ETSI TS 124 581-2017 LTE Mission Critical Video (MCVideo) media plane control Protocol specification (V14 1 0 3GPP TS 24 581 version 14 1 0 Release 14).pdf
《ETSI TS 124 581-2017 LTE Mission Critical Video (MCVideo) media plane control Protocol specification (V14 1 0 3GPP TS 24 581 version 14 1 0 Release 14).pdf》由会员分享,可在线阅读,更多相关《ETSI TS 124 581-2017 LTE Mission Critical Video (MCVideo) media plane control Protocol specification (V14 1 0 3GPP TS 24 581 version 14 1 0 Release 14).pdf(137页珍藏版)》请在麦多课文档分享上搜索。
1、 ETSI TS 124 581 V14.0.0 (2017-07) LTE; Mission Critical Video (MCVideo) media plane control; Protocol specification (3GPP TS 24.581 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 124 581 V14.0.0 (2017-07)13GPP TS 24.581 version 14.0.0 Release 14Reference DTS/TSGC-0124581ve00 Keywor
2、ds LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded f
3、rom: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or pe
4、rceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to re
5、vision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Com
6、miteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written
7、 authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered f
8、or the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 124 581 V14.0.0 (2017-07)23GPP TS 24.581 version 14.0.0 Release 14Intellectual
9、 Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPR
10、s); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been
11、carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd
12、Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS,
13、3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Dr
14、afting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 581 V14.0.0 (2017-07)33GPP TS 24.581 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal ve
15、rbs terminology 2g3Foreword . 11g31 Scope 12g32 References 12g33 Definitions, symbols and abbreviations . 12g33.1 Definitions 12g33.2 Symbols 13g33.3 Abbreviations . 13g34 General . 13g34.1 MCVideo overview 13g35 Functional entities 13g36 On-network transmission control . 13g36.1 General . 13g36.2 T
16、ransmission participant procedures 13g36.2.1 Transmission participant procedures at MCVideo session initialization 13g36.2.2 Transmission participant procedures at MCVideo call release . 14g36.2.3 Transmission participant procedures at MCVideo call modification 14g36.2.4 Transmission participant sta
17、te transition diagram for basic transmission control operation 14g36.2.4.1 General 14g36.2.4.2 State: Start-stop 15g36.2.4.2.1 General 15g36.2.4.2.2 MCVideo call initiated, originating MCVideo user 16g36.2.4.2.3 MCVideo call established, terminating MCVideo user . 16g36.2.4.3 State: U: has no permis
18、sion to transmit . 16g36.2.4.3.1 General 16g36.2.4.3.2 Send Transmit Media Request message (Click transmit media send button) 16g36.2.4.3.3 Receive Transmit Media Granted message (R: Transmit Media Granted) 17g36.2.4.3.4 Receive Media reception notification message (R: Media reception notification)
19、17g36.2.4.4 State: U: pending request to transmit . 17g36.2.4.4.1 General 17g36.2.4.4.2 Receive Transmit media rejected message (R: Transmit Media rejected) . 17g36.2.4.4.3 Timer T101 (Transmit media request) expired 18g36.2.4.4.4 Timer T101 (Transmit Media Request) expired N times . 18g36.2.4.4.5 R
20、eceive Queue Position Info message (R: Queue Position Info) 18g36.2.4.4.6 Receive Transmit Media Granted message (R: Transmit Media Granted) 18g36.2.4.5 State: U: has permission to transmit 19g36.2.4.5.1 General 19g36.2.4.5.2 Send RTP media packets (S: RTP media) . 19g36.2.4.5.3 Send Transmit media
21、end message (Click transmit media end button) . 19g36.2.4.5.4 Receive Transmit media end message (R: transmit media end request) 19g36.2.4.5.5 Receive Transmission Revoked message (R: Transmission Revoked) . 19g36.2.5.5.6 Receive Media reception notification message (R: Media Reception notification)
22、 . 20g36.2.4.6 State: U: pending release of transmission 20g36.2.4.6.1 General 20g36.2.4.6.2 Timer T100 (Transmit Media Release) expired 20g36.2.4.6.3 Timer T100 (Transmit media release) expired N times . 20g36.2.4.6.4 Receive Transmit Media End Response message (R: Transmit media end response) . 20
23、g36.2.4.6.5 Send Transmit Media End Response message (S: Transmit media end response) 21g36.2.4.7 In any state 21g36.2.4.7.1 General 21g3ETSI ETSI TS 124 581 V14.0.0 (2017-07)43GPP TS 24.581 version 14.0.0 Release 146.2.4.7.2 Receive MCVideo call release step 1 (R: MCVideo call release - 1) . 21g36.
24、2.4.8 State: Call releasing . 21g36.2.4.8.1 General 21g36.2.4.8.2 Receive MCVideo call release step 2 (R: MCVideo call release - 2) . 21g36.2.4.9 State: U: queued transmission 22g36.2.4.9.1 General 22g36.2.4.9.2 Receive Queue Position Info message (R: Queue Position Info) 22g36.2.4.9.3 Send Queue Po
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ETSITS1245812017LTEMISSIONCRITICALVIDEOMCVIDEOMEDIAPLANECONTROLPROTOCOLSPECIFICATIONV14103GPPTS24581VERSION1410RELEASE14PDF

链接地址:http://www.mydoc123.com/p-741379.html