ETSI TS 103 146-4-2017 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 4 Radio Programming Interface (RPI) (V1 1 1)《可重构无线电系统(RRS) 移动设备(M.pdf

《ETSI TS 103 146-4-2017 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 4 Radio Programming Interface (RPI) (V1 1 1)《可重构无线电系统(RRS) 移动设备(M.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 103 146-4-2017 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 4 Radio Programming Interface (RPI) (V1 1 1)《可重构无线电系统(RRS) 移动设备(M.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 103 146-4 V1.1.1 (2017-01) Reconfigurable Radio Systems (RRS); Mobile Device (MD) information models and protocols; Part 4: Radio Programming Interface (RPI) TECHNICAL SPECIFICATION ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)2 Reference DTS/RRS-0248 Keywords architecture, mobile, radio, SDR, so

2、ftware ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded f

3、rom: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or pe

4、rceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to re

5、vision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Com

6、miteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written

7、 authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM a

8、nd LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal ve

9、rbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Introduction 8g35 System Requirement Mapping . 9g36 Radio Virtual Machine specification 10g36.1 Concept of RVM 10

10、g36.2 Elementary RVM (eRVM) . 11g36.3 RVM Hierarchy 15g36.4 Data types . 16g36.4.1 Types and Values 16g36.4.2 Run-Time Data . 16g36.5 Arithmetic. 17g36.6 Exceptions 17g36.7 Control, Synchronization and Execution 17g36.8 Operations with Memory 18g36.9 RVM run-time environment . 18g37 Configcodes for

11、RVM 18g37.0 Introduction 18g37.1 Configcodes generation 18g37.2 Binary format for Configcodes . 20g37.3 XML schema for Configcodes . 23g38 Radio Library . 29g38.0 Introduction 29g38.1 Reference Radio Library 30g38.2 Native Radio Library 31g39 Loading, Linking and Initialization 31g310 Compiling for

12、RVM (Front-End Compilation) 32g3Annex A (informative): Mapping between XML and Binary 33g3Annex B (informative): SFB Candidate . 34g3Annex C (informative): Replacement of selected components of an existing RAT 36g3Annex D (informative): Introducing new SFBs . 37g3History 38g3ETSI ETSI TS 103 146-4 V

13、1.1.1 (2017-01)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Inte

14、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, incl

15、uding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) h

16、as been produced by ETSI Technical Committee Reconfigurable Radio Systems (RRS). The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.3. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “ma

17、y“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 146-4 V

18、1.1.1 (2017-01)5 1 Scope The scope of the present document is to define the Radio Programming Interface (RPI) for mobile device reconfiguration. The work is based on the Use Cases defined in ETSI TR 102 944 i.1, on the system requirements defined in ETSI EN 302 969 1 and on the radio reconfiguration

19、 related architecture for mobile devices defined in ETSI EN 303 095 i.2. Furthermore, the present document complements the mobile device information models and protocols related to the Multiradio Interface ETSI EN 303 146-1 i.3, to the Reconfigurable Radio Frequency Interface ETSI EN 303 146-2 i.4 a

20、nd to the Unified Radio Application Interface ETSI EN 303 146-3 i.5. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-spec

21、ific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were v

22、alid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 302 969 (V1.2.1): “Reconfigurable Radio Systems (RRS); Radio Reconfiguration related Requirements for Mobile Device

23、s“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including an

24、y amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a

25、particular subject area. i.1 ETSI TR 102 944: “Reconfigurable Radio Systems (RRS); Use Cases for Baseband Interfaces for Unified Radio Applications of Mobile Device“. i.2 ETSI EN 303 095 (V1.2.1): “Reconfigurable Radio Systems (RRS); Radio Reconfiguration related Architecture for Mobile Devices“. i.

26、3 ETSI EN 303 146-1: “Reconfigurable Radio Systems (RRS); Mobile Device Information Models and Protocols; Part 1: Multiradio Interface (MURI)“. i.4 ETSI EN 303 146-2 : “Reconfigurable Radio Systems (RRS); Mobile Device (MD) information models and protocols; Part 2: Reconfigurable Radio Frequency Int

27、erface (RRFI)“. i.5 ETSI EN 303 146-3: “Reconfigurable Radio Systems (RRS); Mobile Device (MD) information models and protocols; Part 3: Unified Radio Application Interface (URAI)“. ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)6 3 Definitions and abbreviations 3.1 Definitions For the purposes of the prese

28、nt document, the following terms and definitions apply: Abstract Processing Element (APE): abstracts computational resource that executes any computations downloaded from Radio Library NOTE: APE is connected with input and output DOs. APE is reactive. Any computations are started if all input DOs ar

29、e filled with real data. basic operations: operations either provided by the Radio Library and/or UDFB Set to eRVM or by the Radio Library and/or RVM/eRVM Configcodes to RVM NOTE: Each Basic Operation is mapped to a corresponding APE in the case of eRVM or mapped to a corresponding APE or RVM/eRVM i

30、n the case of RVM. data flow chart: reactive data flow computational model consisting of data and operators where data are connected with operators NOTE: Operators abstract computations. They are triggered by full data. Results of operator computations are written in connected output data if they ar

31、e empty. Data Object (DO): typeless token abstracting any type of data NOTE: DO provides a container for storing data. It can be empty if no data in the container or it can be full if there is data in the container. DO is allocated in the infinite and flat memory. Any RVM has access to this memory.

32、One or a few APEs from RVM can be connected with DO. DO acknowledges connected APEs about its status whether it empty or full. dynamic operation: operation that is performed by allocating the computational resources during run-time for each APE required executing the given operation NOTE 1: The reso

33、urces are deallocated upon completion of the corresponding operation NOTE 2: Dynamic operation is available only in the case of MDRC-7 defined in ETSI EN 302 969 1. In other words, dynamic operation is needed when RA requires the dynamic resource sharing. native radio library: library providing plat

34、form-specific description of each SFB that represents the target platform hardware port configuration: specification of the number of APEs inputs and outputs radio library authority: authority empowered to decide which components can be registered as new SFBs NOTE: Any suitable organization can take

35、 the role of a Radio Library Authority. The choice of the organization is beyond the scope of the present document. reference radio library: library providing normative definition of each SFB NOTE: There may be multiple such Reference Radio Libraries. For a given RA, a unique Reference Radio Library

36、 is used. Radio Virtual Machine (RVM): abstract machine that supports reactive and concurrent executions NOTE: A RVM may be implemented as a controlled execution environment that allows the selection of a trade-off between flexibility of base band code development and required (re-)certification eff

37、orts. Radio Virtual Machine Runtime Environment (RVM RE): software that allows running Radio Applications that might be Configcodes or executable codes ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)7 Software Intermediate Representation (SWIR): RA representation as data flow chart NOTE: SWIR file contains

38、information on all terminal objects, their parameters (cost, implement function, size, etc.) and connections (links, access type, source and destination). terminal operation: operation that will always be executed without any other interruption NOTE 1: Furthermore, terminal operation cannot be decom

39、posed into smaller operations. NOTE 2: “Terminal operations“ are equivalent to “atomic operations“, but additionally it indicates that a hierarchy is being used in which the “terminal operations“ are on the lowest level of hierarchy and they can be part of another operation. 3.2 Abbreviations For th

40、e purposes of the present document, the following abbreviations apply: AOT Ahead-Of-Time APE Abstract Processing Element ASF Abstract Switch Fabric BE Back End CC Configcodes Counter CSL Communication Services Layer CU Control Unit DO Data ObjecteRVM Elementary RVM eSFB Elementary SFB FB Functional

41、BlockFBRI FB Reusability Index FFT Fast Fourier Transform HD Hardware DimensionHW Hardware ID Identification IFFT Inverse Fast Fourier Transform IR Intermediate RepresentationJIT Just-In-Time LCF Last Configuration Flag MD Mobile Device MURI MUltiRadio Interface NAF Next Address FlagNCAO Next Config

42、code Address Offset RA Radio Application RAP Radio Application Package RAT Radio Access Technology RCF Radio Control Framework RE Runtime Environment RF Radio Frequency RLA Radio Library Authority ROS Radio Operating System RPI Radio Programming Interface RRFI Reconfigurable Radio Frequency Interfac

43、e RVM RE RVM Runtime Environment RVM Radio Virtual Machine SD Software DimensionSFB Standard Functional Block SWIR SoftWare Intermediate Representation UDFB User Defined Functional Block UMLUnified Modeling LanguageURA Unified Radio Applications URAI Unified Radio Applications Interface XML eXtensib

44、le Markup Language ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)8 4 Introduction A reconfigurable MD is capable of running multiple radios simultaneously and of changing the set of radios by loading new Radio Application Package (RAP). All Radio Applications (RAs) are called Unified Radio Applications (UR

45、As) when they exhibit a common behaviour from the reconfigurable MDs point of view i.2. In order to run multiple URAs, the reconfigurable MD will include Communication Services Layer (CSL), Radio Control Framework (RCF), Radio Platform and 4 sets of interfaces for their interconnection. Figure 4.1:

46、Four sets of interfaces for Reconfigurable MD Figure 4.1 illustrates the Reconfigurable MD architecture with the 4 sets of interfaces, i.e.: MURI for interfacing CSL and RCF i.2; RRFI for interfacing URA and RF Transceiver i.3; URAI for interfacing URA and RCF i.2; RPI for allowing an independent an

47、d uniform production of RAs. The present document defines RPI. ETSI ETSI TS 103 146-4 V1.1.1 (2017-01)9 g90g258g282g349g381g18g381g373g393g437g410g286g396g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g68g104g90g47g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g90g90g38g47g10

48、92g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g90g87g47g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g104g90g4g47Figure 4.2: UMLclass diagram for Radio Computer interfaces Figure 4.2 illustrates UMLclass diagram for Radio Computer interfaces. The reconfigurable MD may be seen

49、as a Radio Computer where individual URAs are engineered as software entities i.2. The present document is organized as follows: Clause 5 describes the system requirement mapping; Clause 6 describes the radio virtual machine specification; Clause 7 describes the Configcodes for RVM; Clause 8 describes the radio library structure; Clause 9 describes the load, linking and initialization; Clause 10 describes the compiling for RVM; Annex A describes the mapping between Binary and XML; Annex B describes SFB Candidat