ETSI TS 100 392-18-1-2015 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) and Direct Mode Operation (DMO) Part 18 Air interface optimized applications Sub-part 1 Location I.pdf

《ETSI TS 100 392-18-1-2015 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) and Direct Mode Operation (DMO) Part 18 Air interface optimized applications Sub-part 1 Location I.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 100 392-18-1-2015 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) and Direct Mode Operation (DMO) Part 18 Air interface optimized applications Sub-part 1 Location I.pdf（104页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 100 392-18-1 V1.7.1 (2015-03) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 18: Air interface optimized applications; Sub-part 1: Location Information Protocol (LIP) TECHNICAL SPECIFICATION ETSI ETSI TS 100 392-18-1 V1.7.1 (2015-03) 2 Referen

2、ce RTS/TCCE-03232 Keywords air interface, location, radio, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78

3、03/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pri

4、or written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the

6、following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the

7、PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETS

8、I registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 100 392-18-1 V1.7.1 (2015-03) 3 Conten

9、ts Intellectual Property Rights 8g3Foreword . 8g3Modal verbs terminology 9g31 Scope 10g32 References 10g32.1 Normative references . 10g32.2 Informative references 10g33 Definitions, symbols and abbreviations . 11g33.1 Definitions 11g33.2 Symbols 11g33.3 Abbreviations . 11g34 Location information pro

10、tocol 12g34.1 General . 12g34.2 Location information protocol system architecture 13g34.3 Location information protocol service description . 16g34.3.1 General on services . 16g34.3.2 Services available at the LIP-SAP 16g34.3.3 Service primitives at the LIP-SAP 17g34.3.4 Service primitive parameters

11、 at the LIP-SAP . 17g34.5.5 State description 17g35 Location information protocol description . 18g35.1 Description of information elements 18g35.1.1 General on accuracies and uncertainties . 18g35.1.2 Acknowledgement request 18g35.1.2a Backlog information elements 18g35.1.3 Basic parameters . 18g35

12、.1.4 Confidence level . 18g35.1.5 Direction of travel and direction of travel accuracy 18g35.1.6 Horizontal position and horizontal position accuracy . 19g35.1.7 Horizontal velocity and horizontal velocity accuracy . 19g35.1.8 Location altitude and location altitude accuracy . 19g35.1.9 Location inf

13、ormation destination 19g35.1.10 Location message reference 19g35.1.11 Location shape 20g35.1.12 Maximum information age . 20g35.1.13 Maximum reporting distance 20g35.1.14 Maximum reporting interval . 20g35.1.15 Maximum response time . 20g35.1.16 Minimum reporting interval 20g35.1.17 Reason for sendi

14、ng 20g35.1.18 Report type 20g35.1.19 Request priority 20g35.1.20 Requested/required . 21g35.1.21 Start time . 21g35.1.22 Stop time . 21g35.1.23 Terminal or location identification . 21g35.1.24 Trigger definition 22g35.1.25 Trigger type 22g35.1.26 Velocity type . 22g35.1.27 Vertical velocity and vert

15、ical velocity accuracy . 22g35.2 Information flows . 22g35.2.1 General on information flows . 22g35.2.2 Pre-programmed MS sending reports . 23g35.2.3 Pre-programmed MS sending reports and receiving acknowledgement . 23g3ETSI ETSI TS 100 392-18-1 V1.7.1 (2015-03) 4 5.2.4 MS receiving basic parameters

16、 . 24g35.2.5 MS receiving basic parameters and sending response 24g35.2.6 MS reporting basic parameters . 25g35.2.7 MS receiving immediate report request and sending response . 25g35.2.8 MS receiving immediate report request and asking acknowledgement 26g35.2.9 MS receiving trigger definitions and s

17、ending reports . 26g35.2.10 MS receiving trigger definitions and sending reports and asking acknowledgements 27g35.2.11 MS receiving trigger definitions and sending modification 27g35.2.12 MS receiving trigger definitions and rejecting triggers 28g35.2.13 MS receiving trigger definitions and sending

18、 reports to other location information destination 28g35.2.14 MS receiving trigger definitions via location server and sending reports to another location information destination . 29g35.2.15 Trigger removal 30g35.2.16 Trigger reporting . 30g35.2.17 Location reporting enabling 31g35.2.18 Location re

19、porting disabling . 31g35.2.19 Location reporting temporary control . 32g35.2.20 Backlog information flows . 33g35.2.21 Allocation of entities . 33g35.3 Procedures 34g35.3.1 Relations to flow charts 34g35.3.2 General on control messages 34g35.3.3 Accuracy control in control messages 34g35.3.4 Genera

20、l on location report sending . 35g35.3.5 General on location report reception . 35g35.3.6 MS sending unsolicited reports . 35g35.3.7 MS receiving basic parameters . 36g35.3.8 MS reporting basic parameters . 36g35.3.9 MS sending immediate reports . 36g35.3.10 MS sending immediate report request 36g35

21、.3.11 Triggered report request sending 36g35.3.12 MS receiving triggered reports requests . 37g35.3.13 MS sending triggered reports 37g35.3.14 MS receiving triggered reports . 38g35.3.15 Triggered report reception in location server 38g35.3.16 Trigger removal 38g35.3.17 Report trigger request . 38g3

22、5.3.18 Location report enable/disable request . 38g35.3.19 Trigger configuration request . 39g35.3.20 Trigger and report type interactions 39g35.3.21 Location message reference usage 40g35.3.22 Triggers for Lost and Regained ability to determine location. 40g35.3.23 Trigger for Ambience Listening ca

23、ll . 40g35.3.24 Temporary control of location reporting . 41g35.3.25 Track retrieval . 41g35.3.25.1 General on track retrieval 41g35.3.25.2 Backlog requesting entity actions . 42g35.3.25.3 MT or application actions . 42g35.3.25.3.1 Backlog location reporting 42g35.3.25.3.2 Backlog location report re

24、cording enabling and disabling 43g35.3.25.3.3 Backlog location report triggers 43g35.3.25.3.4 Result code usage 44g35.3.26 Trigger for call setup. 44g35.4 Management of time . 44g36 Location information protocol coding requirements 45g36.1 General on coding requirements . 45g36.2 Location informatio

25、n protocol PDU description tables 46g36.2.1 SHORT LOCATION REPORT PDU . 46g36.2.2 LONG LOCATION REPORT PDU . 46g36.2.3 LOCATION REPORT ACKNOWLEDGEMENT PDU 47g36.2.4 BASIC LOCATION PARAMETERS REQUEST PDU 47g3ETSI ETSI TS 100 392-18-1 V1.7.1 (2015-03) 5 6.2.5 BASIC LOCATION PARAMETERS RESPONSE PDU 48g

26、36.2.6 REPORT BASIC LOCATION PARAMETERS REQUEST PDU 48g36.2.7 REPORT BASIC LOCATION PARAMETERS RESPONSE PDU 49g36.2.8 ADD/MODIFY TRIGGER REQUEST PDU . 50g36.2.9 ADD/MODIFY TRIGGER RESPONSE PDU . 51g36.2.10 REMOVE TRIGGER REQUEST PDU . 52g36.2.11 REMOVE TRIGGER RESPONSE PDU . 52g36.2.12 REPORT TRIGGE

27、RS REQUEST PDU . 52g36.2.13 REPORT TRIGGER RESPONSE PDU . 53g36.2.14 LOCATION REPORTING ENABLE/DISABLE REQUEST PDU 54g36.2.15 LOCATION REPORTING ENABLE/DISABLE RESPONSE PDU 54g36.2.16 IMMEDIATE LOCATION REPORT REQUEST PDU 55g36.2.17 LOCATION REPORTING TEMPORARY CONTROL REQUEST PDU 56g36.2.18 LOCATIO

28、N REPORTING TEMPORARY CONTROL RESPONSE PDU 56g36.2.19 BACKLOG REQUEST PDU . 56g36.2.20 BACKLOG RESPONSE PDU . 57g36.2.21 Backlog PDUs 58g36.2.21.1 BACKLOG ADD/MODIFY TRIGGERS REQUEST PDU . 58g36.2.21.2 BACKLOG ADD/MODIFY TRIGGERS RESPONSE PDU . 59g36.2.21.3 BACKLOG CONFIGURATION REQUEST PDU 60g36.2.

29、21.4 BACKLOG CONFIGURATION RESPONSE PDU 60g36.2.21.5 BACKLOG REMOVE TRIGGERS REQUEST PDU . 60g36.2.21.6 BACKLOG REMOVE TRIGGERS RESPONSE PDU . 60g36.2.21.7 BACKLOG REPORT TRIGGERS REQUEST PDU . 61g36.2.21.8 BACKLOG REPORT TRIGGERS RESPONSE PDU . 61g36.2.21.9 BACKLOG RETRIEVAL REQUEST PDU 61g36.2.21.

30、10 BACKLOG RETRIEVAL RESPONSE PDU 62g36.3 Location information protocol PDU information elements 62g36.3.1 Acknowledgement request 62g36.3.2 Address or identification type . 62g36.3.3 Angle 63g36.3.4 Backlog information elements 63g36.3.4.1 Backlog continuation state 63g36.3.4.2 Backlog denominator

31、rule . 63g36.3.4.3 Backlog distance interval rule . 64g36.3.4.4 Backlog information available 64g36.3.4.5 Backlog retrieval action 64g36.3.4.6 Backlog retrieval rules 64g36.3.4.7 Backlog location reports present . 65g36.3.4.8 Backlog location reports requested . 65g36.3.4.9 Backlog order of processi

32、ng 65g36.3.4.10 Backlog PDU Type . 65g36.3.4.11 Backlog time frame rule 66g36.3.4.12 Backlog time interval rule . 66g36.3.4a Confidence level . 66g36.3.4b Default enable/disable lifetime . 66g36.3.5 Direction of travel . 66g36.3.6 Direction of travel extended 67g36.3.7 Direction of travel accuracy 6

33、7g36.3.8 Direction of travel and direction of travel accuracy 67g36.3.9 Direction of travel uncertainty 68g36.3.10 Extended user defined data . 68g36.3.11 External subscriber number 68g36.3.12 Half of major axis . 68g36.3.13 Half of minor axis . 68g36.3.14 Horizontal position accuracy 68g36.3.15 Hor

34、izontal position and horizontal position accuracy . 69g36.3.16 Horizontal position uncertainty. 69g36.3.17 Horizontal velocity . 69g36.3.18 Horizontal velocity accuracy 70g36.3.19 Horizontal velocity and horizontal velocity accuracy . 71g36.3.20 Horizontal velocity and vertical velocity 71g3ETSI ETS

35、I TS 100 392-18-1 V1.7.1 (2015-03) 6 6.3.21 Horizontal velocity and vertical velocity with uncertainty . 71g36.3.22 Horizontal velocity and vertical velocity with direction of travel extended and uncertainty 71g36.3.23 Horizontal velocity uncertainty. 72g36.3.24 Horizontal velocity with direction of

36、 travel extended . 72g36.3.25 Horizontal velocity with direction of travel extended and uncertainty . 72g36.3.26 Horizontal velocity with uncertainty 72g36.3.27 Inner radius . 73g36.3.28 IPv4 address 73g36.3.29 IPv6 address 73g36.3.30 Latitude . 73g36.3.31 Location altitude . 73g36.3.32 Location alt

37、itude accuracy 74g36.3.33 Location altitude and location altitude accuracy . 74g36.3.34 Location altitude uncertainty 74g36.3.35 Location arc 74g36.3.36 Location circle 75g36.3.37 Location circle with altitude . 75g36.3.38 Location circle with altitude and uncertainty 75g36.3.39 Location data 75g36.

38、3.40 Location ellipse . 76g36.3.41 Location ellipse with altitude 76g36.3.42 Location ellipse with altitude and uncertainty 76g36.3.43 Location information destination 77g36.3.44 Location message reference 77g36.3.45 Location point . 77g36.3.46 Location point and position error 77g36.3.47 Location p

39、oint with altitude 78g36.3.48 Location reporting enable flags 78g36.3.49 Location shape 78g36.3.50 Longitude 79g36.3.51 Maximum information age . 79g36.3.52 Maximum reporting distance 79g36.3.53 Maximum reporting interval . 80g36.3.54 Maximum response time . 80g36.3.54a Minimum detection interval 80

40、g36.3.55 Minimum reporting interval 81g36.3.56 MNI + SSI 81g36.3.57 MNI + SSI + external subscriber number . 81g36.3.58 Name of location . 81g36.3.59 Name server type 82g36.3.60 Outer radius 82g36.3.61 PDU type 82g36.3.62 PDU type extension 83g36.3.63 Position error 83g36.3.64 Reason for sending 84g

41、36.3.65 Report type 85g36.3.66 Requested or required . 85g36.3.67 Request priority 85g36.3.68 Result code 85g36.3.69 SDS type-1 value 87g36.3.70 SSI 87g36.3.71 SSI + external subscriber number . 87g36.3.72 Start angle . 87g36.3.73 Start time . 87g36.3.74 Status value . 88g36.3.75 Stop angle . 88g36.

42、3.76 Stop time . 88g36.3.76a Temporary control parameter definition . 88g36.3.76b Temporary control parameter type 89g36.3.76c Temporary control validity . 89g36.3.76d Temporary maximum reporting distance - relative . 89g36.3.76e Temporary maximum reporting distance - absolute . 90g3ETSI ETSI TS 100

43、 392-18-1 V1.7.1 (2015-03) 7 6.3.76f Temporary minimum reporting interval - absolute . 90g36.3.76g Temporary minimum reporting interval - relative 90g36.3.76h Temporary report type 90g36.3.77 Terminal or location identification . 90g36.3.78 Time elapsed . 91g36.3.79 Time of position 91g36.3.80 Time

44、data 91g36.3.81 Time type 92g36.3.82 Trigger definition (one-shot/recurring) . 92g36.3.83 Trigger removal 92g36.3.84 Trigger type (one-shot/recurring) . 93g36.3.85 Trigger type (recurring) 94g36.3.86 Type 5 element identifier 94g36.3.87 Type of additional data . 95g36.3.88 User defined data 95g36.3.

45、89 Velocity data . 95g36.3.90 Velocity type . 95g36.3.91 Vertical velocity 95g36.3.92 Vertical velocity accuracy 96g36.3.93 Vertical velocity and vertical velocity accuracy . 97g36.3.94 Vertical velocity uncertainty . 97g36.4 Type 5 information element description . 97g36.4.1 Type 5 information elem

46、ent definition . 97g36.4.2 Type 5 element length . 97g36.4.3 Type 5 element length extension 97g36.4.4 Type 5 information element 98g36.5 Geographical shape descriptions 98g37 Implementation requirements . 98g3Annex A (informative): Example of trigger priorities 99g3A.1 Trigger priority setting . 99

47、g3Annex B (informative): Use of location message reference 101g3B.1 Potential usage of location message reference . 101g3Annex C (informative): Change Requests 102g3History 104g3ETSI ETSI TS 100 392-18-1 V1.7.1 (2015-03) 8 Intellectual Property Rights IPRs essential or potentially essential to the p

48、resent document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

49、 respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee TETRA and Critical Communications