ETSI TS 125 212-2018 Universal Mobile Telecommunications System (UMTS) Multiplexing and channel coding (FDD) (V15 0 0 3GPP TS 25 212 version 15 0 0 Release 15).pdf

《ETSI TS 125 212-2018 Universal Mobile Telecommunications System (UMTS) Multiplexing and channel coding (FDD) (V15 0 0 3GPP TS 25 212 version 15 0 0 Release 15).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 212-2018 Universal Mobile Telecommunications System (UMTS) Multiplexing and channel coding (FDD) (V15 0 0 3GPP TS 25 212 version 15 0 0 Release 15).pdf（169页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 212 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Multiplexing and channel coding (FDD) (3GPP TS 25.212 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 212 V15.0.0 (2018-07)13GPP TS 25.212 version 15.0.0 Release 15Reference RTS/TSGR-0625212vf00

2、 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be down

3、loaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existi

4、ng or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subje

5、ct to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/Pe

6、ople/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the

7、 written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI regis

8、tered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 212 V15.0.0 (2018-07)23GPP TS 25.212 version 15.0.0 Release 15Intell

9、ectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intelle

10、ctual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includi

11、ng IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include tra

12、demarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present docu

13、ment does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or repor

14、ts using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminolo

15、gy In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETS

16、I deliverables except when used in direct citation. ETSI ETSI TS 125 212 V15.0.0 (2018-07)33GPP TS 25.212 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 9g31 Scope 10g32 References 10g33 Definitions, symbols and abbreviations . 1

17、0g33.1 Definitions 10g33.2 Symbols 12g33.3 Abbreviations . 12g34 Multiplexing, channel coding and interleaving 14g34.1 General . 14g34.2 General coding/multiplexing of TrCHs 14g34.2.0 Transport channel concatenation 19g34.2.1 CRC attachment 19g34.2.1.1 CRC Calculation . 19g34.2.1.2 Relation between

18、input and output of the CRC attachment block . 20g34.2.2 Transport block concatenation and code block segmentation . 20g34.2.2.1 Concatenation of transport blocks . 20g34.2.2.2 Code block segmentation 20g34.2.3 Channel coding . 21g34.2.3.1 Convolutional coding 22g34.2.3.2 Turbo coding . 22g34.2.3.2.

19、1 Turbo coder . 22g34.2.3.2.2 Trellis termination for Turbo coder . 23g34.2.3.2.3 Turbo code internal interleaver 23g34.2.3.3 Concatenation of encoded blocks 27g34.2.4 Radio frame size equalisation . 27g34.2.5 1stinterleaving 27g34.2.5.1 Void. 27g34.2.5.2 1stinterleaver operation . 27g34.2.5.3 Relat

20、ion between input and output of 1stinterleaving in uplink 29g34.2.5.4 Relation between input and output of 1stinterleaving in downlink . 29g34.2.6 Radio frame segmentation 29g34.2.6.1 Relation between input and output of the radio frame segmentation block in uplink . 29g34.2.6.2 Relation between inp

21、ut and output of the radio frame segmentation block in downlink 30g34.2.7 Rate matching . 30g34.2.7.1 Determination of rate matching parameters in uplink . 32g34.2.7.1.1 Determination of SF and number of PhCHs needed 32g34.2.7.2 Determination of rate matching parameters in downlink 35g34.2.7.2.1 Det

22、ermination of rate matching parameters for fixed positions of TrCHs 35g34.2.7.2.1A Determination of rate matching parameters for pseudo-flexible positions of TrCHs 37g34.2.7.2.2 Determination of rate matching parameters for flexible positions of TrCHs 37g34.2.7.3 Bit separation and collection in upl

23、ink 39g34.2.7.3.1 Bit separation . 41g34.2.7.3.2 Bit collection . 41g34.2.7.4 Bit separation and collection in downlink . 42g34.2.7.4.1 Bit separation . 43g34.2.7.4.2 Bit collection . 43g34.2.7.5 Rate matching pattern determination 44g34.2.8 TrCH multiplexing 45g34.2.9 Insertion of discontinuous tra

24、nsmission (DTX) indication bits 45g34.2.9.1 1stinsertion of DTX indication bits . 45g34.2.9.2 2ndinsertion of DTX indication bits 46g3ETSI ETSI TS 125 212 V15.0.0 (2018-07)43GPP TS 25.212 version 15.0.0 Release 154.2.10 Physical channel segmentation . 47g34.2.10.1 Relation between input and output o

25、f the physical segmentation block in uplink 47g34.2.10.2 Relation between input and output of the physical segmentation block in downlink . 47g34.2.11 2ndinterleaving 47g34.2.11.1 2ndinterleaving for Secondary CCPCH with 16QAM 48g34.2.12 Physical channel mapping 49g34.2.12.1 Uplink . 49g34.2.12.1.1

26、UL_DPCH_10ms_Mode is not configured by higher layers, or, no compressed-mode transmission gap overlaps with the first radio frame in the 20ms CI. 49g34.2.12.1.2 UL_DPCH_10ms_Mode is configured by higher layers, and, a compressed-mode transmission gap overlaps with the first radio frame in 20ms CI 49

27、g34.2.12.2 Downlink . 50g34.2.13 Restrictions on different types of CCTrCHs . 50g34.2.13.1 Uplink Dedicated channel (DCH) . 50g34.2.13.2 Random Access Channel (RACH) 50g34.2.13.3 Void. 51g34.2.13.4 Downlink Dedicated Channel (DCH) . 51g34.2.13.5 Void. 51g34.2.13.6 Broadcast channel (BCH) . 51g34.2.1

28、3.7 Forward access and paging channels (FACH and PCH) . 51g34.2.13.8 High Speed Downlink Shared Channel (HS-DSCH) associated with a DCH . 51g34.2.13.9 Enhanced Dedicated Channel (E-DCH) 51g34.2.14 Multiplexing of different transport channels into one CCTrCH, and mapping of one CCTrCH onto physical c

29、hannels 52g34.2.14.1 Allowed CCTrCH combinations for one UE 52g34.2.14.1.1 Allowed CCTrCH combinations on the uplink . 52g34.2.14.1.2 Allowed CCTrCH combinations on the downlink 53g34.3 Transport format detection . 53g34.3.1 Blind transport format detection . 53g34.3.1A Single transport format detec

30、tion 54g34.3.2 Transport format detection based on TFCI . 54g34.3.3 Coding of Transport-Format-Combination Indicator (TFCI) . 54g34.3.4 Void 55g34.3.5 Mapping of TFCI words . 56g34.3.5.1 Mapping of TFCI word in normal mode in downlink, and in uplink when uplink DPCCH slot format is not 5 . 56g34.3.5

31、.1A Mapping of TFCI word in normal mode in uplink when uplink DPCCH slot format is 5 56g34.3.5.1.1 Mapping of TFCI bits for Secondary CCPCH with 16QAM 56g34.3.5.2 Mapping of TFCI word in compressed mode . 56g34.3.5.2.1 Uplink compressed mode 56g34.3.5.2.2 Downlink compressed mode . 57g34.3A Mapping

32、of DL FET ACK/NACK bits 57g34.4 Compressed mode 58g34.4.1 Frame structure in the uplink 58g34.4.2 Frame structure types in the downlink 59g34.4.2A Frame structure in the downlink for F-DPCH 59g34.4.2B Frame structure in the downlink for F-TPICH 59g34.4.3 Transmission time reduction method 59g34.4.3.

33、1 Void. 60g34.4.3.2 Compressed mode by reducing the spreading factor by 2 . 60g34.4.3.3 Compressed mode by higher layer scheduling 60g34.4.4 Transmission gap position 60g34.4.5 Transmission gap position for E-DCH . 62g34.4.5.1 E-DPDCH Transmission Gap Position during Initial Transmissions 62g34.4.5.

34、2 E-DPDCH Transmission Gap Position during Retransmissions . 62g34.4.5.3 E-DPCCH Transmission Gap Position 62g34.5 Coding for HS-DSCH 62g34.5.1 CRC attachment for HS-DSCH 64g34.5.1.1 CRC attachment method 1 for HS-DSCH . 64g34.5.1.2 CRC attachment method 2 for HS-DSCH . 65g34.5.1A Bit scrambling for

35、 HS-DSCH . 65g34.5.2 Code block segmentation for HS-DSCH 65g3ETSI ETSI TS 125 212 V15.0.0 (2018-07)53GPP TS 25.212 version 15.0.0 Release 154.5.3 Channel coding for HS-DSCH 65g34.5.4 Hybrid ARQ for HS-DSCH 66g34.5.4.1 HARQ bit separation . 66g34.5.4.2 HARQ First Rate Matching Stage . 66g34.5.4.3 HAR

36、Q Second Rate Matching Stage 67g34.5.4.4 HARQ bit collection . 68g34.5.5 Physical channel segmentation for HS-DSCH 68g34.5.6 Interleaving for HS-DSCH . 69g34.5.7 Constellation re-arrangement for 16 QAM and 64QAM 69g34.5.8 Physical channel mapping for HS-DSCH . 70g34.6 Coding for HS-SCCH type 1 70g34

37、.6.1 Overview 70g34.6.2 HS-SCCH information field mapping 71g34.6.2.1 Redundancy and constellation version coding 71g34.6.2.2 Modulation scheme mapping 72g34.6.2.3 Channelization code-set mapping . 72g34.6.2.4 UE identity mapping . 73g34.6.2.5 HARQ process identifier mapping 73g34.6.2.6 Transport bl

38、ock size index mapping . 73g34.6.3 Multiplexing of HS-SCCH information 73g34.6.4 CRC attachment for HS-SCCH 73g34.6.5 Channel coding for HS-SCCH 73g34.6.6 Rate matching for HS-SCCH 74g34.6.7 UE specific masking for HS-SCCH 74g34.6.8 Physical channel mapping for HS-SCCH . 74g34.6A Coding for HS-SCCH

39、type 2 74g34.6A.1 Overview 74g34.6A.2 HS-SCCH Type 2 information field mapping 75g34.6A.2.1 The first transmission 75g34.6A.2.2 The second and the third transmissions . 76g34.6A.2.2.1 Special Information mapping . 76g34.6A.2.2.1.1 Transport-block size information mapping 76g34.6A.2.2.1.2 Pointer to

40、the previous transmission mapping 76g34.6A.2.2.1.3 Second or third transmission mapping . 76g34.6A.2.2.2 Redundancy and Constellation Version mapping 76g34.6A.2.2.3 Modulation scheme mapping . 77g34.6A.2.2.4 Channelization code-set mapping 77g34.6A.2.2.5 UE identity mapping 77g34.6A.3 Multiplexing o

41、f HS-SCCH Type 2 information 77g34.6A.4 CRC attachment for HS-SCCH Type 2 77g34.6A.5 Channel coding for HS-SCCH Type 2 77g34.6A.6 Rate matching for HS-SCCH Type 2 77g34.6A.7 UE specific masking for HS-SCCH Type 2 77g34.6A.8 Physical channel mapping for HS-SCCH Type 2 . 77g34.6B Coding for HS-SCCH ty

42、pe 3 77g34.6B.1 Overview 77g34.6B.2 HS-SCCH type 3 information field mapping 79g34.6B.2.1 Redundancy and constellation version coding 79g34.6B.2.2 Modulation scheme and number of transport blocks mapping 80g34.6B.2.3 Channelization code-set mapping . 80g34.6B.2.4 UE identity mapping . 81g34.6B.2.5 H

43、ARQ process identifier mapping 81g34.6B.2.6 Transport block size index mapping . 81g34.6B.2.7 Precoding Weight Information mapping . 81g34.6B.3 Multiplexing of HS-SCCH type 3 information . 82g34.6B.4 CRC attachment for HS-SCCH type 3 82g34.6B.5 Channel coding for HS-SCCH type 3 . 83g34.6B.6 Rate mat

44、ching for HS-SCCH type 3 . 83g34.6B.7 UE specific masking for HS-SCCH type 3 . 83g34.6B.8 Physical channel mapping for HS-SCCH type 3 83g34.6C Coding for HS-SCCH orders 83g34.6C.1 Overview 83g3ETSI ETSI TS 125 212 V15.0.0 (2018-07)63GPP TS 25.212 version 15.0.0 Release 154.6C.2 HS-SCCH Order informa

45、tion field mapping in the CELL_DCH state . 84g34.6C.2.1 Order type mapping. 84g34.6C.2.2 Order mapping 84g34.6C.2.2.1 Orders for activation and deactivation of DTX, DRX and HS-SCCH-less operation and for HS-DSCH serving cell change 84g34.6C.2.2.2 Orders for activation and deactivation of Secondary s

46、erving HS-DSCH cells and Secondary uplink frequency 85g34.6C.2.2.3 Orders for Switching between Uplink Closed Loop Transmit Diversity Activation states . 92g34.6C.2.2.4 Orders for activating and de-activating demodulation common pilots (D-CPICH) when the UE is configured in MIMO mode with four trans

47、mit antennas . 92g34.6C.2.2.5 Orders for switching the E-DCH TTI, and for start/stop a simplified HS-SCCH type 1 transmission interval 93g34.6C.2.3 UE identity mapping . 94g34.6C.3 HS-SCCH order information field mapping in the CELL_FACH and CELL_PCH states . 94g34.6C.3.1 Order type mapping. 94g34.6

48、C.3.2 Order mapping 94g34.6C.3.2.1 Orders for network triggered HS-DPCCH transmission . 94g34.6C.3.2.2 Orders for HS-DSCH reception during CELL_FACH HS-SCCH DRX operation . 94g34.6D Coding for HS-SCCH type 4 94g34.6D.1 Overview 94g34.6D.2 HS-SCCH type 4 information field mapping 95g34.6D.2.1 Redunda

49、ncy and constellation version coding 95g34.6D.2.2 Modulation scheme and number of transport blocks mapping 96g34.6D.2.3 Channelization code-set mapping . 97g34.6D.2.4 UE identity mapping . 97g34.6D.2.5 HARQ process identifier mapping 97g34.6D.2.6 Transport block size index mapping . 98g34.6D.2.7 Precoding Weight Information mapping . 98g34.6D.3 Multiplexing of HS-SCCH type 4 information . 99g34.6D.4 CRC attachment for HS-SCCH type 4 100g34.6D.5 Channel coding for HS-SCCH type 4 . 101g34.6D.6 Rate matching for HS-SCCH type 4 . 101g34.6D.7 UE specific masking for HS-SCCH type 4