ETSI TS 122 001-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Principles of circuit telecommunication services .pdf

《ETSI TS 122 001-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Principles of circuit telecommunication services .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 122 001-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Principles of circuit telecommunication services .pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 122 001 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Principles of circuit telecommunication services supported by a Public Land Mobile Network (PLMN) (3GPP TS 22.001 version 14.0.0 Release 14 TECHNICAL SPE

2、CIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 122 001 V14.0.0 (2017-03)13GPP TS 22.001 version 14.0.0 Release 14Reference RTS/TSGS-0122001ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret

3、N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The

4、content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable

5、Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.ets

6、i.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or m

7、echanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunicat

8、ions Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GS

9、M logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 001 V14.0.0 (2017-03)23GPP TS 22.001 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining t

10、o these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. L

11、atest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETS

12、I Web server) which are, or may be, or may become, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ET

13、SI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to

14、be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 001 V14.0.0 (2017-03)33GPP TS 22.001 version 14.0.0 Release 14Content

15、s Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g30 Scope 6g30.1 References 6g30.2 Abbreviations . 6g31 Framework for the description of telecommunication services 7g31.1 The attribute method of characterization of circuit telecommunication services . 7g32 Desc

16、ription of circuit telecommunication services by the attribute method 7g32.1 General . 7g32.2 Categorisation of telecommunication services . 7g33 Characterization of circuit telecommunication services . 7g33.1 General . 7g33.2 Bearer services . 8g33.3 Teleservices 8g34 Provision of telecommunication

17、 services . 8g34.1 Subscription checking for Basic Services 9g34.2 Subscription checking for Supplementary Services . 10g3Annex A (normative): List of definition of attributes and values used for bearer services . 11g3A.1 Information transfer attributes 11g3A.1.1 Information transfer capability . 11

18、g3A.1.2 Information transfer mode 11g3A.1.3 Information transfer rate . 11g3A.1.4 Structure . 11g3A.1.5 Establishment of communication . 12g3A.1.6 Communication configuration 12g3A.1.7 Symmetry . 12g3A.1.8 Data compression . 13g3A.2 Attributes describing the access at the user equipment 13g3A.2.1 Si

19、gnalling access 13g3A.2.2 Information access 13g3A.2.2.1 Rate . 13g3A.2.2.2 Interface 13g3A.3 Interworking attribute . 14g3A.3.1 Type of terminating network 14g3A.3.2 Terminal to terminating network interface . 14g3A.4 General attributes . 14g3A.4.1 Supplementary services provided . 14g3A.4.2 Qualit

20、y of service . 14g3A.4.3 Commercial and operational. 15g3A.4.4 Service interworking 15g3Annex B (normative): List of definitions of attributes and values used for teleservices . 16g3B.1 High layer attributes . 16g3B.1.1 Type of user information 16g3B.1.2 Layer 4 protocol functions 16g3B.1.3 Layer 5

21、protocol functions 16g3B.1.4 Layer 6 protocol functions 16g3ETSI ETSI TS 122 001 V14.0.0 (2017-03)43GPP TS 22.001 version 14.0.0 Release 14B.1.5 Layer 7 protocol functions 16g3B.2 Low layer attribute (bearer capabilities). 16g3B.3 General attributes . 16g3Annex C (normative): Definition of “busy“ in

22、 a PLMN 17g3C.1 Scope 17g3C.2 Network Determined User Busy (NDUB) condition . 17g3C.3 User Determined User Busy (UDUB) condition 17g3C.4 Mobile subscriber busy 17g3Annex D (normative): Call set-up procedures . 18g3D.1 Scope 18g3D.2 Mobile Originated Call Set-up . 18g3D.2.1 Called Party Address 18g3D

23、.2.2 Calling/Called Party Sub-address . 18g3D.2.3 Type of Number . 18g3D.2.4 Number Plan Indicator . 18g3D.2.5 Bearer Capability 19g3D.2.6 Calling Line Indication Restriction Override . 19g3D.2.7 Action of the Network on Call Set-up 19g3D.3 Mobile Terminated Call Set-up 19g3D.3.1 Bearer Type 19g3D.3

24、.2 Response of the UE 20g3D.3.3 Description of Call Re-establishment . 20g3Annex E (normative): Automatic calling repeat call attempt restrictions 21g3Annex F(informative): Procedures for call progress indications 23g3F.1 General . 23g3F.2 Supervisory tones . 23g3F.2.1 General . 23g3F.2.2 Method . 2

25、3g3F.2.3 Standard tones 23g3F.2.4 Applicability . 24g3F.2.5 Comfort tones . 24g3F.3 Recorded announcements . 25g3F.4 Application of call control cause information elements to supervisory tones 26g3Annex G (informative): Change history . 27g3History 28g3ETSI ETSI TS 122 001 V14.0.0 (2017-03)53GPP TS

26、22.001 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document defines the telecommunication services supported by a GSM PLMN within the digital cellular telecommunications system (Phase 2+). The co

27、ntents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as fol

28、lows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc

29、. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 001 V14.0.0 (2017-03)63GPP TS 22.001 version 14.0.0 Release 140 Scope The present document covers the definition of the circuit telecommunication services supported by a PLMN. The

30、purpose of the present document is to provide a method for the characterization and the description of these telecommunication services. TS 22.101 describes overall service principles of a PLMN. 0.1 References The following documents contain provisions which, through reference in this text, constitu

31、te provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a ref

32、erence to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 ITU-T Recommendation I.221: “Common specific characteristics

33、of services“. 3 ITU-T Recommendation X.200: “Information technology - Open Systems Interconnection - Basic reference model: The basic model“. 4 3GPP TS 22.101: “Service Principles“. 5 3GPP TS 22.002: “Bearer services supported by a PLMN“. 6 3GPP TS 22.003: “Teleservices supported by a PLMN“. 7 3GPP

34、TS 22.004: “General on Supplementary Services“. 8 3GPP TS 27.001: “General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)“. 9 3GPP TS 22.030: “Man-Machine Interface (MMI) of the User equipment (MS)“. 10 3GPP TS 22.081: “Line Identification Supplementary Services; Stage 1“. 11 3GPP T

35、S 22.135: “Multicall; Stage 1“. 12 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 13 3GPP TS 22.011: “Service accessibility“. 14 3GPP TS 23.003: “Numbering, addressing and identification“. 0.2 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905 1. E

36、TSI ETSI TS 122 001 V14.0.0 (2017-03)73GPP TS 22.001 version 14.0.0 Release 141 Framework for the description of telecommunication services 1.1 The attribute method of characterization of circuit telecommunication services This characterization is made by using a set of attributes. A telecommunicati

37、on service attribute is a specific characteristic of that service whole values distinguish it from other telecommunication services. Particular values are assigned to each attribute when a given telecommunication service is described and defined. A list of definitions of attributes and values used f

38、or bearer services and teleservices is contained in, respectively, annex A and annex B. 2 Description of circuit telecommunication services by the attribute method 2.1 General Telecommunication services are described by attributes which define service characteristics as they apply at a given referen

39、ce point where the customer accesses the service. The description of a telecommunication service by the method of attributes is composed of: - technical attributes as seen by the customer; and - other attributes associated with the service provision, e.g. operational and commercial attributes. 2.2 C

40、ategorisation of telecommunication services The concepts introduced in the present document are illustrated in table1. Table 1: Categorisation of telecommunication services TELECOMMUNICATION SERVICES BEARER SERVICE TELESERVICE Basic Bearer Service Basic Bearer service + supplementary services Basic

41、Teleservice Basic Teleservice + supplementary service 3 Characterization of circuit telecommunication services 3.1 General A telecommunication service supported by a PLMN is characterized and described by service attributes. There are two groups of service attributes applicable to user information f

42、low: - low layer attributes; - high layer attributes. ETSI ETSI TS 122 001 V14.0.0 (2017-03)83GPP TS 22.001 version 14.0.0 Release 14Bearer services are characterized only by low layer attributes. Teleservices are characterized by both low layer attributes and high layer attributes. The basic charac

43、teristics of a telecommunication service are described by the basic service attributes. The additional characteristics associated with a supplementary service which modify or supplement a basic telecommunication service are described in Specification 3GPP TS 22.004 7. 3.2 Bearer services Bearer serv

44、ices are characterized by a set of low layer attributes in Specification 3GPP TS 22.0025. These attributes are classified into four categories: - information transfer attributes; - access attributes; - interworking attributes; - general attributes, including operational and commercial attributes. Th

45、e bearer capability defines the technical features of a bearer service as they appear to the user at the appropriate access point. For the time being, the bearer capability is characterized by information transfer, access and interworking attributes. A bearer capability is associated with every bear

46、er service. 3.3 Teleservices Circuit teleservices provide the full capacity for communication by means of terminals and network functions and possibly functions provided by dedicated centres. Circuit teleservices are specified in 3GPP TS 22.003 6. Teleservices are characterized by a set of low layer

47、 attributes, a set of high layer attributes and operational and commercial attributes. Low layer attributes are those used to characterize the bearer capability. High layer attributes are used in Specification 3GPP TS 22.003 6 to describe high layer (i.e. layer 4-7) information transfer related char

48、acteristics. They refer to functions and protocols of layers 4-7 in the ITU-T Recommendation X.200 framework which are concerned with the transfer, storage and processing of user messages (provided by a subscribers terminal, a retrieval centre or a network service centre). Therefore, not all attribu

49、tes can be applied directly at the user to terminal interface as they represent two kinds of features, the bearer capability and the terminal features, that are not directly perceived by the user. 4 Provision of telecommunication services Specifications 3GPP TS 22.1014 and 3GPP TS 22.011 13 define some aspects of the provisions of telecommunication services by a 3GPP system. The provision of telecommunication services implies: - subscription of basic services and possibly subscription to supplementary services; - registration i