ETSI TS 101 823-4-1-2004 Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 Conformance testing for the Data Link Control (DLC) layer Part 4 Extension for Home Environment Sub-_1.pdf

《ETSI TS 101 823-4-1-2004 Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 Conformance testing for the Data Link Control (DLC) layer Part 4 Extension for Home Environment Sub-_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 101 823-4-1-2004 Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 Conformance testing for the Data Link Control (DLC) layer Part 4 Extension for Home Environment Sub-_1.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 101 823-4-1 V1.3.1 (2004-08)Technical Specification Broadband Radio Access Networks (BRAN);HIPERLAN Type 2;Conformance testing for the Data Link Control (DLC) layer;Part 4: Extension for Home Environment;Sub-part 1: Protocol Implementation Conformance Statement (PICS) proformaETSI ETSI TS 1

2、01 823-4-1 V1.3.1 (2004-08) 2 Reference RTS/BRAN-002T0B4-4-1 Keywords access, HIPERLAN, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la So

3、us-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between

4、such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be sub

5、ject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except

6、 as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM

7、and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 101 823-4-1 V1.3.1 (2004-08) 3 Contents Intellectual Property Rights5

8、Foreword.5 Introduction 5 1 Scope 6 2 References 6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .7 4 Conformance to this PICS proforma specification.7 Annex A (normative): Protocol ICS proforma for TS 101 761-4.8 A.1 Guidance for completing the proforma 8 A.1.1 Purposes and s

9、tructure8 A.1.2 Abbreviations and conventions 8 A.1.3 Instructions for completing the PICS proforma10 A.2 Identification of the implementation 10 A.2.1 Date of the statement10 A.2.2 Implementation Under Test (IUT) identification .10 A.2.3 System Under Test (SUT) identification11 A.2.4 Product suppli

10、er11 A.2.5 Client (if different from product supplier)11 A.2.6 PICS contact person .12 A.3 Identification of TS 101 761-4 .12 A.4 Global statement of conformance.13 A.5 PICS proforma for home extension of WT or CC13 A.5.1 Error control Protocol.13 A.5.1.1 Roles .13 A.5.1.2 Additional capability: FEC

11、 mode .14 A.5.1.2.1 FEC mode - transmitter capabilities14 A.5.1.2.2 FEC mode - receiver capabilities 14 A.5.1.2.3 FEC mode - logical channel for data flow 14 A.5.1.2.4 FEC mode - logical channel for control flow14 A.5.2 RLC protocol15 A.5.2.1 WT implementation 15 A.5.2.1.1 Additional RLC capabilitie

12、s15 A.5.2.1.2 Additional PDUs .15 A.5.2.2 CC implementation.17 A.5.2.2.1 Additional capabilities 17 A.5.2.2.2 Additional PDUs .17 A.5.2.3 Additional PDU parameters19 A.5.2.3.1 Power control in DM PDU parameters .19 A.5.2.3.2 Calibration PDU parameters .19 A.5.2.3.3 Link Quality Map PDU parameters.20

13、 A.5.2.3.4 PDU parameters for DiL multicast connections20 A.5.2.3.5 PDU parameters for CC responsibility handover23 A.5.2.3.6 PDU parameters for Authentication key management25 A.5.2.3.7 Other Home extension PDU parameters and their values .26 A.6 Timers.27 Annex B (informative): Bibliography.28 ETS

14、I ETSI TS 101 823-4-1 V1.3.1 (2004-08) 4 History 29 ETSI ETSI TS 101 823-4-1 V1.3.1 (2004-08) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly availab

15、le for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server

16、(http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

17、 become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Project Broadband Radio Access Networks (BRAN). The present document is part 4, sub-part 1 of a multi-part deliverable. Full details of the entire series can be found in part 1, sub-part

18、1 (see bibliography). Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. When such a statement is based on a protocol, it is called PICS. ETSI ETSI TS

19、101 823-4-1 V1.3.1 (2004-08) 6 1 Scope The present document provides the PICS proforma for BRAN HIPERLAN type 2 DLC layer, Extension for Home Environment as defined in TS 101 761-4 1 in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4

20、and ETS 300 406 2. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. Re

21、ferences are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly ava

22、ilable in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 101 761-4 (V1.3.2): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 4: Extension for Home Environment“. 2 ETSI ETS 300 406 (1995): “Methods for testing and Speci

23、fication (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Ope

24、n Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions defined in TS 101 761-4 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7

25、4 and the following apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile

26、specific ICS, information object ICS, etc. ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Profile ICS: ICS for an implementation or system claimed to conform to a given profile specification Protocol ICS (PICS): ICS for an

27、implementation or system claimed to conform to a given protocol specification Profile Requirement List (PRL): Requirement list for an implementation or system claimed to conform to a given profile specification ETSI ETSI TS 101 823-4-1 V1.3.1 (2004-08) 7 3.2 Abbreviations For the purposes of the pre

28、sent document, the following abbreviations apply: ACF Association Control Function DUCC DLC User Connection Control FEC Forward Error Correction ICS Implementation Conformance Statement IUT Implementation Under Test PICS Protocol Implementation Conformance Statement PRL Profile Requirement List RLC

29、Radio Link Control RRC Radio Resource Control SDU Sevice Data Unit SUT System Under Test WT Wireless Terminal 4 Conformance to this PICS proforma specification If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to t

30、he text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the guidance for completion given in clause A.1. ETSI ETSI TS 101

31、823-4-1 V1.3.1 (2004-08) 8 Annex A (normative): Protocol ICS proforma for TS 101 761-4 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it ca

32、n be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the proforma A.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 101 761-4 1 may

33、provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: - guidance for completing the PICS proforma; - identification of the implementation; - identification of TS 101 761-4 1; - global statement

34、 of conformance; - roles; - major capabilities; - PDUs; - PDU parameters. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a

35、number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7

36、4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capabi

37、lity in the given context. ETSI ETSI TS 101 823-4-1 V1.3.1 (2004-08) 9 o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately followin

38、g the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table. i irrelevant (out-of-scope)

39、- capability outside the scope of the reference specification. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ status above. Reference column The reference column makes reference to TS 101 761-4 1, except where exp

40、licitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A,

41、 n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile

42、and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers

43、 to a single profile and which takes the value TRUE if and only if that profile is to be used. EXAMPLE 1: ?3: IF prof1 THEN Y ELSE N NOTE 2: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no abil

44、ity to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - ra

45、nge of values: example: 5 20 - list of values: , , ., example: 2 ,4 ,6 ,8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH - list of named values: (), (), ., () example: reject(1), accept(2) - length: size ( ) example: size (1 8) ETSI ETSI TS 101 823-4-1 V1.3.1 (2004-08) 10Values supported col

46、umn The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) within the PICS proforma a

47、 unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.

48、), respectively. EXAMPLE 2: A.5/4 is the reference to the answer of item 4 in table 5 of annex A. EXAMPLE 3: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prere

49、quisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in clause A.1.2. However, the tables containing in “user role“ or “Mobile Terminal MT“