ETSI TS 102 318-2004 Access and terminals (AT) Digital Broadband Access to the Public Telecommunications Network IP Multimedia Time Critical Services Protocol Implementation Confor_1.pdf

《ETSI TS 102 318-2004 Access and terminals (AT) Digital Broadband Access to the Public Telecommunications Network IP Multimedia Time Critical Services Protocol Implementation Confor_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 318-2004 Access and terminals (AT) Digital Broadband Access to the Public Telecommunications Network IP Multimedia Time Critical Services Protocol Implementation Confor_1.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 318 V1.1.1 (2004-03)Technical Specification Access and terminals (AT);Digital Broadband Access to thePublic Telecommunications Network;IP Multimedia Time Critical Services;Protocol Implementation Conformance Statement (PICS);Internet Protocol Access Terminal - Line Control SignallingETS

2、I ETSI TS 102 318 V1.1.1 (2004-03) 2 Reference DTS/AT-020020-26-02 Keywords Access, broadband, cable, IP, multimedia, PSTN IPCable, PICS, terminal, testing, VoIP ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 000

3、17 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any c

4、ase of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi

6、.org Copyright Notification Reproduction is only permitted for the purpose of standardization work undertaken within ETSI. The copyright and the foregoing restrictions extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM

7、and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partner

8、s. ETSI ETSI TS 102 318 V1.1.1 (2004-03) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 4 1 Scope 5 2 References 5 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Overview 8 5 Conformance to this PICS proforma specification.8 Annex A (normative): PICS prof

9、orma for ETSI TS 101 909 IPCablecom series specific to Internet Protocol Access Terminal.9 A.1 Guidance for completing the PICS proforma.9 A.1.1 Purposes and structure9 A.1.2 Abbreviations and conventions 9 A.1.3 Instructions for completing the PICS proforma11 A.2 Identification of the implementatio

10、n 11 A.2.1 Date of the statement11 A.2.2 Implementation Under Test (IUT) identification .11 A.2.3 System Under Test (SUT) identification11 A.2.4 Product supplier12 A.2.5 PICS contact person .12 A.3 PICS/System Conformance Statement (SCS) 13 A.4 Identification of the protocols to the interfaces on th

11、e IPAT .13 A.5 Global statement of conformance.14 A.6 General .14 A.7 Physical Interfaces15 A.8 V 5.2 Call Signalling Interfaces .16 A.9 Media Flow 17 A.10 V5 Mapping18 A.11 Dynamic Quality of Service.19 A.12 Security.22 A.13 Network-based call signalling protocol23 History 26 ETSI ETSI TS 102 318 V

12、1.1.1 (2004-03) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Int

13、ellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no inve

14、stigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Speci

15、fication (TS) has been produced by ETSI Technical Committee Access and Terminals (AT). Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statem

16、ent is called an Implementation Conformance Statement (ICS). ETSI ETSI TS 102 318 V1.1.1 (2004-03) 5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Network-based Call Signalling, Dynamic Quality of Service, Provisioning and Security pr

17、otocols together with the ETSI V5 mapping for the IPCablecom (packet-based multimedia communication) system defined in TS 101 909-4 2, TS 101 909-5 3, TS 101 909-6 4, TS 101 909-7 5, TS 101 909-8 6, TS 101 909-9 7, TS 101 909-11 8, TS 101 909-23 10, in compliance with the relevant requirements speci

18、fied in those specifications and in accordance with the relevant guidance given in ISO/IEC 9646-7 26. The supplier of a protocol implementation which is claimed to conform to is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide th

19、e information necessary to identify both the supplier and the implementation. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition

20、 number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Refere

21、nce. 1 ETSI EG 201 188: “Public Switched Telephone Network (PSTN); Network Termination Point (NTP) analogue interface; Specification of physical and electrical characteristics at a 2-wire analogue presented NTP for short to medium length loop applications“. 2 ETSI TS 101 909-4 (V1.2.2): “Digital Bro

22、adband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 4: Network Call Signalling Protocol“. 3 ETSI TS 101 909-5 (V1.1.1): “ Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critic

23、al Services; Part 5: Dynamic Quality of Service for the Provision of Real Time Services over Cable Television Networks using Cable Modems“. 4 ETSI TS 101 909-6 (V1.1.1): “Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical S

24、ervices; Part 6: Media Terminal Adapter (MTA) device provisioning“. 5 ETSI TS 101 909-7 (V1.1.1): “Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 7: MIB Framework“. 6 ETSI TS 101 909-8 (V1.1.1): “Access a

25、nd Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 8: Media Terminal Adapater (MTA) Management Information Base (MIB)“. 7 ETSI TS 101 909-9 (V1.1.1): “Access and Terminals (AT); Digital Broadband Cable Access to the

26、Public Telecommunications Network; IP Multimedia Time Critical Services; Part 9: Network Call Signalling (NCS) MIB Requirements“. 8 ETSI TS 101 909-11 (V1.2.1): “Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 11: Security“. ETSI ET

27、SI TS 102 318 V1.1.1 (2004-03) 6 9 ETSI TS 101 909-18 (V1.1.1): “Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 18: Embedded Media Terminal Adapter (E-MTA) offering Analogue Telephony Services for PSTN Terminals“. 10 ETSI TS 101 90

28、9-23 (V1.1.1): “Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 23: Internet Protocol Access Terminal - Line Control Signalling (IPAT - LCS)“. 11 ETSI ES 201 488: “Data-Over-Cable Service Interface Specifications; Radio Frequency In

29、terface Specification“. 12 ETSI ES 200 800: “Digital Video Broadcasting (DVB); DVB interaction channel for Cable TV distribution systems (CATV)“. 13 ETSI EN 300 166: “Transmission and Multiplexing (TM); Physical and electrical characteristics of hierarchical digital interfaces for equipment using th

30、e 2 048 kbit/s - based plesiochronous or synchronous digital hierarchies“. 14 ETSI ES 201 235-2: “Access and Terminals (AT); Specification of Dual-Tone Multi-Frequency (DTMF) Transmitters and Receivers; Part 2: Transmitters“. 15 ETSI EN 300 347-1: “V interfaces at the digital Local Exchange (LE); V5

31、.2 interface for the support of Access Network (AN); Part 1: V5.2 interface specification“. 16 ETSI EN 300 659-1: “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 1: On-h

32、ook data transmission“. 17 ETSI EN 300 659-2: “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 2: Off-hook data transmission“. 18 ETSI EN 300 659-3: “Access and Terminals

33、 (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 3: Data link message and parameter codings“. 19 IEEE 802.3: “Information Technology - Telecommunication they are a cohesive set of interwoven

34、specifications that jointly evolved to enable the IPCablecom implementations to interwork as a cohesive end-to-end system. They are entirely based on cable operator needs and requirements. Any changes made to one part have to be done in concert with work being done in other parts. These must be clos

35、ely coordinated to ensure the elements interface together properly. For all of the clauses of a given specification, there is a history of evolution and reasoning behind the development of PacketCable and subsequently IPCablecom.The present document relates to the set of base standards as defined in

36、 the TS 101 909 series, there is no single base standard that covers the requirements of the IPAT in its entirety. Figure 1 illustrates the set of TS 101 909 series base standards that have been referred to in order to evaluate an IPAT protocol implementation, for the purpose of developing the prese

37、nt document. 110100Base specificationsPICS Statements per specificationPt. 4 NCSPt. 5 DQoSPt. 23 IPAT-LCSFigure 1: Base specifications relevant to the IPAT 5 Conformance to this PICS proforma specification If it claims to conform to the present document, the actual PICS proforma to be filled in by a

38、 supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the guidance for com

39、pletion given in clause A.1. ETSI ETSI TS 102 318 V1.1.1 (2004-03) 9 Annex A (normative): PICS proforma for ETSI TS 101 909 IPCablecom series specific to Internet Protocol Access Terminal Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants

40、that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the PICS proforma A.1.1 Purposes and structure The purpose of this PICS proforma is to prov

41、ide a mechanism whereby a supplier of an implementation of the requirements defined in the ETSI IPCablecom TS 101 909 series may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: - guidance

42、 for completing the PICS proforma; - identification of the implementation; - identification of the protocol; - global statement of conformance; - V5 to NCS mapping implementation; - network-based call signalling protocol implementation; - dynamic quality of service implementation; - multimedia termi

43、nal adapter provisioning implementation; - management information base implementation; - implementation of security mechanisms. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO

44、/IEC 9646-7 26. Item column The item column contains a qualified number which identifies the item in the table. Item description column The item description column describes in free text each respective item (for example parameters, timers, etc.). It implicitly means “is supported by the implementat

45、ion?“.ETSI ETSI TS 102 318 V1.1.1 (2004-03) 10Status column The following notations, defined in ISO/IEC 9646-7 26, are used for the status column: M mandatory - the capability is required to be supported; O indicates an optional requirement in ETSI TS 101 909. However, only sending of the parameter/

46、message is optional. When the parameter/message is received an ETSI IPCablecom compliant E-MTA shall act upon the parameter/message in accordance with the procedures as described in the main body of the present document; N/A not applicable - in the given context, it is impossible to use the capabili

47、ty; X prohibited (excluded) - there is a requirement not to use this capability in the given context; Ot.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items in the table numbered t and the logic o

48、f their selection which is defined immediately following the table; Ct.i conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status in the table numbered t, expressi

49、on which is defined immediately following the table. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 26, are used for the support column: Y or y supported by the implementation; N or n not supported by the implementation; N/A, n/a or no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). It is also possible to provide a comment to an answer in the space