4.1.1.6.2 Self-Configuration Monitoring and Management Function (SC_MMF_EM): SC_MMF_EM (IRP Agent): representing the portion of SC_MMF operating below Itf-N, as well as related IRPAgent functionality 4.1.1.7 Call Processing Link (CPL) Set Up Function (CPL_SUF): This functional bloc supports the following functions: SC14, SC15. 4.1.1.8 Radio Network Configuration Data Function (R_CD_F): This