ETSI TR 103 245-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) System Reference document (SRdoc) Technical characteristics and spectrum requirements of widebanit.pdf

《ETSI TR 103 245-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) System Reference document (SRdoc) Technical characteristics and spectrum requirements of widebanit.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 103 245-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) System Reference document (SRdoc) Technical characteristics and spectrum requirements of widebanit.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 103 245 V1.1.1 (2014-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference document (SRdoc); Technical characteristics and spectrum requirements of wideband SRDs with advanced spectrum sharing capability for operation in the UHF 870 - 876 MHz and 915 - 921 MHz

2、 frequency bands TECHNICAL REPORT ETSI ETSI TR 103 245 V1.1.1 (2014-11) 2Reference DTR/ERM-TG28-511 Keywords AFA, CSMA, IoT, M2M, SRDoc ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association

3、 but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the prese

4、nt document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network dri

5、ve within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present

6、document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by writte

7、n permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTST

8、Mand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI

9、 TR 103 245 V1.1.1 (2014-11) 3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Comm

10、ents on the System Reference Document 8g34.1 Statements by ETSI Members 8g35 Executive summary 8g36 Market information. 9g37 Technical characteristics 9g37.1 Description of IEEE 802.11ah as an Example Technology for Wideband SRDs 10g37.1.1 IEEE 802.11ah PHY . 11g37.1.2 IEEE 802.11ah MAC 11g37.1.3 Tr

11、ansmitter and Receiver Specifications 12g37.1.3.1 Transmit power levels . 12g37.2 Advanced Spectrum Sharing Capabilities 14g37.2.1 PHY Layer CCA . 15g37.2.2 MAC Layer EDCA . 15g38 Justification of Spectrum Request 17g39 Regulations . 18g39.1 Overview of Current UHF 870 - 876 MHz and 915 - 921 MHz Sp

12、ectrum Regulations 18g39.1.1 Regulations for SRD-designated sub-bands in 863 - 870 MHz 19g39.1.2 Spectrum Access Techniques for SRDs 19g39.2 Limitations of Spectrum Regulations for Wideband SRDs 20g39.3 Proposed Changes and Benefits . 21g39.3.1 Detailed Changes to Regulatory Text . 22g310 Conclusion

13、s 24g3Annex A: Detailed Market Information . 25g3A.1 Overall Connected Devices Market . 25g3A.2 European Home and Building Automation Market 25g3A.3 Wearable Technologies Market 27g3History 29g3ETSI ETSI TR 103 245 V1.1.1 (2014-11) 4Intellectual Property Rights IPRs essential or potentially essentia

14、l to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified

15、to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the

16、existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum

17、 Matters (ERM). The present document includes necessary information to support the co-operation under the MoU between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Postal and Telecommunications Administrations (CEPT). Modal verbs terminology In the present docu

18、ment “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI d

19、eliverables except when used in direct citation. Introduction Wideband SRDs are a subset of the broader SRD family that can enable further market growth for divers applications including Internet of Things, Machine-to-Machine communications, smart home/building automation and wearables. This can be

20、achieved in particular through advanced characteristics of these devices such as higher data rates, improved power usage, and efficient spectrum utilization. Therefore, Wideband SRDs are expected to grow rapidly over the foreseeable future for mass market applications. Based on these expected growth

21、 rates and currently limited available frequency bands, there is an essential need for additional spectrum for Wideband SRDs to accommodate the anticipated market growth. The present document requests modifications to the regulatory rules of the UHF 870 - 876 MHz and 915 - 921 MHz frequency bands to

22、 enable the operation of Wideband SRDs with advanced spectrum sharing capabilities in these bands. ETSI ETSI TR 103 245 V1.1.1 (2014-11) 51 Scope The present document applies to the potential future usage of Wideband SRDs with advanced spectrum sharing capabilities in the UHF 870 - 876 MHz and 915 -

23、 921 MHz frequency bands. In particular, it: Gives an SRD market overview and explains the development and emergence of new Wideband SRD technologies. Describes technical characteristics of Wideband SRDs, including advanced spectrum sharing capabilities, as they relate to the usage of the UHF 870 -

24、876 MHz and 915 - 921 MHz spectrum. Details the requested regulatory changes to allow for efficient use of Wideband SRDs. The present document is intended to include all necessary information required by the Electronic Communications Committee (ECC) under the MoU between ETSI and the ECC. 2 Referenc

25、es References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Refer

26、enced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references T

27、he following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area.

28、i.1 CEPT ECC ERC Recommendation 70-03: “Relating to the Use of Short Range Devices (SRD)“, 07 February 2014. i.2 ABI Research, “Short Range Wireless and Cellular ICs Enabling the Connected World of Tomorrow“, July 2013 (PT-1027). i.3 ABI Research Report “Home Automation Systems“, May 5, 2014 (MD-HAS

29、-1047). i.4 IHS, “Wearable Technology - World“, October 2013. i.5 IEEE P802.11ah / Draft 2.0 June 2014. “Part II: Wireless LAN Medium Access Control (MAC) and Physical (PHY) Layer Specifications. Amendment 6: Sub 1 GHz License Exempt Operation“. i.6 ETSI EN 300 220-1 (V2.4.1) (2012-01): “Electromagn

30、etic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods“. ETSI ETSI TR 103 245 V1.1.1 (2014-11) 6i.7 ETSI EN 300 32

31、8 (V1.8.1) (2012-04): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R Net

32、work Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW“. i.9 CEPT ECC Report 200: “Co-existence studies for proposed SRD and RFID applications in the frequency band 870-876 MHz and 915-921 MHz“, September 2013

33、. i.10 CEPT ECC Report 189: “Future Spectrum Demand for Short Range Devices in the UHF Frequency Bands“. i.11 CEPT ECC Report 181: “Improving Spectrum Efficiency in the SRD Bands“, September 2012. i.12 ETSI TR 103 055 (V1.1.1) (2011-09): “Electromagnetic compatibility and Radio spectrum Matters (ERM

34、); System Reference document (SRdoc): Spectrum Requirements for Short Range Device, Metropolitan Mesh Machine Networks (M3N) and Smart Metering (SM) applications“. i.13 ETSI TR 102 649-2 (V1.3.1) (2012-08): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics of

35、 Short Range Devices (SRD) and RFID in the UHF Band; System Reference Document for Radio Frequency Identification (RFID) and SRD equipment; Part 2: Additional spectrum requirements for UHF RFID, non-specific SRDs and specific SRDs“. i.14 IEEE 802.11: “IEEE Standard for Information technology -Teleco

36、mmunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications“. i.15 IEEE 802.11n: “IEEE Standard for Information technology - Local and metropolitan area netw

37、orks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Higher Throughput“. i.16 IEEE 802.11ac: “IEEE Standard for Information technology - Telecommunications and information exchange between systems - Loca

38、l and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz“. i.17 ABI Research Report “Commercial Building Automation“, Ma

39、rch 19, 2013. (MD-CBA-102). 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: channel: small frequency sub-band within the operating frequency band into which a Radio Signal fits duty cycle: for the purposes of the ER

40、C Recommendation 70-03 i.1, the duty cycle is defined as the ratio, expressed as a percentage, of the maximum transmitter “on“ time on one carrier frequency, relative to a one hour period NOTE: For frequency agile devices the duty cycle limit applies to the total transmission. Listen Before Talk (LB

41、T): action taken by a device to detect an unoccupied channel prior to transmitting frequency agility: ability of a device to selectively change its frequency sub-band of operation within the larger operating frequency band ETSI ETSI TR 103 245 V1.1.1 (2014-11) 7Non-specific Short Range Devices (SRDs

42、): SRDs that do not necessarily fit under the specific applications outlined in ERC/REC 70-03 i.1, Annexes 2 to 13 Short Range Devices (SRDs): radio devices which provide either unidirectional or bi-directional communication and which have low capability of causing interference to other radio equipm

43、ent NOTE: SRDs use either integral, dedicated or external antennas and all modes of modulation can be permitted subject to relevant standards. SRDs are normally “license exempt“. Specific Short Range Devices (SRDs): SRDs that are used in specific applications (e.g. Applications of ERC/REC 70-03 i.1,

44、 Annexes 2 to 13) Wideband SRDs: SRD devices that use wideband modulation techniques with channel bandwidths larger than 600 kHz (which current regulations for UHF 870 - 876 MHz and 915 - 921 MHz already specify) and up to 1 MHz NOTE: This definition is for the purpose of notational simplicity and c

45、larity in the context of drafting the present document and does not claim a consensus on global definition for Wideband SRDs. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Access Category ACK AcknowledgementAFA Adaptive Frequency Agility/Autonomous

46、 Frequency Assignment AP Acces-Point BPSK Binary Phase Shift Keying BSS Basic Service Set CA Collision AvoidanceCAGR Compound Annual Growth Rate CCA Clear Channel Assessment CEPT Commission Europenne des Postes et Tlcommunications CSMA Carrier Sense Multiple Access CW Contention Window DCF Distribut

47、ed Coordination Function DIFS DCF Interframe Spacing DSSS Direct Sequence Spread Spectrum e.r.p/e.i.r.p. effective radiated power/effective isotropic radiated power ECC Electronic Communications Committee of the CEPT EDCA Enhanced Distributed Channel Access ER-GSM Extended Railways GSM FFT Fast Four

48、ier Transform FHSS Frequency Hopping Spread Spectrum GSM-R Global System for Mobile communication for Railway application HVAC Heating, Ventilation and Air Conditioning IoT Internet of Things IP Internet Protocol ISM Industrial Scientific and Medical LBT Listen-Before-Talk M2M Machine-to-Machine com

49、munication MAC Medium Access Layer OBSS Other Basic Service Set OFDM Orthogonal Frequency Division Multiplexing PER Packet Error Rate PHY Physical LayerPSD Power Spectral Density QAM Quadrature Amplitude Modulation QPSK Quadrature Phase Shift Keying RAW Restricted Access Window RFID Radio Frequency Identification SIFS Short Interframe Spacing SRD Short-Range Device ETSI ETSI TR 103 245 V1.1.1 (2014-11) 8SST Sub-band Selective Transmission STA Station TWT Target Wake Time TXOP Transmit OpportunityUHF Ultra-High Frequenc