ETSI TR 125 963-2018 Universal Mobile Telecommunications System (UMTS) Feasibility study on interference cancellation for UTRA FDD User Equipment (UE) (V15 0 0 3GPP TR 25 963 versi.pdf

《ETSI TR 125 963-2018 Universal Mobile Telecommunications System (UMTS) Feasibility study on interference cancellation for UTRA FDD User Equipment (UE) (V15 0 0 3GPP TR 25 963 versi.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 125 963-2018 Universal Mobile Telecommunications System (UMTS) Feasibility study on interference cancellation for UTRA FDD User Equipment (UE) (V15 0 0 3GPP TR 25 963 versi.pdf（71页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 125 963 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Feasibility study on interference cancellation for UTRA FDD User Equipment (UE) (3GPP TR 25.963 version 15.0.0 Release 15) TECHNICAL REPORT ETSI ETSI TR 125 963 V15.0.0 (2018-07)13GPP TR 25.963 version 15.0.0 Relea

2、se 15Reference RTR/TSGR-0425963vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important noti

3、ce The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authoriza

4、tion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be a

5、ware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following

6、services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF versio

7、n shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM an

8、d LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TR 125 963 V15.0.0 (2018-07)23GPP TR 25.

9、963 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be

10、 found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IP

11、R Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks T

12、he present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of t

13、hose trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to techn

14、ical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryfor

15、m.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed

16、in ETSI deliverables except when used in direct citation. ETSI ETSI TR 125 963 V15.0.0 (2018-07)33GPP TR 25.963 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 7g32 References 7g33 Abbreviations . 10g34

17、Receiver methods . 10g34.1 Two-branch interference mitigation . 10g34.2 One-branch interference mitigation 12g35 Network scenarios 12g36 Interference modelling . 13g36.1 General . 13g36.2 Statistical measures 14g36.2 Interference profile based on median values 14g36.3 Interference profiles based on

18、weighted average throughput gain . 22g36.3.0 General 22g36.3.1 0 dB geometry . 23g36.3.2 -3 dB geometry . 23g36.4 Interference profiles based on field data . 24g36.5 Summary 25g37 Transmitted code/power characteristics . 26g37.0 General . 26g37.1 Transmitted code and power characteristic in case of

19、HSDPA 26g37.1.1 Common channels for serving and interfering cells . 26g37.1.2 Serving cell . 27g37.1.2.1 Transmitted code and power characteristics for HSDPA+R99 scenario . 27g37.1.2.2 Transmitted code and power characteristics for HSDPA-only scenario . 28g37.1.3 Interfering cells . 29g37.1.3.1 Tran

20、smitted code and power characteristics for HSDPA+R99 scenario . 29g37.1.3.2 Transmitted code and power characteristics for HSDPA-only scenario . 30g37.1.4 Model for the power control sequence generation 31g38 Link performance characterization . 31g38.0 General . 31g38.1 Overview . 31g38.2 Simulation

21、 results . 32g38.2.1 Types 2 and 2i - median DIP values . 32g38.2.2 Types 3 and 3i - median DIP values . 33g38.2.3 Weighted DIPS: geometries -3 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of sub

22、stance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction A study item for further improved minimum performance requirements for UMTS/HSDPA UE (FDD) was approved at the 3GPP RAN #3

23、0 meeting 1. This technical report summarizes the work that RAN4 has accomplished in this study item to assess the feasibility of both one-branch and two-branch interference cancellation/mitigation UE receivers. These receivers attempt to cancel the interference that arises from users operating outs

24、ide the serving cell. This type of interference is also referred to as other-cell interference. In past link level evaluations, this type of interference has been modelled as AWGN, and as such can not be cancelled. The study item has developed models for this interference in terms of the number of i

25、nterfering Node Bs to consider, and their powers relative to the total other cell interference power, the latter ratios referred to as Dominant Interferer Proportion (DIP) ratios. DIP ratios have been defined based on three criteria; median values of the corresponding cumulative density functions, w

26、eighted average throughput gain, and field data. In addition, two network scenarios are defined, one based solely on HSDPA traffic (HSDPA-only), and the other based on a mixture of HSDPA and Rel. 99 voice traffic (HSDPA+R99). Interference aware receivers, referred to as type 2i and type 3i, were def

27、ined as extensions of the existing type 2 and type 3 receivers, respectively. The basic receiver structure is that of an LMMSE sub-chip level equalizer which takes into account not only the channel response matrix of the serving cell, but also the channel response matrices of the most significant in

28、terfering cells. HSDPA throughput estimates are developed using link level simulations, which include the other-cell interference model plus OCNS models for the serving and interfering cells based on the two network scenarios considered. In addition, system level performance is assessed to determine

29、 the gains that interference cancellation/mitigation receiver might provide in throughput and coverage. Complexity issues associated with implementing these types of receivers are also discussed. The content of each specific clause of the report is briefly described as follows. Clause 1 of this docu

30、ment defines the scope and objectives of this feasibility study. Clause 4 describes the receiver methods that can be applied to one-branch and two-branch Interference Cancellation (IC) receivers. The reference receivers for the type 2i and type 3i are defined, both of which are based on LMMSE sub-ch

31、ip level equalizers with interference-aware capabilities. Clause 5 describes the two network scenarios that were defined and used to generate the interference statistics, which were then used to develop the interference models described in clause 6. Clause 6 defines the interference models/profiles

32、that were developed in order to assess the link level performance of IC receivers. The DIP ratio is defined as a key statistical measure, which forms the basis of the three types of interference profiles considered. ETSI ETSI TR 125 963 V15.0.0 (2018-07)63GPP TR 25.963 version 15.0.0 Release 15Claus

33、e 7 defines the code and power characteristics of the signals transmitted by the serving and interfering cells for the two network scenarios defined in clause 5. These latter definitions essentially define the signal characteristics of the desired user, the common channels and the OCNS for both serv

34、ing and interfering cells. Clause 8 summarizes the link level simulation results based on the assumptions developed in clauses 6 and 7, while clause 9 summarizes the system level performance characterization. Clause 10 discusses the possible receiver implementation losses for a two-branch, sub-chip

35、based LMMSE equalizer with interference aware capabilities. Finally, clause 11 provides the relevant conclusions that can be taken from this study. ETSI ETSI TR 125 963 V15.0.0 (2018-07)73GPP TR 25.963 version 15.0.0 Release 151 Scope The objective of this study is to evaluate the feasibility and po

36、tential performance improvements of interference cancellation/mitigation techniques for UTRA FDD UE receivers, based on realistic network scenarios. Scope of the work includes: - Determine realistic network scenarios. - Determine suitable interference models for other cell interference. - Evaluate t

37、he feasibility of two-branch interference cancellation receivers through link and system level analysis and simulations. - Evaluate feasibility of one-branch interference cancellation receivers through link and system level analysis and simulations. 2 References The following documents contain provi

38、sions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific

39、reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 RP-050764, “New Study Item Proposal: Further Improved Perf

40、ormance Requirements for UMTS/HSDPA UE“, Cingular Wireless, RAN #30. 2 R4-060514, “Reference structure for interference mitigation simulations with HSDPA and receiver diversity“, Nokia, RAN4 #39. 3 R4-060364, “Minutes of Ad Hoc on Further Improved Performance Requirements for UMTS/HSDPA UE (FDD)“, N

41、okia, RAN4 #38. 4 R4-060117, “Analysis for simulation scenario definition to interference mitigation studies“, Nokia, RAN4#38. 5 R4-060180, “Network Scenarios and Associated Interference Profiles for Evaluation of Generalized Interference Cancellation (IC) Receivers“, Cingular, RAN4 #38. 6 TR 25.848

42、 v4.0.0, “Physical layer aspects of UTRA High Speed Downlink Packet Access (Release 4)“. 7 TR 25.896 V6.0.0 (2004-3), “Feasibility Study for Enhanced Uplink for UTRA FDD (Release 6)“. 8 R4-060959, “Throughput simulation results for Type 3 and Type 3i receivers with shadow fading and realistic DIP va

43、lues for Ior/Ioc=0 dB“, InterDigital, RAN4 #40. 9 R4-061068, “Some observations on DIP values as a function of network geometries“, TensorComm, RAN4 #40. 10 R4-060512, “Analysis simulation results for scenario definition to interference mitigation studies“, Nokia, RAN4 #39. 11 R4-060391, “HSDPA Netw

44、ork Scenario and Associated Interference Profile for Evaluation of Generalized Interference Cancellation (IC) Receivers“, Cingular/AT Selection procedures for choice of radio transmission technologies of the UMTS (UMTS 30.03 version 3.2.0)“. 70 Globetrotter GT MAX 7.2 Ready Data Card from Option. 71

45、 R4-050728, “Simulation Assumptions for Rx Diversity + LMMSE Equalizer Enhanced HSDPA Receiver (Type 3), Qualcomm, RAN4 #36. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: DIP Dominant Interferer Proportion IC Interference Cancellation LMMSE Linear Minim

46、um Mean Squared Error UE User Equipment UTRA UMTS Terrestrial Radio Access 4 Receiver methods In this clause we give the system equations for the LMMSE chip-level equalizer with and without receive diversity for evaluating the benefits for interference mitigation 2. In the assumptions used in earlie

47、r work for enhanced performance requirements Type 2 and Type 3 the interference structure was assumed to be white and the variance to be ideally known. In the structure presented in following clauses the interference structure is now assumed to be colored and the covariance matrix is structured base

48、d on ideal knowledge of the channel matrices of the interfering base stations. This enables the evaluation of benefits of interference mitigation in the equalizer structure while the approach to derive (estimate) the interference covariance matrix does not need to be defined. 4.1 Two-branch interfer

49、ence mitigation The received signal is assumed to be expressed as a sum of “own“ signal, interfering signals and the white noise: noisewhitenoisecolouredNjjsignalownvectorsignalreceivedBSjndMdMr +=43421321100, (1)where ,.,0,BSNjj=M represents the channel matrix corresponding to BS j, containing the contribution from both receive antenna branches. The =HjHjj)()(21HHM where iH equals channel-matrix for the i-th receiver antenna. As a general concept, the equalizer consists of two FIR filters w1and w2of length FNs: 2,1,)1()2()