ETSI TS 102 486-1-3-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf

《ETSI TS 102 486-1-3-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 486-1-3-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 486-1-3 V1.1.1 (2006-08)Technical Specification Electromagnetic compatibility and Radio spectrum Matters (ERM);Road Transport and Traffic Telematics (RTTT);Test specifications forDedicated Short Range Communication (DSRC)transmission equipment;Part 1: DSRC data link layer: medium access

2、 and logical link control;Sub-Part 3: Abstract Test Suite (ATS) and partial PIXIT proformafloppy3 ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 2 Reference DTS/ERM-TG37-001-3 Keywords DSRC, MAC, LLC, testing, ATS, TTCN, protocol ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +

3、33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made avai

4、lable in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a

5、 specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find e

6、rrors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in

7、 all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPP

8、TM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 3 Contents Intellectual Property Rights8 Foreword.8 1 Scope 9 2 References 9 3 Definitions and abbreviations.10 3.1 Definitions10 3.2 Abbreviations

9、.10 4 Abstract Test Method (ATM).11 4.1 DSRC MAC layer Abstract Test Method (ATM) for OBU .11 4.1.1 Test architecture11 4.2 DSRC MAC layer Abstract Test Method (ATM) for RSU 12 4.2.1 Test architecture12 4.3 DSRC LLC layer Abstract Test Method (ATM)12 4.3.1 Test architecture13 4.4 Test strategy .13 5

10、 Untestable Test Purposes (TP) .14 6 ATS conventions14 6.1 Naming conventions.14 6.1.1 Declarations part.14 6.1.1.1 General14 6.1.1.2 Test suite operations14 6.1.1.3 Test suite parameter declarations 14 6.1.1.4 Test case selection expression definition 15 6.1.1.5 Test suite constant declarations.15

11、6.1.1.6 Test suite variable declarations .15 6.1.1.7 Test case variable declarations15 6.1.1.8 Timer declarations.15 6.1.1.9 ASP type definitions .15 6.1.1.10 PDU type definitions.15 6.1.1.11 Co-ordination Message (CM) type definitions15 6.1.1.12 Alias definitions 15 6.1.2 Constraints part.15 6.1.2.

12、1 General15 6.1.2.2 TTCN ASN.1 Constraints .15 6.1.2.3 TTCN ASP Constraints.16 6.1.2.4 TTCN PDU Constraints 16 6.1.3 Dynamic part 16 6.1.3.1 General16 6.1.3.2 Test Case (TC) identifier.16 6.1.3.3 Test step identifier.16 6.1.3.4 Default identifier .16 6.2 Implementation conventions 16 6.2.1 Declarati

13、on part 16 6.2.2 Constraint part 17 6.2.3 Dynamic part 17 Annex A (normative): Abstract Test Suite (ATS) for MAC OBU.18 A.1 The TTCN Graphical form (TTCN.GR) 18 A.2 The TTCN Machine Processable form (TTCN.MP)18 A.3 Specification of PTC1 18 A.3.1 General requirements .18 ETSI ETSI TS 102 486-1-3 V1.1

14、.1 (2006-08) 4 A.3.2 Additional requirements .18 Annex B (normative): Abstract Test Suite (ATS) for MAC RSU20 B.1 The TTCN Graphical form (TTCN.GR) 20 B.2 The TTCN Machine Processable form (TTCN.MP)20 B.3 Specification of PTC1 20 B.3.1 General requirements .20 B.3.2 Additional requirements .20 Annex

15、 C (normative): Abstract Test Suite (ATS) for LLC OBU 21 C.1 The TTCN Graphical form (TTCN.GR) 21 C.2 The TTCN Machine Processable form (TTCN.MP)21 Annex D (normative): Abstract Test Suite (ATS) for LLC RSU.22 D.1 The TTCN Graphical form (TTCN.GR) 22 D.2 The TTCN Machine Processable form (TTCN.MP)22

16、 Annex E (normative): Partial PIXIT proforma for MAC OBU23 E.1 Identification summary.23 E.2 ATS summary 23 E.3 Test laboratory23 E.4 Client identification23 E.5 SUT 24 E.6 Protocol layer information24 E.6.1 Protocol identification 24 E.6.2 IUT information .24 Annex F (normative): Partial PIXIT prof

17、orma for MAC RSU.25 F.1 Identification summary.25 F.2 ATS summary 25 F.3 Test laboratory25 F.4 Client identification25 F.5 SUT 26 F.6 Protocol layer information26 F.6.1 Protocol identification 26 F.6.2 IUT information .26 Annex G (normative): Partial PIXIT proforma for LLC OBU .27 G.1 Identification

18、 summary.27 G.2 ATS summary 27 G.3 Test laboratory27 G.4 Client identification27 G.5 SUT 28 G.6 Protocol layer information28 G.6.1 Protocol identification 28 G.6.2 IUT information .29 ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 5 Annex H (normative): Partial PIXIT proforma for LLC RSU30 H.1 Identifica

19、tion summary.30 H.2 ATS summary 30 H.3 Test laboratory30 H.4 Client identification30 H.5 SUT 31 H.6 Protocol layer information31 H.6.1 Protocol identification 31 H.6.2 IUT information .32 Annex I (normative): PCTR Proforma for MAC OBU.33 I.1 Identification summary.33 I.1.1 Protocol conformance test

20、report33 I.1.2 IUT identification.33 I.1.3 Testing environment.33 I.1.4 Limits and reservation34 I.1.5 Comments.34 I.2 IUT Conformance status 34 I.3 Static conformance summary .34 I.4 Dynamic conformance summary34 I.5 Static conformance review report.35 I.6 Test campaign report36 I.7 Observations.36

21、 Annex J (normative): PCTR Proforma for MAC RSU .37 J.1 Identification summary.37 J.1.1 Protocol conformance test report37 J.1.2 IUT identification.37 J.1.3 Testing environment.37 J.1.4 Limits and reservation38 J.1.5 Comments.38 J.2 IUT Conformance status 38 J.3 Static conformance summary .38 J.4 Dy

22、namic conformance summary38 J.5 Static conformance review report.39 J.6 Test campaign report39 J.7 Observations.40 Annex K (normative): PCTR Proforma for LLC OBU41 K.1 Identification summary.41 K.1.1 Protocol conformance test report41 K.1.2 IUT identification.41 K.1.3 Testing environment.41 K.1.4 Li

23、mits and reservation42 K.1.5 Comments.42 K.2 IUT Conformance status 42 K.3 Static conformance summary .42 ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 6 K.4 Dynamic conformance summary42 K.5 Static conformance review report.43 K.6 Test campaign report44 K.7 Observations.44 Annex L (normative): PCTR Pro

24、forma for LLC RSU.45 L.1 Identification summary.45 L.1.1 Protocol conformance test report45 L.1.2 IUT identification.45 L.1.3 Testing environment.45 L.1.4 Limits and reservation46 L.1.5 Comments.46 L.2 IUT Conformance status 46 L.3 Static conformance summary .46 L.4 Dynamic conformance summary46 L.5

25、 Static conformance review report.47 L.6 Test campaign report47 L.7 Observations.47 Annex M (normative): Profile requirements for MAC OBU48 M.1 Generic test cases .48 M.2 Specific test cases.48 M.3 Non relevant test cases .48 M.4 Modified test campaign report .49 M.5 Observations.49 Annex N (normati

26、ve): Profile requirements for MAC RSU 50 N.1 Generic test cases .50 N.2 Specific test cases.50 N.3 Non relevant test cases .50 N.4 Modified test campaign report .51 N.5 Observations.51 Annex O (normative): Profile requirements for LLC OBU .52 O.1 Generic test cases .52 O.2 Specific test cases.52 O.3

27、 Non relevant test cases .52 O.4 Modified test campaign report .52 O.5 Observations.53 Annex P (normative): Profile requirements for LLC RSU54 P.1 Generic test cases .54 P.2 Specific test cases.54 P.3 Non relevant test cases .54 ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 7 P.4 Modified test campaign

28、report .54 P.5 Observations.55 Annex Q (informative): Bibliography.56 History 57 ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs

29、, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are avai

30、lable on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web se

31、rver) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 1, sub-part 3 of a multi-part deliverabl

32、e covering Road Transport and Traffic Telematics (RTTT); test specifications for Dedicated Short Range Communication (DSRC) transmission equipment, as identified below: Part 1: “DRSC datalink layer: medium access and Logical link control“:Sub-part 1: “Protocol Implementation Conformance Statement (P

33、ICS) proforma specification“; Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“. Part 2: “DSRC application layer“. ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 9 1 Scope The present document contains the Abstract Test Suite (ATS)

34、 and partial PIXIT proforma to test the ERM/TG37 Dedicated Short Range Communication (DSRC); Data Link Control (DLC) layer. The objective of the present document is to provide a basis for conformance tests for DSRC equipment giving a high probability of inter-operability between different manufactur

35、ers equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 4, ISO/IEC 9646-2 5 and ISO/IEC 9646-3 6) as well as the ETSI rules for conformance testing (ETS 300 406 3) are used as a basis for the test methodology. 2 References The following documents contain provisions

36、 which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference

37、, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 CEN EN 12795 (2003): “Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link laye

38、r: medium access and logical link control“. 2 CEN EN 13372 (2003): “Road transport and traffic telematics (RTTT) - Dedicated short-range communication - Profiles for RTTT“. 3 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Stan

39、dardization methodology“. 4 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 5 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - P

40、art 2: Abstract Test Suite Specification“. 6 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. 7 ISO/IEC 9646-5: “Information technology - Open Systems Interconnection - Con

41、formance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the Conformance Assessment process“. 8 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol Profile Test Specifi

42、cation“. 9 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance statement“. 10 CEN EN 12253 (2003): “Road transport and traffic telematics - Dedicated short-range communication - Physical layer usi

43、ng microwave at 5,8 GHz“. ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 103 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 4, EN 12253 10, EN 12795 1 and EN 13372 2 apply. 3.2 Abbreviations For the purposes of the

44、 present document, the abbreviations given in ISO/IEC 9646-1 4, ISO/IEC 9646-6 8, ISO/IEC 9646-7 9, EN 12795 1, EN 13372 2 and the following apply: ASN.1 Abstract Syntax Notation 1 ASP Abstract Service PrimitiveATM Abstract Test Method ATS Abstract Test Suite BI Invalid BehaviourBST Beacon Service T

45、able BV Valid Behaviour CM Co-ordination Message CP Co-ordination Point DLC Data Link Control DSRC Dedicated Short Range Communication FCS Frame Check Sequence IUT Implementation Under Test IUT Implementation Under Test LID Link IDentifier LLC Logical Link Control MAC Medium Access Control MTC Maste

46、r Test Component OBU On Board Unit PCO Point of Control and Observation PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement PrWA MAC frame Private Window Allocation PrWRq MAC frame Private Window Request RSU Road Side Unit SAP Service Access Point SUT System Under Test TC Test

47、Case TSS Test Suite Structure TTCN Tree and Tabular Combined Notation UT Upper Tester VST Vehicle Service Table ETSI ETSI TS 102 486-1-3 V1.1.1 (2006-08) 114 Abstract Test Method (ATM) 4.1 DSRC MAC layer Abstract Test Method (ATM) for OBU This clause describes the ATM used to test the DSRC MAC layer

48、 at the OBU side. 4.1.1 Test architecture Figure 1: Test architecture for OBU DSRC MAC layer A parallel testing concept is used, which consists of the following abstract testing parts: Tester: A test machine that is running a TTCN engine allowing parallel testing and having a standard DSRC Physical

49、layer. SUT: System under test MTC: Master test component used to perform the test, and start/stop/configure the Lower MAC Emulation Parallel Test Component. MAC: A standard DSRC MAC layer to be tested. Lower_MAC_SAP: Interface between the Lower MAC emulation and MTC. MAC frames, minus their FCS and flags, are passed via this SAP. In addition, specific frame timing information is passed upwards on this SAP. Lower MAC emulation: A DSRC MAC emulation performing some additional functions needed for covering the test purpose