ETSI TS 102 254-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Message Centre Monitoring and Mailbox Identification supplement.pdf

《ETSI TS 102 254-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Message Centre Monitoring and Mailbox Identification supplement.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 254-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Message Centre Monitoring and Mailbox Identification supplement.pdf（65页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 254 V1.1.1 (2003-08)Technical Specification Private Integrated Services Network (PISN);Specification, functional model and information flows;Message Centre Monitoring andMailbox Identification supplementary serviceETSI ETSI TS 102 254 V1.1.1 (2003-08) 2 Reference DTS/ECMA-00229 Keywords

2、 PISN, stage 1, stage 2, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice

3、Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Do

4、cument Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on th

5、e current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and

6、 the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being reg

7、istered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 254 V1.1.1 (2003-08) 3 Contents Intellectual Property Rights7 Foreword.7 Brief History.7 1 Scope 8 2 Conformance 8 3 Refe

8、rences (normative) 8 4 Definitions9 4.1 External definitions 9 4.2 Other definitions.9 4.2.1 Address Header.9 4.2.2 Complete Information.9 4.2.3 Compressed Information.9 4.2.4 Deleted Messages .9 4.2.5 Mailbox.9 4.2.6 Message Centre (MC).10 4.2.7 Message Status10 4.2.8 Message Type .10 4.2.9 Message

9、 Waiting Signal (MWS) 10 4.2.10 New Message10 4.2.11 Originator10 4.2.12 Originator address.10 4.2.13 Retrieved Message10 4.2.14 Served User.10 5 List of acronyms.11 6 SS-MCM stage 1 specification.12 6.1 Description .12 6.1.1 General description.12 6.1.2 Qualifications on applicability to telecommun

10、ication services.12 6.2 Procedures 12 6.2.1 Provision/withdrawal12 6.2.2 Normal procedures12 6.2.2.1 Activation, deactivation and interrogation 12 6.2.2.2 Invocation and operation.13 6.2.2.2.1 Incoming New Message 13 6.2.2.2.2 Update of Message Centre Information.14 6.2.2.2.3 Update request from the

11、 Served User15 6.2.2.2.4 Mailbox - full indication15 6.2.3 Exceptional procedures.15 6.2.3.1 Activation, deactivation and interrogation 15 6.2.3.2 Invocation and operation.16 6.3 Interactions with other Supplementary Services/Additional Network Features.16 6.3.1 Calling Line Identification Presentat

12、ion (SS-CLIP) .16 6.3.2 Connected Line Identification Presentation (SS-COLP) 16 6.3.3 Calling/Connected Line Identification Restriction (SS-CLIR).16 6.3.4 Calling Name Identification Presentation (SS-CNIP).16 6.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) 16 6.3.6 Connected Name I

13、dentification Presentation (SS-CONP)16 6.3.7 Call Forwarding Unconditional (SS-CFU) .16 6.3.8 Call Forwarding Busy (SS-CFB)16 6.3.9 Call Forwarding No Reply (SS-CFNR)17 6.3.10 Path Replacement (ANF-PR)17 6.3.11 Call Transfer (SS-CT).17 ETSI ETSI TS 102 254 V1.1.1 (2003-08) 4 6.3.12 Call Deflection (

14、SS-CD).17 6.3.13 Completion of Calls to Busy Subscribers (SS-CCBS)17 6.3.14 Completion of Calls on No Reply (SS-CCNR).17 6.3.15 Call Offer (SS-CO) .17 6.3.16 Do Not Disturb (SS-DND) .17 6.3.17 Do Not Disturb Override (SS-DNDO)17 6.3.18 Call Intrusion (SS-CI).17 6.3.19 Advice of Charge (SS-AOC) 17 6.

15、3.20 Recall (SS-RE)17 6.3.21 Call Interception (SS-CINT).17 6.3.22 Transit Counter (ANF-TC) .17 6.3.23 Route Restriction Class (ANF-RRC)18 6.3.24 Message Waiting Indication (SS-MWI) .18 6.3.25 Wireless Terminal Location Registration (SS-WTLR).18 6.3.26 Wireless Terminal Incoming Call (SS-WTMI).18 6.

16、3.27 Wireless Terminal Outgoing Call (SS-WTMO) .18 6.3.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .18 6.3.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .18 6.3.30 Common Information (SS-CMN).18 6.3.31 Call Priority Interruption (Protection) (SS-CPI(P) 18 6.3.32 Private U

17、ser Mobility Incoming Call (ANF-PUMI).18 6.3.33 Private User Mobility Outgoing Call (ANF-PUMO)18 6.3.34 Private User Mobility Registration (SS-PUMR).18 6.3.35 Single Step Call Transfer (SS-SSCT) .18 6.3.36 Simple Dialog (SS-SD).19 6.3.37 Call Identification and Call Linkage (ANF-CIDL).19 6.3.38 Shor

18、t Message Service (SS-SMS) 19 6.3.39 Make Call Request (SS-MCR)19 6.3.40 Mailbox Identification (SS-MID) .19 6.4 Interworking considerations .19 6.5 Overall SDL .19 7 SS-MID stage 1 specification.22 7.1 Description .22 7.1.1 General description.22 7.1.2 Qualifications on applicability to telecommuni

19、cation services.22 7.2 Procedures 22 7.2.1 Provision / withdrawal 22 7.2.2 Normal procedures22 7.2.2.1 Activation, deactivation and interrogation 22 7.2.2.2 Invocation and operation.22 7.2.2.2.1 Identification .22 7.2.2.2.2 Authentication .22 7.2.3 Exceptional procedures.23 7.2.3.1 Activation, deact

20、ivation and interrogation 23 7.2.3.2 Invocation and operation.23 7.3 Interactions with other Supplementary Services / Additional Network Features.23 7.3.1 Calling Line Identification Presentation (SS-CLIP) .23 7.3.2 Connected Line Identification Presentation (SS-COLP) 23 7.3.3 Calling/Connected Line

21、 Identification Restriction (SS-CLIR).23 7.3.4 Calling Name Identification Presentation (SS-CNIP).23 7.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) 23 7.3.6 Connected Name Identification Presentation (SS-CONP)23 7.3.7 Call Forwarding Unconditional (SS-CFU) .23 7.3.8 Call Forwardin

22、g Busy (SS-CFB)24 7.3.9 Call Forwarding No Reply (SS-CFNR)24 7.3.10 Path Replacement (ANF-PR)24 7.3.11 Call Transfer (SS-CT).24 7.3.12 Call Deflection (SS-CD).24 7.3.13 Completion of Calls to Busy Subscribers (SS-CCBS)24 7.3.14 Completion of Calls on No Reply (SS-CCNR).24 7.3.15 Call Offer (SS-CO) .

23、24 ETSI ETSI TS 102 254 V1.1.1 (2003-08) 5 7.3.16 Do Not Disturb (SS-DND) .24 7.3.17 Do Not Disturb Override (SS-DNDO)24 7.3.18 Call Intrusion (SS-CI).24 7.3.19 Advice of Charge (SS-AOC) 24 7.3.20 Recall (SS-RE)24 7.3.21 Call Interception (SS-CINT).24 7.3.22 Transit Counter (ANF-TC) .25 7.3.23 Route

24、 Restriction Class (ANF-RRC)25 7.3.24 Message Waiting Indication (SS-MWI) .25 7.3.25 Wireless Terminal Location Registration (SS-WTLR).25 7.3.26 Wireless Terminal Incoming Call (SS-WTMI).25 7.3.27 Wireless Terminal Outgoing Call (SS-WTMO) .25 7.3.28 Wireless Terminal Authentication of a WTM User (SS

25、-WTAT) .25 7.3.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .25 7.3.30 Common Information (SS-CMN).25 7.3.31 Call Priority Interruption (Protection) (SS-CPI(P) 25 7.3.32 Private User Mobility Incoming Call (ANF-PUMI).25 7.3.33 Private User Mobility Outgoing Call (ANF-PUMO)25 7.3.34 Priv

26、ate User Mobility Registration (SS-PUMR).25 7.3.35 Single Step Call Transfer (SS-SSCT) .25 7.3.36 Simple Dialog (SS-SD).26 7.3.37 Call Identification and Call Linkage (ANF-CIDL).26 7.3.38 Short Message Service (SS-SMS) 26 7.3.39 Make Call Request (SS-MCR)26 7.3.40 Message Centre Monitoring (SS-MCM).

27、26 7.4 Interworking considerations .26 7.5 Overall SDL .26 8 SS-MCM stage 2 specification.28 8.1 Functional model28 8.1.1 Functional model description28 8.1.2 Description of Functional Entities 28 8.1.2.1 Message Centres control entity, FE128 8.1.2.2 Served Users control entity, FE228 8.1.2.3 Served

28、 User Agent, FE329 8.2 Information flows.29 8.2.1 Definition of information flows29 8.2.1.1 MCM_ServiceChange.29 8.2.1.2 MCM_Interrogate .30 8.2.1.3 MCM_NewMessage .30 8.2.1.4 MCM_NoNewMessage.31 8.2.1.5 MCM_UpdateInfo.31 8.2.1.6 MCM_UpdateReq.32 8.2.1.7 MCM_Mailbox_full33 8.2.3 Information flow seq

29、uences33 8.2.3.1 Service Change procedures of SS-MCM 34 8.2.3.2 Interrogation procedure of SS-MCM 34 8.2.3.3 Transmission of a NewMessage Indication.35 8.2.3.4 Transmission of a NoNewMessage Indication35 8.2.3.5 Transmission of Update Information 36 8.2.3.6 Transmission of an Update Request36 8.2.3.

30、7 Transmission of a Mailbox-full indication37 8.3 Functional Entity actions37 8.3.1 Functional Entity actions of FE1 37 8.3.2 Functional Entity actions of FE2 37 8.3.3 Functional Entity actions of FE3 38 8.4 Functional Entity behaviour .38 8.4.1 Behaviour of FE139 8.4.2 Behaviour of FE245 8.4.3 Beha

31、viour of FE351 8.5 Allocation of Functional Entities to physical equipment54 8.6 Interworking considerations .55 ETSI ETSI TS 102 254 V1.1.1 (2003-08) 6 9 SS-MID stage 2 specification.55 9.1 Functional model55 9.1.1 Functional model description55 9.1.2 Description of Functional Entities 55 9.1.2.1 M

32、essage Centres control entity, FE155 9.1.2.2 Served Users control entity, FE255 9.1.2.3 Served User Agent, FE356 9.2 Information flows.56 9.2.1 Definition of information flows56 9.2.1.1 MID_MailboxID .56 9.2.1.2 MID_MailboxAuth .56 9.2.2 Information flow sequences57 9.2.2.1 Mailbox identification.57

33、 9.2.2.2 Mailbox authentication58 9.3 Functional Entity actions58 9.3.1 Functional Entity actions of FE1 58 9.3.2 Functional Entity actions of FE2 58 9.3.3 Functional Entity actions of FE3 58 9.4 Functional Entity behaviour .58 9.4.1 Behaviour of FE159 9.4.2 Behaviour of FE261 9.4.3 Behaviour of FE3

34、63 9.5 Allocation of Functional Entities to physical equipment64 9.6 Interworking considerations .64 History 65 ETSI ETSI TS 102 254 V1.1.1 (2003-08) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertain

35、ing to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretari

36、at. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the

37、 updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). Brief History The present do

38、cument is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined

39、by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00229. The present document specifies the Message Centre Monitoring and Mailbox Identification supplementary service. SS-MCM is based on SS-MWI and includes its entire functionality. The interoperability with SS-MWI is guaranteed. Compar

40、ed to SS-MWI, SS-MCM offers an enhanced functionality for monitoring status changes of messages stored in the Served Users Mailbox as follows: individual activation and deactivation for the monitoring of messages of different Message Type(s) within the Mailbox as well as interrogation of the actual

41、SS-MCM configuration; retrieval of information about all messages (i.e. new and retrieved messages) in the mailbox independent of the Message Status; request of detailed updated information about messages stored in the mailbox at every time. The present document is based upon the practical experienc

42、e of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. ETSI ETSI TS 102 254 V1.1.1 (2003-08) 8 1 Scope The pres

43、ent document specifies supplementary service Message Centre Monitoring/Mailbox Identification (SS-MCM/MID), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ECMA-142 2. The supplementary service MC

44、M enables a Served User to get informed by a Message Centre about the status and status changes of messages stored in that Served Users Mailbox. The supplementary service MID enables a Message Centre to identify a specific mailbox of a Served User in case that the Served User has more than one Mailb

45、ox within the Message Centre. In addition SS-MID enables a Served User to authenticate himself/herself at a specific Mailbox located within the Message Centre. Service specifications are produced in three stages, according to the method described in ETS 300 387 1. The present document contains the s

46、tage 1 and stage 2 specifications of SS-MCM/MID. The stage 1 specification (see clauses 6 and 7) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (see clauses 8 and 9) specifies the functional entities involved in the supplementary service and the information

47、flows between them. 2 Conformance In order to conform to the present document, a stage 3 standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the supplementary service specified in the present document. This means that, to claim

48、conformance, a stage 3 standard is required to be adequate for the support of those aspects of clauses 6 and 7 (stage 1) and clauses 8 and 9 (stage 2) which are relevant to the interface or equipment to which the stage 3 standard applies. 3 References (normative) The following standards contain prov

49、isions which, through reference in this text, constitute provisions of the present document. All standards are subject to revision, and parties to agreements based on the present document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. 1 ETSI ETS 300 387: “Private Telecommunication Network