ETSI TS 101 086-2005 Digital cellular telecommunications system (Phase 2+) Subscriber Identity Module (SIM) test specification (3GPP TS 11 17 Version 8 2 0 Release 1999)《数字蜂窝通信系统(第.pdf

《ETSI TS 101 086-2005 Digital cellular telecommunications system (Phase 2+) Subscriber Identity Module (SIM) test specification (3GPP TS 11 17 Version 8 2 0 Release 1999)《数字蜂窝通信系统(第.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 101 086-2005 Digital cellular telecommunications system (Phase 2+) Subscriber Identity Module (SIM) test specification (3GPP TS 11 17 Version 8 2 0 Release 1999)《数字蜂窝通信系统(第.pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 101 086 V8.2.0 (2005-06)Technical Specification Digital cellular telecommunications system (Phase 2+);Subscriber Identity Module (SIM) test specification(3GPP TS 11.17 version 8.2.0 Release 1999)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 101 086 V8.2.0 (2005-06) 1 Reference RTS/TS

2、GC-061117v820 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of

3、 the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

4、 In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of

5、this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as a

6、uthorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand t

7、he TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 101 086 V8.2.0 (2005-06) 2 Intellectual Property Rights IPRs essential or p

8、otentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essent

9、ial, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. N

10、o guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partners

11、hip Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI ident

12、ities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 101 086 V8.2.0 (2005-06) 3 Contents Intellectual Property Rights2 Foreword.2 Foreword.9 1 Scope 10 2 References 10 2.1 Normative references .10 2.2 Informative references10 3 Definitions and abbreviations.11 3.1 Definiti

13、ons11 3.2 Abbreviations .11 4 Test environment11 4.1 Test equipment .11 4.1.1 ME simulator 11 4.1.2 Signal generation device.11 4.1.2.1 VCC 11 4.1.2.2 RST .12 4.1.2.3 CLK.12 4.1.2.4 IO 12 4.1.3 Precision force-inducing contacting device 12 4.1.4 Temperature controllable environment.12 4.1.5 Temperat

14、ure measuring device.12 4.1.6 Voltage measuring device.13 4.1.7 Precision measuring device.13 4.1.8 Current measuring device .13 4.1.9 Timing Measurements on contact IO13 4.2 IUT default conditions13 4.3 Default data formatting 13 4.4 Test definition and applicability.14 4.5 Test procedure14 4.6 Tes

15、t requirement.14 5 Test Group Hierarchy.14 5.1 Test groups under SIM .15 5.2 Test groups under PHY 15 5.3 Test groups under ELEC 16 5.4 Test groups under LOG16 5.5 Test groups under SEC.17 5.6 Test groups under FN .17 5.7 Test groups under CMD .17 5.8 Test groups under CEF.18 5.9 Test groups under A

16、PP.18 6 Test Procedure18 6.1 Physical characteristics.18 6.1.1 Format and layout .19 6.1.1.1 ID-1 SIM.19 6.1.1.1.1 Definition and applicability.19 6.1.1.1.2 Conformance requirement .19 6.1.1.1.3 Test purpose 19 6.1.1.1.4 Method of test19 6.1.1.2 Plug-in SIM.20 6.1.1.2.1 Definition and applicability.

17、20 6.1.1.2.2 Conformance requirement .20 6.1.1.2.3 Test purpose 20 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 4 6.1.1.2.4 Method of test20 6.1.2 Temperature range for card operation.21 6.1.2.1 Definition and applicability.21 6.1.2.2 Conformance requirement.21 6.1.2.3 Test purpose 21 6.1.2.4 Method of tes

18、t .21 6.1.3 Contacts 22 6.1.3.1 Definition and applicability.22 6.1.3.2 Conformance requirement.22 6.1.3.3 Test purpose 22 6.1.3.4 Method of test .22 6.2 Electronic signals and transmission protocols23 6.2.1 Supply voltage Vcc (contact C1) 23 6.2.1.1 Voltage limits23 6.2.1.1.1 Definition and applica

19、bility.23 6.2.1.1.2 Conformance requirement .23 6.2.1.1.3 Test purpose 23 6.2.1.1.4 Method of test23 6.2.1.2 Current limits 24 6.2.1.2.1 Definition and applicability.24 6.2.1.2.2 Conformance requirement .24 6.2.1.2.3 Test purpose 24 6.2.1.2.4 Method of test24 6.2.1.3 Idle current limits 25 6.2.1.3.1

20、 Definition and applicability.25 6.2.1.3.2 Conformance requirement .25 6.2.1.3.3 Test purpose 26 6.2.1.3.4 Method of test26 6.2.1.3.5 Test requirement26 6.2.1.4 Current limits at all frequencies 26 6.2.1.4.1 Definition and applicability.26 6.2.1.4.2 Conformance requirement .26 6.2.1.4.3 Test purpose

21、 26 6.2.1.4.4 Method of test27 6.2.1.5 Current limits in clk-stop-mode 27 6.2.1.5.1 Definition and applicability.27 6.2.1.5.2 Conformance requirement .27 6.2.1.5.3 Test purpose 27 6.2.1.5.4 Method of test27 6.2.2 Reset RST (contact C2) 28 6.2.2.1 Static operation .28 6.2.2.1.1 Definition and applica

22、bility.28 6.2.2.1.2 Conformance requirement .28 6.2.2.1.3 Test purpose 28 6.2.2.1.4 Method of test28 6.2.3 Clock CLK (contact C3) .29 6.2.3.1 Frequency and duty cycle29 6.2.3.1.1 Definition and applicability.29 6.2.3.1.2 Conformance requirement .29 6.2.3.1.3 Test purpose 30 6.2.3.1.4 Method of test3

23、0 6.2.3.2 Voltage and current.30 6.2.3.2.1 Definition and applicability.30 6.2.3.2.2 Conformance requirement .30 6.2.3.2.3 Test purpose 31 6.2.3.2.4 Method of test31 6.2.4 I/O (contact C7) 32 6.2.4.1 Voltage and current.32 6.2.4.1.1 Definition and applicability.32 6.2.4.1.2 Conformance requirement .

24、32 6.2.4.1.3 Test purpose 32 6.2.4.1.4 Method of test32 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 5 6.2.5 States.33 6.2.5.1 Definition and applicability.33 6.2.5.2 Conformance requirement.33 6.2.5.3 Test purpose 34 6.2.5.4 Method of test .34 6.2.6 Answer To Reset (ATR) .34 6.2.6.1 ATR content34 6.2.6.1.

25、1 Definition and applicability.34 6.2.6.1.2 Conformance requirement .34 6.2.6.1.3 Test purpose 35 6.2.6.1.4 Method of test35 6.2.6.2 PTS procedure.36 6.2.6.2.1 Definition and applicability.36 6.2.6.2.2 Conformance requirement .36 6.2.6.2.3 Test purpose 36 6.2.6.2.4 Method of test36 6.2.7 Major Capab

26、ilities 36 6.2.7.1 Definition and applicability.36 6.2.7.2 Conformance requirement.36 6.2.7.3 Test purpose 37 6.2.7.4 Method of test .37 6.2.7.5 Test requirement .37 6.3 Logical Model 37 6.3.1 File identifier 37 6.3.1.1 File-type identification37 6.3.1.1.1 Definition and applicability.37 6.3.1.1.2 C

27、onformance requirement .37 6.3.1.1.3 Test purpose 37 6.3.1.1.4 Method of test38 6.3.1.2 File ID assignments.38 6.3.1.2.1 Definition and applicability.38 6.3.1.2.2 Conformance requirement .38 6.3.1.2.3 Test purpose 38 6.3.1.2.4 Method of test38 6.3.1.2.5 Test requirement39 6.3.2 Dedicated files 39 6.

28、3.2.1 Definition and applicability.39 6.3.2.2 Conformance requirement.39 6.3.2.3 Test purpose 39 6.3.2.4 Method of test .39 6.3.3 Elementary files 39 6.3.3.1 Definition and applicability.39 6.3.3.2 Conformance requirement.40 6.3.3.3 Test purpose 40 6.3.3.4 Method of test .40 6.3.4 Methods for select

29、ing a file.41 6.3.4.1 Definition and applicability.41 6.3.4.2 Conformance requirement.41 6.3.4.3 Test purpose 41 6.3.4.4 Method of test .41 6.3.5 Reservation of file IDs42 6.3.5.1 Definition and applicability.42 6.3.5.2 Conformance requirement.42 6.3.5.3 Test purpose 43 6.3.5.4 Method of test .43 6.

30、4 Security features.43 6.4.1 Authentication and cipher key generation procedure43 6.4.2 File access conditions .43 6.4.2.1 Definition and applicability.43 6.4.2.2 Conformance requirement.44 6.4.2.3 Test purpose 44 6.4.2.4 Method of test .44 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 6 6.5 Description of

31、the functions .45 6.5.1 SELECT function .45 6.5.1.1 Definition and applicability.45 6.5.1.2 Conformance requirement.45 6.5.1.3 Test purpose 45 6.5.1.4 Method of test .45 6.5.2 STATUS function.47 6.5.2.1 Definition and applicability.47 6.5.2.2 Conformance requirement.47 6.5.2.3 Test purpose 48 6.5.2.

32、4 Method of test .48 6.5.3 READ BINARY function.49 6.5.3.1 Definition and applicability.49 6.5.3.2 Conformance requirement.49 6.5.3.3 Test purpose 49 6.5.3.4 Method of test .49 6.5.4 UPDATE BINARY function 50 6.5.4.1 Definition and applicability.50 6.5.4.2 Conformance requirement.50 6.5.4.3 Test pur

33、pose 50 6.5.4.4 Method of test .50 6.5.5 READ RECORD function 51 6.5.5.1 Definition and applicability.51 6.5.5.2 Conformance requirement.51 6.5.5.3 Test purpose 52 6.5.5.4 Method of test .52 6.5.6 UPDATE RECORD function .54 6.5.6.1 Definition and applicability.54 6.5.6.2 Conformance requirement.54 6

34、.5.6.3 Test purpose 55 6.5.6.4 Method of test .55 6.5.7 SEEK function59 6.5.7.1 Definition and applicability.59 6.5.7.2 Conformance requirement.59 6.5.7.3 Test purpose 59 6.5.7.4 Method of test .59 6.5.8 INCREASE function.61 6.5.8.1 Definition and applicability.61 6.5.8.2 Conformance requirement.61

35、6.5.8.3 Test purpose 62 6.5.8.4 Method of test .62 6.5.9 VERIFY CHV function 62 6.5.9.1 Definition and applicability.62 6.5.9.2 Conformance requirement.62 6.5.9.3 Test purpose 63 6.5.9.4 Method of test .63 6.5.10 CHANGE CHV function64 6.5.10.1 Definition and applicability.64 6.5.10.2 Conformance req

36、uirement.65 6.5.10.3 Test purpose 65 6.5.10.4 Method of test .65 6.5.11 DISABLE CHV function66 6.5.11.1 Definition and applicability.66 6.5.11.2 Conformance requirement.66 6.5.11.3 Test purpose 67 6.5.11.4 Method of test .67 6.5.12 ENABLE CHV function.68 6.5.12.1 Definition and applicability.68 6.5.

37、12.2 Conformance requirement.68 6.5.12.3 Test purpose 69 6.5.12.4 Method of test .69 6.5.13 UNBLOCK CHV function .70 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 7 6.5.13.1 Definition and applicability.70 6.5.13.2 Conformance requirement.70 6.5.13.3 Test purpose 71 6.5.13.4 Method of test .71 6.5.14 INVALI

38、DATE function72 6.5.14.1 Definition and applicability.72 6.5.14.2 Conformance requirement.72 6.5.14.3 Test purpose 73 6.5.14.4 Method of test .73 6.5.15 REHABILITATE function .74 6.5.15.1 Definition and applicability.74 6.5.15.2 Conformance requirement.74 6.5.15.3 Test purpose 74 6.5.15.4 Method of

39、test .74 6.5.16 RUN GSM ALGORITHM function .75 6.5.16.1 Definition and applicability.75 6.5.16.2 Conformance requirement.75 6.5.16.3 Test purpose 75 6.5.16.4 Method of test .75 6.5.17 SLEEP function 76 6.5.17.1 Definition and applicability.76 6.5.17.2 Conformance requirement.76 6.5.17.3 Test purpose

40、 76 6.5.17.4 Method of test .76 6.6 Description of the commands.76 6.6.1 Mapping principles .76 6.6.1.1 Definition and applicability.76 6.6.1.2 Conformance requirement.76 6.6.1.3 Test purpose 77 6.6.1.4 Method of test .77 6.6.2 Coding of the commands 78 6.6.2.1 SELECT command .78 6.6.2.2 STATUS comm

41、and.78 6.6.2.3 READ BINARY command.78 6.6.2.4 UPDATE BINARY command78 6.6.2.5 READ RECORD command78 6.6.2.6 UPDATE RECORD command .78 6.6.2.7 SEEK command78 6.6.2.8 INCREASE command 78 6.6.2.9 VERIFY CHV command 78 6.6.2.10 CHANGE CHV command78 6.6.2.11 DISABLE CHV command79 6.6.2.12 ENABLE CHV comm

42、and.79 6.6.2.13 UNBLOCK CHV command .79 6.6.2.14 INVALIDATE command79 6.6.2.15 REHABILITATE command .79 6.6.2.16 RUN GSM ALGORITHM command .79 6.6.2.17 SLEEP command 79 6.6.2.18 GET RESPONSE command .79 6.6.2.18.1 Definition and applicability.79 6.6.2.18.2 Conformance requirement .79 6.6.2.18.3 Test

43、 purpose 80 6.6.2.18.4 Method of test80 6.6.3 Definitions and coding80 6.6.3.1 Definition and applicability.80 6.6.3.2 Conformance requirement.80 6.6.3.3 Test purpose 80 6.6.3.4 Method of test .81 6.6.4 Status conditions returned by the SIM81 6.6.4.1 Coding of the status words81 6.6.4.1.1 Definition

44、 and applicability.81 6.6.4.1.2 Conformance requirement .81 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 8 6.6.4.1.3 Test purpose 81 6.6.4.1.4 Method of test82 6.6.4.2 Commands versus possible status responses.83 6.6.4.2.1 Definition and applicability.83 6.6.4.2.2 Conformance requirement .83 6.6.4.2.3 Test

45、 purpose 83 6.6.4.2.4 Method of test83 6.6.4.2.5 Test requirement83 6.7 Contents of the elementary files .83 6.7.1 Definition and applicability 84 6.7.2 Conformance requirement 84 6.7.3 Test purpose84 6.7.4 Method of test .84 6.8 Application Protocol.85 6.8.1 FDN Procedure .85 6.8.1.1 Definition and

46、 applicability.85 6.8.1.2 Conformance requirement.85 6.8.1.3 Test purpose 85 6.8.1.4 Method of test .85 Annex A (informative): Change history .88 History 89 ETSI ETSI TS 101 086 V8.2.0 (2005-06) 9 Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP)

47、. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version numbe

48、r as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, upda

49、tes, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 101 086 V8.2.0 (2005-06) 101 Scope The present document provides the Conformance Test Specification for the Subscriber Identity Module defined in GSM 11.11 1, GSM 11.12 8 and GSM 11.18 9. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.