ETSI TS 129 344-2017 Universal Mobile Telecommunications System (UMTS) LTE Proximity-services (ProSe) function to Home Subscriber Server (HSS) aspects Stage 3 (V14 3 0 3GPP TS 29 3.pdf

《ETSI TS 129 344-2017 Universal Mobile Telecommunications System (UMTS) LTE Proximity-services (ProSe) function to Home Subscriber Server (HSS) aspects Stage 3 (V14 3 0 3GPP TS 29 3.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 129 344-2017 Universal Mobile Telecommunications System (UMTS) LTE Proximity-services (ProSe) function to Home Subscriber Server (HSS) aspects Stage 3 (V14 3 0 3GPP TS 29 3.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelProximfunction to Home S(3GPP TS 29.3TECHNICAL SPECIFICATION129 344 V13.2.0 (2017elecommunications System (LTE; ximity-services (ProSe) e Subscriber Server (HSS) aspStage 3 .344 version 13.2.0 Release 1317-01) (UMTS); spects; 13) ETSI ETSI TS 129 344 V13.2.0 (2017-01)13

2、GPP TS 29.344 version 13.2.0 Release 13Reference RTS/TSGC-0429344vd20 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture d

3、e Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modifi

4、ed without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Use

5、rs of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send

6、 your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission

7、of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI

8、 logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 129 344 V1

9、3.2.0 (2017-01)23GPP TS 29.344 version 13.2.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and

10、 can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

11、ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Forew

12、ord This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corr

13、esponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “can

14、not“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 344 V13.2.0 (2017-01)33GPP TS 29.344 version 13.2.0 Relea

15、se 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 General Description 7g34.1 Introduction 7g35 Procedure Descriptions. 7g35.1 Introd

16、uction 7g35.2 ProSe Subscriber Information Retrieval . 8g35.2.1 General 8g35.2.2 Detailed Behaviour of the ProSe Function . 8g35.2.3 Detailed Behaviour of the HSS . 9g35.3 Update ProSe Subscriber Data . 9g35.3.1 General 9g35.3.2 Detailed behaviour of the ProSe Function 10g35.3.3 Detailed behaviour o

17、f the HSS . 11g35.4 Notification Procedure . 11g35.4.1 General 11g35.4.2 Detailed Behaviour of the ProSe Function . 12g35.4.3 Detailed Behaviour of the HSS . 12g35.5 Reset . 13g35.5.1 General 13g35.5.2 Detailed behaviour of the ProSe Function 13g35.5.3 Detailed behaviour of the HSS . 14g35.6 Initial

18、 Location Information Retrieval 14g35.6.1 General 14g35.6.2 Detailed Behaviour of the ProSe Function . 15g35.6.3 Detailed Behaviour of the HSS . 15g36 Protocol Specification and Implementations 15g36.1 Introduction 15g36.1.1 Use of Diameter Base Protocol . 15g36.1.2 Securing Diameter Messages 16g36.

19、1.3 Accounting Functionality . 16g36.1.4 Use of Sessions . 16g36.1.5 Transport Protocol 16g36.1.6 Routing Considerations . 16g36.1.7 Advertising Application Support 16g36.1.8 Diameter Application Identifier 17g36.1.9 Use of the Supported-Features AVP . 17g36.2 Commands 17g36.2.1 Introduction. 17g36.

20、2.2 Command-Code Values 17g36.2.3 ProSe-Subscriber-Information-Request (PIR) Command . 18g36.2.4 ProSe-Subscriber-Information-Answer (PIA) Command . 18g36.2.5 Update-ProSe-Subscriber-Data-Request (UPR) Command 19g36.2.6 Update-ProSe-Subscriber-Data-Answer (UPA) Command 19g3ETSI ETSI TS 129 344 V13.2

21、.0 (2017-01)43GPP TS 29.344 version 13.2.0 Release 136.2.7 ProSe-Notify-Request (PNR) Command 20g36.2.8 ProSe-Notify-Answer (PNA) Command 20g36.2.9 Reset-Request (RSR) Command . 20g36.2.10 Reset-Answer (RSA) Command . 21g36.2.11 ProSe-Initial-Location-Information-Request (PSR) Command 21g36.2.12 Pro

22、Se-Initial-Location-Information-Answer (PSA) Command 21g36.3 AVPs 22g36.3.1 General 22g36.3.2 ProSe-Subscription-Data 23g36.3.3 ProSe-Permission 23g36.3.4 ProSe-Allowed-PLMN . 24g36.3.5 ProSe-Direct-Allowed 24g36.3.6 UPR-Flags. 25g36.3.7 PNR-Flags. 25g36.3.8 Feature-List AVP for the PC4a application

23、 26g36.3.9 ProSe-Initial-Location-Information 26g36.3.10 MME-Name 27g36.3.11 OC-Supported-Features 27g36.3.12 OC-OLR . 27g36.3.13 Authorized-Discovery-Range . 27g36.3.14 DRMP . 27g36.4 Result-Code AVP and Experimental-Result AVP Values . 27g36.4.1 General 27g36.4.2 Success 27g36.4.3 Permanent Failur

24、es . 27g36.4.3.1 General 27g36.4.3.2 DIAMETER_ERROR_USER_UNKNOWN (5001) 27g36.4.3.3 DIAMETER_ERROR_UNKNOWN_PROSE_SUBSCRIPTION (5610) 27g36.4.3.4 DIAMETER_ERROR_ PROSE_NOT_ALLOWED (5611) 28g36.4.3.5 DIAMETER_ERROR_ UE_LOCATION_UNKNOWN (5612) 28g3Annex A (normative): Diameter overload control mechanis

25、m 29g3A.1 General . 29g3A.2 HSS behaviour 29g3A.3 ProSe Function behaviour 29g3Annex B (Informative): Diameter overload node behaviour 30g3B.1 Message prioritization 30g3Annex C (normative): Diameter message priority mechanism 31g3C.1 General . 31g3C.2 PC4a interface 31g3C.2.1 General 31g3C.2.2 HSS

26、and ProSe Function behaviour 31g3Annex D (informative): Change history . 32g3History 33g3ETSI ETSI TS 129 344 V13.2.0 (2017-01)53GPP TS 29.344 version 13.2.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present

27、 document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z w

28、here: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit i

29、s incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 344 V13.2.0 (2017-01)63GPP TS 29.344 version 13.2.0 Release 131 Scope The present document describes the Diameter-based PC4a interface between the Proximity-based Services (ProSe) Function and the Home

30、 Subscriber Server (HSS) defined for ProSe. This specification defines the Diameter application for PC4a reference point between the ProSe Function and the HSS.The interactions between the ProSe Function and the HSS are specified. The stage 2 description for Proximity-based Services (ProSe) features

31、 in EPS is specified in 3GPP TS 23.303 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-sp

32、ecific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same R

33、elease as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.303: “Proximity based services; Stage 2“. 3 IETF RFC 3588: “Diameter Base Protocol“. 4 3GPP TS 33.210: “3G Security; Network Domain Security; IP Network Layer Security“. 5 IETF RFC 4960: “Stream Cont

34、rol Transmission Protocol“. 6 3GPP TS 29.229: “Cx and Dx interfaces based on the Diameter protocol“. 7 3GPP TS 23.003: “Numbering, addressing and identification“. 8 IETF RFC 5234: “Augmented BNF for Syntax Specifications: ABNF“. 9 3GPP TS 29.228: “IP multimedia (IM) Subsystem Cx and Dx Interfaces; S

35、ignalling flows and Message Elements“. 10 3GPP TS 29.272: “Evolved Packet System; MME and SGSN Related Interfaces Based on Diameter Protocol“. 11 3GPP TS 23.007: “Restoration procedures“. 12 3GPP TS 29.329: “Sh Interface based on the Diameter protocol“. 13 void 14 3GPP TS 29.173: “Location Services

36、(LCS); Diameter-based SLh interface for Control Plane LCS“. 15 IETF RFC 7683: “Diameter Overload Indication Conveyance“. 16 3GPP TS 24.334: “Proximity-services (ProSe) User Equipment (UE) to ProSe function protocol aspects; Stage 3“. 17 3GPP TS 24.333: “Proximity-services (ProSe) Management Objects

37、(MO); Stage 3“. ETSI ETSI TS 129 344 V13.2.0 (2017-01)73GPP TS 29.344 version 13.2.0 Release 1318 3GPP TS 29.061: “Interworking between the Public Land Mobile Network (PLMN) supporting packet based services and Packet Data Networks (PDN)“. 19 3GPP TS 32.251: “Telecommunication management; Charging m

38、anagement; Packet Switched (PS) domain charging“. 20 3GPP TS 32.298: “Charging Management; CDR parameter description“. 21 IETF RFC 7944: “Diameter Routing Message Priority“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions g

39、iven in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbre

40、viation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. DRMP Diameter Routing Message Priority ProSe Proximity-based Services 4 General Description 4.1 Introduction The PC4a reference point between the ProSe Function and the

41、 HSS is defined in the 3GPP TS 23.303 2. This document describes the PC4a interface related procedures, message parameters and protocol specifications. The PC4a interface allows the ProSe Function to retrieve ProSe related subscription data in order to authorise access from the UE for ProSe. 5 Proce

42、dure Descriptions 5.1 Introduction This section describes the Diameter-based PC4a interface related procedures and information elements exchanged between the ProSe Function and the HSS. In the tables that describe the Information Elements transported by each Diameter command, each Information Elemen

43、t is marked as (M) Mandatory, (C) Conditional or (O) Optional in the “Cat.“ column. For the correct handling of the Information Element according to the category type, see the description detailed in section 6 of the 3GPP TS 29.228 9. ETSI ETSI TS 129 344 V13.2.0 (2017-01)83GPP TS 29.344 version 13.

44、2.0 Release 135.2 ProSe Subscriber Information Retrieval 5.2.1 General This procedure shall be used between the ProSe Function and the HSS for authorization of the UE for ProSe. The procedure shall be invoked by the ProSe Function and is used: - to request ProSe related subscription data. This proce

45、dure is mapped to the commands ProSe-Subscriber-Information-Request/Answer (PIR/PIA) in the Diameter application specified in clause 6. Tables 5.2.1-1 and 5.2.1-2 detail the involved information elements. Table 5.2.1-1: ProSe Subscriber Information Retrieval Request Information Element Name Mapping

46、to Diameter AVP Cat. Description IMSI User-Name (See IETF RFC 3588 3) M This information element shall contain the user IMSI, formatted according to 3GPP TS 23.003 7, clause 2.2. Supported Features (See 3GPP TS 29.229 6) Supported-Features O If present, this information element shall contain the lis

47、t of features supported by the origin host. Table 5.2.1-2: ProSe Subscriber Information Retrieval Answer Information Element Name Mapping to Diameter AVP Cat. Description Result (See 6) Result-Code / Experimental-Result M This IE shall contain the result of the operation. The Result-Code AVP shall b

48、e used to indicate success / errors as defined in the Diameter Base Protocol. The Experimental-Result AVP shall be used for PC4a errors. This is a grouped AVP which shall contain the 3GPP Vendor ID in the Vendor-Id AVP, and the error code in the Experimental-Result-Code AVP. The following errors are

49、 applicable: - User Unknown - Unknown ProSe Subscription - ProSe Not Allowed ProSe Subscription Data (See 6.3.2) ProSe-Subscription-Data C This information element shall contain the ProSe Subscription Data that gives the user permission to use ProSe. MSISDN (See 3GPP TS 29.329 12) MSISDN C This information element shall contain the user MSISDN, formatted according to 3GPP TS 29.329 12. It shall be present if available. Visited PLMN Id (See 3GPP TS 29.272 10) Visited-PLMN-Id C This IE shall contain the MCC and