ETSI TS 125 224-2016 Universal Mobile Telecommunications System (UMTS) Physical layer procedures (TDD) (V13 0 0 3GPP TS 25 224 version 13 0 0 Release 13)《通用移动通信系统(UMTS) 物理层程序(时分双工).pdf

《ETSI TS 125 224-2016 Universal Mobile Telecommunications System (UMTS) Physical layer procedures (TDD) (V13 0 0 3GPP TS 25 224 version 13 0 0 Release 13)《通用移动通信系统(UMTS) 物理层程序(时分双工).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 224-2016 Universal Mobile Telecommunications System (UMTS) Physical layer procedures (TDD) (V13 0 0 3GPP TS 25 224 version 13 0 0 Release 13)《通用移动通信系统(UMTS) 物理层程序(时分双工).pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelPhysical (3GPP TS 25.2TECHNICAL SPECIFICATION125 224 V13.0.0 (2016elecommunications System (al layer procedures (TDD) .224 version 13.0.0 Release 1316-01) (UMTS); 13) ETSI ETSI TS 125 224 V13.0.0 (2016-01)13GPP TS 25.224 version 13.0.0 Release 13Reference RTS/TSGR-01252

2、24vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can b

3、e downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

4、existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、 subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People

6、/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wri

7、tten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPP

8、TM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 224 V13.0.0 (2016-01)23GPP TS 25.224 version 13.0.0 Release 13Intellectual Property

9、 Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essen

10、tial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried o

11、ut by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generatio

12、n Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and

13、ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Ru

14、les (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 224 V13.0.0 (2016-01)33GPP TS 25.224 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs termi

15、nology 2g3Foreword . 8g31 Scope 9g32 References 9g33 Abbreviations . 10g34 Physical layer procedures for the 3.84 Mcps option 11g34.1 General . 11g34.2 Transmitter Power Control . 11g34.2.1 General Parameters . 11g34.2.2 Uplink Control 11g34.2.2.1 General Limits. 11g34.2.2.2 PRACH . 12g34.2.2.3 DPCH

16、, PUSCH and HS-SICH 12g34.2.2.3.1 Gain Factors 12g34.2.2.3.2 Out of synchronisation handling 13g34.2.2.4 E-PUCH 13g34.2.2.4.1 Gain Factors for E-PUCH 14g34.2.2.5 E-RUCCH . 15g34.2.3 Downlink Control . 15g34.2.3.1 P-CCPCH 15g34.2.3.2 S-CCPCH, PICH . 15g34.2.3.2A MICH 15g34.2.3.3 SCH. 16g34.2.3.3A PNB

17、SCH . 16g34.2.3.4 DPCH, PDSCH . 16g34.2.3.4.1 Out of synchronisation handling 17g34.2.3.5 HS-PDSCH . 17g34.2.3.6 HS-SCCH 17g34.2.3.7 E-AGCH . 17g34.2.3.8 E-HICH . 17g34.3 Timing Advance . 17g34.4 Synchronisation procedures 18g34.4.1 Cell Search 18g34.4.2 Dedicated channel synchronisation . 18g34.4.2

18、.1 Synchronisation primitives 18g34.4.2.1.1 General 18g34.4.2.1.2 Downlink synchronisation primitives 18g34.4.2.1.2A Downlink synchronisation primitives for HS-channels . 19g34.4.2.1.3 Uplink synchronisation primitives . 19g34.4.2.2 Radio link monitoring . 20g34.4.2.2.1 Downlink radio link failure .

19、 20g34.4.2.2.2 Uplink radio link failure/restore 20g34.5 Discontinuous transmission (DTX) procedure . 20g34.5.1 Description of Special Bursts 20g34.5.2 Use of Special Bursts during DTX . 21g34.5.3 Use of Special Bursts for Initial Establishment / Reconfiguration . 21g34.5.4 Use of Special Bursts for

20、 DTX on Beacon Channels . 21g34.6 Downlink Transmit Diversity . 21g34.6.1 Transmit Diversity for PDSCH, DPCH, HS-SCCH, HS-PDSCH and E-AGCH . 21g34.6.2 Transmit Diversity for SCH and S-CCPCH . 22g34.6.2.1 SCH Transmission Scheme . 22g3ETSI ETSI TS 125 224 V13.0.0 (2016-01)43GPP TS 25.224 version 13.0

21、.0 Release 134.6.2.2 S-CCPCH Transmission Scheme 23g34.6.3 Transmit Diversity for Beacon Channels 23g34.6.3.1 SCTD Transmission Scheme 23g34.7 Random access procedure 24g34.7.1 Physical random access procedure 24g34.7A E-RUCCH transmission procedure 25g34.8 DSCH procedure 25g34.8.1 DSCH procedure wi

22、th TFCI indication 25g34.8.2 DSCH procedure with midamble indication . 26g34.9 Node B Synchronisation Procedure over the Air . 26g34.9.1 Frequency Acquisition Phase 26g34.9.2 Initial Synchronisation 26g34.9.3 Steady-State Phase 26g34.9.4 Late entrant cells . 26g34.10 Idle periods for IPDL location m

23、ethod . 27g34.10.1 General 27g34.10.2 Parameters of IPDL 27g34.10.3 Calculation of idle period position 27g34.11 HS-DSCH Procedure 28g34.11.1 Link Adaptation Procedure . 28g34.11.2 HS-DSCH Channel Quality Indication Procedure 29g34.12 Macro-diversity procedure . 30g34.13 E-DCH related procedures . 3

24、0g34.13.1 ACK/NACK detection 30g34.13.2 Serving and neighbour cell pathloss metric derivation . 30g34.13.3 Channelisation code hopping procedure for E-PUCH 31g34.14 Physical Layer Procedures for 3.84 Mcps MBSFN IMB . 33g34.14.1 Radio frame timing on the MBSFN layer . 33g34.14.2 Downlink Power Contro

25、l 33g34.14.2.1 S-CCPCH 33g34.14.2.2 MICH 33g34.14.2.3 P-CPICH . 34g34.14.2.4 T-CPICH . 34g35 Physical layer procedures for the 1.28 Mcps option 34g35.1 Transmitter Power Control . 34g35.1.1 Uplink Control 34g35.1.1.1 General limits 34g35.1.1.2 UpPCH 34g35.1.1.3 PRACH . 35g35.1.1.4 DPCH and PUSCH . 3

26、5g35.1.1.4.1 Gain Factors 35g35.1.1.4.2 Out of synchronization handling . 35g35.1.1.5 HS-SICH . 36g35.1.1.6 E-PUCH 37g35.1.1.6.1 Gain Factors for E-PUCH 38g35.1.1.7 E-RUCCH . 39g35.1.1.8 Standalone midamble channel . 39g35.1.2 Downlink Control . 39g35.1.2.1 P-CCPCH 39g35.1.2.2 The power of the FPACH

27、 . 39g35.1.2.3 S-CCPCH, PICH . 39g35.1.2.3A MICH 40g35.1.2.4 DPCH, PDSCH . 40g35.1.2.4.1 Out of synchronisation handling 40g35.1.2.5 HS-PDSCH . 40g35.1.2.6 HS-SCCH 40g35.1.2.7 PLCCH 41g35.1.2.8 E-AGCH . 41g35.1.2.9 E-HICH . 41g35.2 UL Synchronisation 41g35.2.1 General Description 41g3ETSI ETSI TS 12

28、5 224 V13.0.0 (2016-01)53GPP TS 25.224 version 13.0.0 Release 135.2.1.1 Preparation of uplink synchronization (downlink synchronization) . 41g35.2.1.2 Establishment of uplink synchronization 41g35.2.1.3 Maintenance of uplink synchronisation 42g35.2.2 UpPCH 42g35.2.3 PRACH . 42g35.2.4 DPCH and PUSCH

29、. 42g35.2.4.1 Out of synchronization handling . 43g35.2.5 HS-SICH . 43g35.2.6 E-PUCH 43g35.2.7 E-RUCCH . 43g35.2.8 Standalone midamble channel 44g35.3 Synchronisation procedures 44g35.3.1 Cell search 44g35.3.2 DCH synchronization . 44g35.3.2A Shared physical channel synchronization . 44g35.3.2A.1 Sy

30、nchronisation primitives 44g35.3.2A.1.1 General 44g35.3.2A.1.2 Downlink synchronisation primitives 44g35.3.2A.1.3 Uplink synchronisation primitives . 45g35.3.2A.2 Radio link monitoring . 45g35.3.2A.2.1 Downlink radio link failure . 45g35.3.2A.2.2 Uplink radio link failure/restore 45g35.3.3 Synchroni

31、zation procedure in CELL_FACH state . 46g35.3.3.1 Uplink synchronization status detection 46g35.3.3.2 Establishment of uplink synchronization 46g35.4 Discontinuous transmission (DTX) procedure . 46g35.4.1 Description of Special Bursts 46g35.4.2 Use of Special Bursts during DTX . 47g35.4.3 Use of Spe

32、cial Bursts for Initial Establishment / Reconfiguration . 47g35.5 Downlink Transmit Diversity . 47g35.5.1 Transmit Diversity for PDSCH, DPCH, HS-SCCH, HS-PDSCH and E-AGCH . 47g35.5.1.1 TSTD for PDSCH and DPCH . 47g35.5.1.2 Closed Loop Tx Diversity for PDSCH, DPCH, HS-SCCH, HS-PDSCH and E-AGCH 48g35.

33、5.2 Transmit Diversity for DwPCH 49g35.5.3 Transmit Diversity for P-CCPCH . 49g35.5.3.1 TSTD Transmission Scheme for P-CCPCH . 49g35.5.4 SCTD Transmission Scheme for Beacon Channels 49g35.6 Random Access Procedure . 50g35.6.1 Definitions 50g35.6.1A UpPCH sub-channel . 51g35.6.2 Preparation of random

34、 access . 51g35.6.3 Random access procedure . 52g35.6.3.1 The use and generation of the information fields transmitted in the FPACH . 53g35.6.3.1.1 Signature Reference Number . 53g35.6.3.1.2 Relative Sub-Frame Number . 54g35.6.3.1.3 Received starting position of the UpPCH (UpPCHPOS) . 54g35.6.3.1.4

35、Transmit Power Level Command for the RACH message 54g35.6.3A E-RUCCH procedure 54g35.6.4 Random access collision . 55g35.7 Node B Synchronisation Procedure over the Air . 55g35.7.1 Initial Synchronisation 55g35.7.2 Steady-State Phase 55g35.7.3 Late entrant cells . 56g35.8 Idle periods for IPDL locat

36、ion method . 56g35.8.1 General 56g35.8.2 Parameters of IPDL 56g35.8.3 Calculation of idle period position 56g35.9 HS-DSCH Procedure in CELL_DCH state 57g35.9.1 Link Adaptation Procedure . 57g35.9.2 HS-DSCH Channel Quality Indication Procedure 58g35.9.3 HS-SCCH monitoring procedure 59g35.9A HS-DSCH P

37、rocedure in CELL_FACH state 60g3ETSI ETSI TS 125 224 V13.0.0 (2016-01)63GPP TS 25.224 version 13.0.0 Release 135.9A.1 Link Adaptation Procedure . 60g35.9A.2 HS-DSCH Channel Quality Indication Procedure 60g35.9A.3 HS-SCCH monitoring procedure 60g35.9B HS-DSCH Procedure in CELL_PCH or URA_PCH state .

38、60g35.9B.1 Link Adaptation Procedure . 60g35.9B.2 HS-DSCH Channel Quality Indication Procedure 61g35.9B.3 HS-SCCH monitoring procedure 61g35.10 Macro-diversity procedure . 61g35.11 E-DCH Procedure. 62g35.11.1 ACK/NACK detection 62g35.11.2 Serving and neighbour cell pathloss metric derivation . 62g35

39、.11.3 E-AGCH monitoring in CELL_DCH state . 63g35.11.3A E-AGCH monitoring in CELL_FACH state . 63g35.12 MIMO operation of HS-DSCH 64g35.12.1 General procedure . 64g35.12.2 Identification of MIMO dual stream . 64g35.12.3 UE antennas Time Switched Transmission 65g35.12A MU-MIMO operation of HS-DSCH an

40、d E-DCH . 65g35.13 Control Channel Discontinuous reception procedures . 66g35.13.1 Discontinuous downlink reception . 67g35.13.2 HS-SCCH orders 67g36 Physical layer procedures for the 7.68 Mcps option 68g36.1 Transmitter Power Control . 68g36.2 Timing Advance . 68g36.3 Synchronisation procedures 68g

41、36.4 Discontinuous transmission (DTX) procedure . 68g36.5 Downlink Transmit Diversity . 69g36.5.1 Transmit Diversity for PDSCH, DPCH, HS-SCCH, HS-PDSCH and E-AGCH . 69g36.5.2 Transmit Diversity for SCH and S-CCPCH . 69g36.5.3 Transmit Diversity for Beacon Channels 69g36.5.3.1 SCTD Transmission Schem

42、e 69g36.6 Random access procedure 69g36.6.1 Physical random access procedure 70g36.6A E-RUCCH transmission procedure 70g36.7 DSCH procedure 70g36.8 Idle periods for IPDL location method . 70g36.9 HS-DSCH Procedure 70g36.9.1 Link Adaptation Procedure . 70g36.9.2 HS-DSCH Channel Quality Indication Pro

43、cedure 71g36.10 Macro-diversity procedure . 71g36.11 E-DCH related procedures . 71g36.11.1 ACK/NACK detection 71g36.11.2 Serving and neighbour cell pathloss metric derivation . 71g36.11.3 Channelisation code hopping procedure for E-PUCH 71g3Annex A (informative): Power Control 74g3A.1 Example Implem

44、entation of Downlink Power Control in the UE 74g3A.2 Example Implementation of Closed Loop Uplink Power Control in Node B for 1.28Mcps TDD 74g3A.3 Example Implementation of Downlink Power Control in UE for 1.28Mcps TDD when TSTD is used. 74g3A.4 Example Implementation of open Loop Power Control for

45、access procedure for 1.28Mcps TDD . 75g3A.5 Example Implementation of Closed Loop Uplink HS-SICH Power Control in Node B for 1.28Mcps TDD . 75g3Annex B (informative): Determination of Weight Information . 76g3B.1 STD Weights 76g3B.2 TxAA Weights . 76g3ETSI ETSI TS 125 224 V13.0.0 (2016-01)73GPP TS 2

46、5.224 version 13.0.0 Release 13Annex C (informative): Cell search procedure for 3.84Mcps TDD . 77g3Annex CA (informative): Cell search procedure for 1.28Mcps TDD . 78g3Annex CB (informative): Examples random access procedure for 1.28Mcps TDD 80g3Annex D (informative): Change history . 82g3History 85

47、g3ETSI ETSI TS 125 224 V13.0.0 (2016-01)83GPP TS 25.224 version 13.0.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following f

48、ormal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG fo

49、r approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 224 V13.0.0 (2016-01)93GPP TS 25.224 version 13.0.0 Release 131 Scope The present document describes the Physical Layer Procedures in the TDD mode of UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute pro