ETSI TS 101 594-1-2018 Core Network and Interoperability Testing (INT) Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test S.pdf

《ETSI TS 101 594-1-2018 Core Network and Interoperability Testing (INT) Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test S.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 101 594-1-2018 Core Network and Interoperability Testing (INT) Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test S.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 101 594-1 V6.1.1 (2018-06) Core Network and Interoperability Testing (INT); Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification (3GPP Release 12); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SP

2、ECIFICATION ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)2Reference RTS/INT-00152-1 Keywords conformance, ECT, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non luc

3、ratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the

4、present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific networ

5、k drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors

6、in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except

7、as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo a

8、re trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned

9、by the GSM Association. ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definition

10、s 6g33.2 Abbreviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 7g34.1.1 Purposes and structure 7g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 8g34.2 Identificatio

11、n of the implementation 9g34.2.0 Introduction. 9g34.2.1 Date of the statement 9g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g34.2.4 Product supplier 10g34.2.5 Client (if different from product supplier) 10g34.2.6 PICS contact person 11g34.3

12、Identification of the Protocol specification. 11g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role . 12g34.6.0 Introduction. 12g34.6.1 Major capabilities . 12g34.7 Network role . 12g34.7.0 Introduction. 12g34.7.1 Major capabilities . 13g34.7.2 Supplementary service capabilitie

13、s . 13g3History 14g3ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)4Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI memb

14、ers and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi

15、.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the

16、 present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark

17、 and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interop

18、erability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (

19、PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Explicit Communication Transfer (ECT) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.629 version 12.7.0 Release 12)“. 2 ETSI ETS 300 406 (10-

20、1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC

21、9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 ETSI TS 123 228 (V12.10.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMT

22、S); LTE; IP Multimedia Subsystem (IMS); Stage 2 (3GPP TS 23.228 version 12.10.0 Release 12)“. 6 ETSI TS 124 628 (V12.4.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Common Basic Communication procedures using IP Multimedia (

23、IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.628 version 12.4.0 Release 12)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version

24、applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)6Th

25、e following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TS 124 607: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Origi

26、nating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 Release 12)“. i.2 ETSI TS 124 610: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommu

27、nications System (UMTS); LTE; Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.610 Release 12)“. i.3 ETSI TS 124 605: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conf

28、erence (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.605 Release 12)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 629 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4

29、and the following apply: ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification,

30、 stating which capabilities have been implemented NOTE The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain ad

31、ditional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 629 1 and the following apply: AS Application Server CLIR Calling Line Identification Restriction ICS Implementation Conformance Statement IUT Implementation Under Test OIP Origin

32、ating Identification Presentation OIR Originating Identification Restriction PICS Protocol ICS SUT System Under Test 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be t

33、echnically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)7A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance w

34、ith the guidance for completion given in clause 4.1. The right to copy Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the application form for testing so that it can be used for i

35、ts intended purposes and may further publish the completed application form. 4.1 Guidance for completing the PICS pro forma 4.1.1 Purposes and structure The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 629

36、 1 may provide information about the implementation in a standardized manner. The ICS pro forma is subdivided into clauses for the following categories of information: guidance for completing the PICS pro forma; identification of the implementation; identification of the ; global statement of confor

37、mance; roles; user role; - major capabilities; network role; - major capabilities. 4.1.2 Abbreviations and conventions The ICS pro forma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column c

38、ontains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is the requirement or option supported by the implementation?“. ETSI ETSI TS 101 594-1 V6.1.1

39、 (2018-06)8Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capabil

40、ity. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which

41、is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the tabl

42、e. Reference column The reference column makes reference to ETSI TS 124 629 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support c

43、olumn: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS pro forma is completed in order to describe a multiple-profile support i

44、n a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments

45、provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. EXAMPLE: ?3: IF prof1 THEN Y ELSE N NOTE: As stated in ISO/IEC 9646-7 4, support for a received PDU requires

46、the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Prerequisite line A prerequisite line takes the form: Prerequisite:

47、 4.5.1/2 network role. A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. 4.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro f

48、orma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation described in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables c

49、ontaining in “network role“ clause shall only be completed for network implementations. ETSI ETSI TS 101 594-1 V6.1.1 (2018-06)9If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. 4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be fil