ETSI TS 125 300-2016 Universal Mobile Telecommunications System (UMTS) Umiversal Terrestrial Radio Access Network (UTRAN) General description Stage 2 (V13 1 0 3GPP TS 25 300 versio.pdf

《ETSI TS 125 300-2016 Universal Mobile Telecommunications System (UMTS) Umiversal Terrestrial Radio Access Network (UTRAN) General description Stage 2 (V13 1 0 3GPP TS 25 300 versio.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 300-2016 Universal Mobile Telecommunications System (UMTS) Umiversal Terrestrial Radio Access Network (UTRAN) General description Stage 2 (V13 1 0 3GPP TS 25 300 versio.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelUniversal TerrestriaGe(3GPP TS 25.3TECHNICAL SPECIFICATION125 300 V13.1.0 (2016elecommunications System (rial Radio Access Network (UTeneral description; Stage 2 .300 version 13.1.0 Release 1316-04) (UMTS); UTRAN); 13) ETSI ETSI TS 125 300 V13.1.0 (2016-04)13GPP TS 25.3

2、00 version 13.1.0 Release 13Reference RTS/TSGR-0225300vd10 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N

3、 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the

4、prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the prese

5、nt document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of t

6、he following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of t

7、he PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of

8、ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 300 V13.1.0 (2016-04)23GPP TS 2

9、5.300 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR

10、000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inves

11、tigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specif

12、ication (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverabl

13、es. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interprete

14、d as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 300 V13.1.0 (2016-04)33GPP TS 25.300 version 13.1.0 Release 13Contents Intellectua

15、l Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 6g33.3 Abbreviations . 6g34 Heterogeneous Networks Mobility Enhancements 6g35 Heterogeneous Networks Enhancements . 6g36

16、 DCH Enhancements (FDD only) . 7g36.1 DL overhead optimization 7g36.2 Enhanced rate matching and transport channel multiplexing . 7g36.3 DL frame early termination (DL FET) and UL DPCCH with DL FET ACK 7g36.3.1 DL FET Full mode (Mode 1) 8g36.3.2 DL FET Basic mode (Mode 0) . 8g36.4 Uplink DPDCH dynam

17、ic 10ms transmission . 8g37 Access Control in Connected Mode (CELL_FACH, CELL_PCH and URA_PCH) . 8g38 Access control enhancements . 9g38.1 DSAC and PPAC update for the UE in CELL_DCH state 9g39 Enhanced Broadcast of System Information 9g39.1 Second system information broadcast channel . 9g39.2 Sched

18、uling information overhead reduction . 11g39.3 MIB and Cell Value Tag range extension 11g310 RAN assisted WLAN interworking . 11g310.1 General principles. 11g310.2 Access network selection and traffic steering rules 12g311 Increased minimum number of carriers to monitor 12g312 Extended DRX in Idle m

19、ode 12g313 L2 and L3 Downlink enhancements for UMTS . 13g313.1 Retrievable configurations 13g313.2 URA_PCH with seamless transition. 13g313.3 Optimization from IDLE to CONNECTED state . 13g313.4 Blind HARQ retransmissions for HSDPA . 13g313.5 Enhanced state transition 13g313.6 Improved synchronized

20、RRC procedures . 13g314 Downlink TPC enhancements for UMTS 14g315 NAICS offloading (FDD only) . 14g316 ACDC in Idle Mode . 14g3Annex A (informative): Change history . 15g3History 16 ETSI ETSI TS 125 300 V13.1.0 (2016-04)43GPP TS 25.300 version 13.1.0 Release 13Foreword This Technical Specification h

21、as been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an ide

22、ntifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all chan

23、ges of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 300 V13.1.0 (2016-04)53GPP TS 25.300 version 13.1.0 Release 131 Scope The present document provides an overv

24、iew and overall description of the UTRA radio interface functionalities from Release 12 onwards which are not covered by the Technical Specifications TS 25.308 2 or TS 25.319 3. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of th

25、e present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3

26、GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.308: “UTRA HSDPA: UTRAN Overall Description (Stage 2) “. 3 3GPP

27、 TS 25.319: “Enhanced Uplink: Overall description (Stage 2) “. 4 3GPP TS 24.008: “Mobile radio interface layer 3 specification, Core Network Protocols - Stage 3“. 5 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description; Stage 2“. 6 3GPP TS 23.682: “Architecture enhancements to fa

28、cilitate communications with packet data networks and applications“. 7 3GPP TR 25.704: “Study on enhanced broadcast of system information“. 8 3GPP TS 24.312: “Access Network Discovery and Selection Function (ANDSF) Management Object (MO)“. 9 3GPP TS 25.304: “User Equipment (UE) procedures in idle mo

29、de and procedures for cell reselection in connected mode“. 10 3GPP TS 23.402: “Architecture enhancements for non-3GPP accesses“. 11 3GPP TS 25.133: “Requirements for support of radio resource management (FDD)“. 12 3GPP TS 25.331: “Radio Resource Control (RRC). 3 Definitions, symbols and abbreviation

30、s 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Power saving mode: Mode configured and controlled

31、by NAS that allows the UE to reduce its power consumption, as defined in TS 24.008 4, TS 23.060 5, TS 23.682 6. ETSI ETSI TS 125 300 V13.1.0 (2016-04)63GPP TS 25.300 version 13.1.0 Release 133.2 Symbols For the purposes of the present document, the following symbols apply: 3.3 Abbreviations For the

32、purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. ACDC Application specific Congestion control for Data Communication

33、 ANDSF Access Network Discovery and Selection Function DPCCH2 Dedicated Physical Control Channel 2 NCL Neighbour Cell List OPI Offload Preference Indicator PSM Power Saving Mode WLAN Wireless Local Area Network 4 Heterogeneous Networks Mobility Enhancements Neighbour Cell List (NCL) extension - The

34、size of the inter-frequency neighbour cell list is extended for CELL_DCH, CELL_FACH, CELL_PCH, URA_PCH states and Idle mode, so that network could configure more inter-frequency neighbour cells than 32 for UE to monitor and detect under massive small cell deployment scenario. Change of best cell on

35、a configured secondary downlink frequency (event 2g) - Event 2g is an inter-frequency measurement event. It is applicable only to the secondary downlink frequency with configured HS-DSCH operation, and it can be configured on more than one secondary downlink frequency. Enhanced Serving Cell Change f

36、or Event 1C - The enhanced Serving Cell Change procedure could also be applied to Event 1C, which is defined in TS 25.308 2. 5 Heterogeneous Networks Enhancements Serving E-DCH cell decoupling - Serving E-DCH cell decoupling is introduced in order to improve the quality of reception of the uplink E-

37、DCH control channels and the E-DCH SI in the presence of strong uplink/downlink imbalance. The UE is configured with different serving HS-DSCH cell and serving E-DCH cell. Radio Links without DPCH/F-DPCH - The UE is configured with a subset of non-serving E-DCH radio links in the UE“s E-DCH active s

38、et to operate in the absence of DPCH/F-DPCH. However, a UE is allowed to only receive either E-HICH or both E-HICH and E-RGCH from these non-serving E-DCH cells to mitigate uplink interference to a cell that is unable to power control a UE in the presence of strong uplink/downlink imbalance. DPCCH2

39、transmission - In order to improve the quality of reception of the HS-DPCCH in the presence of strong uplink/imbalance, a new secondary uplink pilot channel (DPCCH2) is introduced in the serving HS-DSCH cell as the reference for the HS-DPCCH channel power. ETSI ETSI TS 125 300 V13.1.0 (2016-04)73GPP

40、 TS 25.300 version 13.1.0 Release 136 DCH Enhancements (FDD only) DCH enhancements aims at improving the link efficiency and UE battery performance for voice calls compared to R99 DCH. DCH enhancements constitutes of the following sub-features: DL overhead optimization Enhanced rate matching and tra

41、nsport channel multiplexing DL Frame Early Termination (DL FET) Uplink DPCCH with DL FET ACK Uplink DPDCH dynamic 10ms transmission DCH enhancements supports two modes (Basic and Full). The mode choice controls how the DL Frame Early Termination sub-feature operates, as described in 6.3. All other s

42、ub-features are active in both modes. DCH enhancements is only applicable for DCH 20 ms TTI on downlink. 6.1 DL overhead optimization This sub-feature introduces new DL DPCH slot format by removing the dedicated pilot bits from DL DPCCH and reusing them for DL DPDCH instead. The R99 downlink physica

43、l channel (DPCH) consists of 0.66ms slots that contain 2 groups of data (DPDCH) symbols and 3 groups of control (DPCCH) symbols. The size of the groups is determined by the slot format. The control symbol groups are TPC - controlling uplink transmit power, TFCI - specifying the downlink packet type,

44、 and dedicated pilot - supporting channel estimation for DL power control and closed-loop transmit diversity. While the TFCI group may be empty in certain slot formats, the pilot and TPC are currently always non-empty. The dedicated pilot bits are used for estimation of DL SIR. With this sub-feature

45、, new DL DPCH slot formats are introduced by removing the dedicated pilot bits and reusing the TPC bits instead for estimating the DL SIR. Correspondingly, the number of data symbols in a slot is increased leading to less control channel overhead on the downlink. DL closed-loop transmit diversity is

46、 not supported when this sub-feature is configured. 6.2 Enhanced rate matching and transport channel multiplexing The physical layer in R99 is designed to carry potentially a large variety of transport blocks with different sizes. The drawback for this design is the rate matching may not be efficien

47、t when some transport format combinations are not frequently used. For example, DCCH channel carries non-zero transport blocks not as often as voice DTCH channel. The enhanced rate matching and transport channel multiplexing sub-feature sets a zero rate matching attribute for DCCH, whenever DCCH cha

48、nnel does not carry a transport block together with DTCH channel. The DCCH bit fields are used to transmit DTCH transport channels instead. This potentially improves link efficiency due to less puncturing and better rate matching of the transport block with the available physical channel resources.

49、6.3 DL frame early termination (DL FET) and UL DPCCH with DL FET ACK In a power-controlled system such as R99 DCH, inefficiencies in the power-control loop, such as limited granularity, delays and errors in the feedback, result in the presence of excess SINR at the receiver. This means that packets such as the voice packets which have a long (20ms) transmission time interval (TTI) can often be early-decoded, i.e, decoded prior to reception of all the data symbols in a TTI by running the channel decoder at multiple time in