ETSI TS 102 486-1-1-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf

《ETSI TS 102 486-1-1-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 486-1-1-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range C.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 486-1-1 V1.1.1 (2006-03)Technical Specification Electromagnetic compatibility and Radio spectrum Matters (ERM);Road Transport and Traffic Telematics (RTTT);Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment;Part 1: DSRC data link layer: medium acce

2、ss and logical link control;Sub-Part 1: Protocol Implementation Conformance Statement (PICS) proforma specificationETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 2 Reference DTS/ERM-TG37-001-1 Keywords DSRC, MAC, LLC, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.:

3、 +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made av

4、ailable in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on

5、 a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find

6、 errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction

7、in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3G

8、PPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 3 Contents Intellectual Property Rights6 Foreword.6 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations

9、.8 4 Overview of the templates8 5 Conformance requirement concerning PICS8 Annex A (normative): PICS proforma for DSRC data link layer for OBU .9 A.1 Guidance for completing the PICS proforma.9 A.1.1 Purposes and structure9 A.1.2 Abbreviations and conventions 9 A.1.3 Instructions for completing the

10、PICS proforma11 A.2 Identification of the implementation 11 A.2.1 Date of the statement11 A.2.2 Implementation Under Test (IUT) identification .11 A.2.3 System Under Test (SUT) identification12 A.2.4 Product supplier12 A.2.5 Client (if different from product supplier)12 A.2.6 PICS contact person .13

11、 A.3 Identification of the protocol13 A.4 Global statement of conformance.14 A.5 Services and Service Access Points .14 A.5.1 Services 14 A.5.2 Communication Direction 14 A.5.2 Service Access Points.14 A.6 MAC Data Service .15 A.6.1 MAC Frame format15 A.6.2 MAC window size and timing15 A.6.3 Protoco

12、l procedures16 A.7 LLC Data Service.16 A.7.1 LLC Service Modes16 A.7.2 LLC Control and Status Field.16 A.7.3 LLC Unacknowledged Services .16 A.7.3.1 Protocol procedures 16 A.7.3.2 PDUs.17 A.7.4 LLC Acknowledged Services.17 A.7.4.1 Protocol procedures 17 A.7.4.2 PDUs.17 Annex B (normative): PICS prof

13、orma for DSRC data link layer for RSU 19 B.1 Guidance for completing the PICS proforma.19 B.1.1 Purposes and structure19 B.1.2 Abbreviations and conventions 19 B.1.3 Instructions for completing the PICS proforma21 B.2 Identification of the implementation 21 ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03)

14、4 B.2.1 Date of the statement21 B.2.2 Implementation Under Test (IUT) identification .21 B.2.3 System Under Test (SUT) identification22 B.2.4 Product supplier22 B.2.5 Client (if different from product supplier)22 B.2.6 PICS contact person .23 B.3 Identification of the protocol23 B.4 Global statement

15、 of conformance.24 B.5 Global Roles.24 B.5.1 Services 24 B.5.2 Communication Direction 24 B.5.3 Service Access Points.24 B.6 MAC Data Services25 B.6.1 MAC Frame format25 B.6.2 MAC window size and timing25 B.6.3 Protocol procedures26 B.7 LLC Data Service.26 B.7.1 LLC Service Modes26 B.7.2 LLC Control

16、 and Status Field.26 B.7.3 LLC Unacknowledged Services .26 B.7.3.1 Protocol procedures 26 B.7.3.2 PDUs.27 B.7.4 LLC Acknowledged Services.27 B.7.4.1 Protocol procedures 27 B.7.5 PDUs 27 Annex C (normative): Profile Requirement List for RTTT applications profile of DSRC data link layer for OBU.29 C.1

17、 General .29 C.1.1 Profile Requirement List (profile RL)29 C.2 Identification of the profile.29 C.3 Tables for Services and Service Access Points 30 C.3.1 Communication Direction 30 C.4 Tables for LLC Data Service30 Annex D (normative): Profile Requirement List for RTTT applications profile of DSRC

18、data link layer for RSU .31 D.1 General .31 D.1.1 Profile Requirement List (profile RL)31 D.2 Identification of the profile.31 D.3 Global Roles.32 D.3.1 Communication Direction 32 D.4 LLC Data Service.32 Annex E (normative): Profile specific ICS proforma for RTTT applications profile of DSRC data li

19、nk layer for OBU.33 E.1 Guidance for completing the profile ICS proforma .33 E.1.1 Purposes and structure33 E.1.2 Abbreviations and conventions 33 E.1.3 Instructions for completing the profile ICS proforma 35 E.2 Identification of the implementation 35 E.2.1 Date of the statement35 ETSI ETSI TS 102

20、486-1-1 V1.1.1 (2006-03) 5 E.2.2 Implementation Under Test (IUT) identification .35 E.2.3 System Under Test (SUT) identification35 E.2.4 Product supplier36 E.2.5 Client (if different from product supplier)36 E.2.6 Profile ICS contact person37 E.3 Identification of the profile.37 E.4 Global statement

21、 of conformance.37 E.5 MAC Data Services38 E.5.1 Protocol procedures38 E.5.2 MAC Control Field 38 E.6 LLC Data Service.38 E.6.1 LLC Acknowledged Services.38 E.6.1.1 LLC Status Field.38 E.6.1.2 Protocol procedures 38 Annex F (normative): Profile specific ICS proforma for RTTT applications profile of

22、DSRC data link layer for RSU .39 F.1 Guidance for completing the profile ICS proforma .39 F.1.1 Purposes and structure39 F.1.2 Abbreviations and conventions 39 F.1.3 Instructions for completing the profile ICS proforma 41 F.2 Identification of the implementation 41 F.2.1 Date of the statement41 F.2.

23、2 Implementation Under Test (IUT) identification .41 F.2.3 System Under Test (SUT) identification42 F.2.4 Product supplier42 F.2.5 Client (if different from product supplier)42 F.2.6 Profile ICS contact person43 F.3 Identification of the profile.43 F.4 Global statement of conformance.44 F.5 MAC Data

24、 Services44 F.5.1 MAC Control Field 44 F.6 LLC Data Service.44 F.6.1 LLC Acknowledged Services.44 F.6.1.1 LLC Status Field.44 F.6.1.2 Protocol procedures 44 History 45 ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 6 Intellectual Property Rights IPRs essential or potentially essential to the present docu

25、ment may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of

26、 ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the exist

27、ence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectr

28、um Matters (ERM). The present document is part 1, sub-part 1 of a multi-part deliverable covering the test specifications for CEN DSRC, as identified below: Part 1: “DSRC data link layer: medium access and logical link control“; Sub-part 1: “Protocol Implementation Conformance Statement (PICS) profo

29、rma specification“; Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“; Part 2: “DSRC application layer“. ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 7 1 Scope The present document specifies partial Protocol Implementation Confor

30、mance Statement (PICS) proformas for the MAC and LLC layers of CEN DSRC as defined in EN 12795 1, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ETS 300 406 5. This proforma is intended for use by suppliers of equipment which

31、is claimed to conform to the CEN DSRC data link layer, as specified in EN 12795 1. The present document also contains profile Implementation Conformance Statement (ICS) proformas and profile Requirements Lists for the MAC and LLC layers for use by suppliers of equipment which is claimed to conform t

32、o EN 13372 2, DSRC Profiles for RTTT applications. To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance State

33、ment (ICS). The present document provides proforma ICS templates, to be filled in by equipment suppliers. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date o

34、f publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at

35、http:/docbox.etsi.org/Reference. 1 CEN EN 12795 (2003): “Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link layer. Medium access and logical link control“. 2 CEN EN 13372 (2004): “Road Transport and Traffic Telematics (RTTT) - Dedicated short-range co

36、mmunication - Profiles for RTTT applications“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concept“. 4 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodolo

37、gy and framework - Part 7: Implementation Conformance Statements“. 5 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 8 3 Definitions and abbreviations 3.1

38、Definitions For the purposes of the present document, the terms and definitions given in EN 12795 1, EN 13372 2, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to

39、 a given specification, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes

40、 an ICS 3.2 Abbreviations For the purposes of the present document, the abbreviations given in EN 12795 1, EN 13372 2, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: DSRC Dedicated Short Range Communication FCS Frame Check Sequence ICS Implementation Conformance Statement IUT Implementa

41、tion Under Test LLC Logical Link Control MAC Medium Access Control OBU On Board Unit, an alternative descriptor to Mobile Equipment PICS Protocol Implementation Conformance Statement RL Requirements List RSU Road Side Unit, an alternative descriptor to Fixed Equipment RTTT Road Transport and Traffic

42、 Telematics SUT System Under Test 4 Overview of the templates The present document contains separate PICS templates for On Board Unit (OBU) and Road Side Unit (RSU), for each of MAC and LLC layers. In addition, the present document contains profile Requirements Lists (RL) and profile-specific ICS pr

43、oformas for equipment claimed to conform to EN 13372 2. Again, these exist for the OBU and for the RSU, for each of MAC and LLC layers. 5 Conformance requirement concerning PICS If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technical

44、ly equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. An ICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the instructions for completion given at the sta

45、rt of each annex. ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 9 Annex A (normative): PICS proforma for DSRC data link layer for OBU Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce th

46、e PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the PICS proforma A.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of

47、 the requirements defined in EN 12795 1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: guidance for completing the PICS proforma; identification of the implementation; identification

48、 of the protocol; global statement of conformance; PICS proforma tables: - Services and Service Access Points; - MAC Data Service; - LLC Data Service. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guid

49、elines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI ETSI TS 102 486-1-1 V1.1.1 (2006-03) 10Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional