ETSI TR 102 400-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Intelligent Transport Systems (ITS) Road Traffic and Transport Telemat_1.pdf

《ETSI TR 102 400-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Intelligent Transport Systems (ITS) Road Traffic and Transport Telemat_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 102 400-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Intelligent Transport Systems (ITS) Road Traffic and Transport Telemat_1.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 102 400 V1.2.1 (2006-07)Technical Report Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Intelligent Transport Systems (ITS);Road Traffic and Transport Telematics (RTTT);Technical characteristics for communications equipmentin the frequency band from

2、63 GHz to 64 GHz;System Reference DocumentETSI ETSI TR 102 400 V1.2.1 (2006-07) 2 Reference RTR/ERM-RM-050 Keywords CALM, EHF, radio, RTTT, short range, SRD, SRDoc ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 0

3、0017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any

4、 case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the

5、 present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to on

6、e of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2

7、006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its

8、Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 400 V1.2.1 (2006-07) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 4 1 Scope 5 2 References 5 3 Definitions, symbols and abbreviations .6 3.1 Definitions6 3.2 Symbols6 3.3 Abbreviations .6 4 Executive summary 7 4.1

9、Status of the system reference document .7 4.2 Market information.8 4.3 Technical system description .8 5 Current regulations.8 6 Proposed regulations 9 7 Main conclusions9 8 Expected ECC actions9 Annex A: Market information 10 A.1 Applications .10 A.1.1 Summary of required connectivity and examples

10、 of application types 10 A.1.2 Examples of applications10 A.2 Market size, value and type11 A.3 Market value projections12 A.4 Traffic evaluation .13 Annex B: Technical information 14 B.1 Detailed technical description 14 B.1.1 Technical background 14 B.1.2 Draft system parameters.14 B.2 Technical j

11、ustification 15 B.2.1 Background 15 B.2.2 Link budget 16 B.3 Information on current version of relevant ETSI standard.17 Annex C: Expected compatibility issues 18 C.1 Coexistence issues18 C.2 Current ITU allocations19 C.3 Sharing issues.19 History 20 ETSI ETSI TR 102 400 V1.2.1 (2006-07) 4 Intellect

12、ual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (

13、IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR se

14、arches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by

15、 ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). Introduction The present document includes necessary information to support the co-operation under the MoU between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and T

16、elecommunications Administrations (CEPT) for amending the ERC Recommendation 70-03 1. ETSI ETSI TR 102 400 V1.2.1 (2006-07) 5 1 Scope The present document defines the requirements for radio frequency usage for RTTT and ITS equipment operating in the 63 GHz to 64 GHz frequency range. It includes nece

17、ssary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: market information (annex A); technical information (annex B); expected compatibility issues (anne

18、x C). 2 References For the purposes of this Technical Report (TR), the following references apply: 1 CEPT/ERC Recommendation 70-03: “Relating to the use of Short Range Devices (SRD)“, annex 5. 2 CEPT/ECC/DEC/(02)01: “Frequency bands to be designated for the co-ordinated introduction of Road Transpor

19、t and Traffic Telematic Systems“. 3 ITU-R Recommendation SM.1538-1: “Technical and operating parameters and spectrum requirements for short-range radiocommunication devices“. 4 IEEE 802.11a: “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications - Amendment 1: High-speed P

20、hysical Layer in the 5 GHz Band.“ Adopted by the ISO/IEC and redesignated as ISO/IEC 8802-11:1999/Amd 1:2000(E). 5 CEPT/ERC Report 3: “Harmonization of frequency bands to be designated for road transport information systems“. 6 CEPT/ERC Report 25: “The European Table of Frequency Allocations and Uti

21、lizations Covering the Frequency Range 9 KHz to 275 GHz“, Lisbon January 2002 - Dublin 2003 - Turkey 2004. 7 ITU Radio Regulations (2004). 8 Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields 0 Hz to 300 GHz (1999/519/EC). 9 CENELEC E

22、N 50392: “Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz)“. 10 FCC 47 CFR Ch. I, 15.255: “Operation within the band 59.0 to 64.0 GHz“. 11 ISO/CD 21217: “Communicat

23、ions, Air Interface, Long and Medium Range (CALM) - Architecture“. ETSI ETSI TR 102 400 V1.2.1 (2006-07) 6 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: EIRP: product of the power supplied to the antenna

24、and the maximum antenna gain relative to an isotropic radiator (absolute or isotropic gain) roadside unit: roadside unit includes localized transmitters or receivers or both functions integrated into one unit roadside-to-vehicle communications: also includes vehicle-to roadside communications roadsi

25、de: includes: - single RSUs operating in a stand-alone fashion; or - a group of RSUs connected together by an appropriate infrastructure, which may include an information network; or - a single RSU connected to an information network. 3.2 Symbols For the purposes of the present document, the followi

26、ng symbols apply: Bn billion (=109) dB decibeldBm dB relative to 1 milliwatt dBW dB relative to 1 Watt GHz Gigahertz m metre s second 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: AFC Automatic Fee Collection BPSK Binary Phase-Shift Keyed CALM Communi

27、cations Air interface Long and Medium CEPT European Conference of Post and Telecommunications Administrations DPSK Differential Phase Shift Keyed EBG Electronic Band-Gap ECC Electronic Communications Committee EIRP Equivalent Isotropically Radiated Power ERM Electromagnetic compatibility and Radio s

28、pectrum Matters FCC Federal Communications Commission FSK Frequency Shift Keyed IEEE Institution of Electrical and Electronic Engineers IF Intermediate Frequency ISM Industrial, Scientific and Medical ISO International Standards Organization ISS Inter-Satellite Service ITS Intelligent Transport Syst

29、ems IVC Inter-Vehicle Communications LAN Local Area Network LEO Low Earth Orbit MAC Medium Access Control ETSI ETSI TR 102 400 V1.2.1 (2006-07) 7 MoU Memorandum of Understanding OFDM Orthogonal Frequency Division Multiplex PHY PHYsical layer QAM Quadrature Amplitude Modulation QPSK Quadrature Phase

30、Shift Keyed RF Radio Frequency RM Radio Matters RSU Road-Side Unit RTTT Road Transport and Traffic Telematics RVC Roadside-to-Vehicle CommunicationsRx Receiver SNR Signal-to-Noise Ratio SRD Short Range Device TDD Time Division Duplexing Tx Transmitter WG Working Group 4 Executive summary The present

31、 document takes forward previous CEPT/ECC Decisions and Recommendations relating to millimetric communications for Transport Telematics applications, and makes the case for the use of the 63 GHz to 64 GHz band for all applications that are generally included in this description. The proposals are ba

32、cked by the work currently being done by a range of companies who have an integrated plan to realize a “next generation road vehicle communication“ system in the immediate future. The present documents objectives are to: a) demonstrate that the need for high data rate communications in the millimetr

33、ic band is a real and growing one; b) provide justification for the continued designation in Europe of 63 GHz to 64 GHz; c) illustrate the advantages of the use of the 63 GHz to 64 GHz band, in respect of: i) the ability to form and control beam patterns resulting from the small wavelength and thus

34、viable size of antennas, the advantage this brings in respect of control of exposure of radiations to users and other humans and animals, and in respect of channel optimization, and in respect of geographic re-use of bandwidth, and in respect of certainty of delivery of (and elimination of false del

35、ivery) of data to intended users; ii) the advantages resulting from oxygen in respect of geographic re-use of bandwidth, and in respect of compatibility issues with other services, and the particular aspects of the Transport Telematics application that suit it to this band. d) illustrate how safety,

36、 management, regulatory and commercial applications can co-exist “symbiotically“, and be combined to deliver ALL applications more readily (in respect of timescales and financially) and to show the enormous economic benefit that this approach will bring; e) describe the technical aspects of the prop

37、osed usage and the items requiring standardization. 4.1 Status of the system reference document ERM-RM#32 created a new work item for TR 102 400 (SRDoc for ITS/RTTT in 63 GHz to 64 GHz). The present document is the result of this decision, and updates and replaces all previous work and documents reg

38、arding ITS RTTT in 63 GHz to 64 GHz. Version 1.2.1_1.1.2 was created and agreed at the ERM TG37#10 meeting; version 1.2.1_1.1.5 has taken account of subsequent comments from ETSI members and was also reviewed and finally adopted by ERM RM#32. The present document was forwarded to WG FM for considera

39、tion. After incorporating editorial it is reduced pro-rata for emissions having a bandwidth of less than 100 MHz. ETSI ETSI TR 102 400 V1.2.1 (2006-07) 9 6 Proposed regulations It is proposed that CEPT adopt power levels for the 63 GHz to 64 GHz band as shown in table 2 and include these in annex 5

40、of CEPT/ERC Recommendation 70-03 1. Table 2: Proposed regulation for the 63 GHz to 64 GHz band Frequency Band Power Duty cycle Channel spacing ERC Decision Notes 63 GHz to 64 GHz 40 dBm EIRP maximum mean power 43 dBm EIRP maximum peak power 27dBm maximum peak conducted power No restriction No spacin

41、g ECC DEC(02)01 2 Vehicle-to-vehicle and road-to-vehicle systems Measured over any continuous period of 53 seconds. The maximum peak transmitted power is for an emission bandwidth of greater than 100 MHz. It is reduced pro-rata for an emission bandwidth less than 100 MHz In addition, it is proposed

42、that the title of annex 5 of CEPT/ERC Recommendation 70-03 1 (currently “Road Transport and Traffic Telematics (RTTT)“) and its scope be changed to include the term “Intelligent Transport Systems (ITS)“. Further information and justification on the need to have the set of parameters as shown in tabl

43、e 2 is given in clause B.2.1. 7 Main conclusions A fast and versatile ITS communication system is needed to support the large number of RTTT and other applications (please see clause A.1.2) that have been identified. Systems are now being developed in support of this, making use of several bearer fr

44、equencies, including millimetre wave. The ISO standards group TC204 WG16.1 has prepared and successfully balloted a specification (ISO/CD 21217) 11 for an architecture which will link applications to an appropriate bearer or bearers, depending on what each has to offer at a given time in a given sit

45、uation. This will shortly become a full ISO /IEC Standard. It is recognized that all bearers cannot support all applications, and that there will be circumstances which favour one over another. Millimetric systems in the 63 GHz to 64 GHz part of the spectrum can offer communications with a high data

46、 rate, typical ranges up to 1 km, a low reuse distance and minimal interference from and to other users, together with versatile frequency planning because of the available bandwidth. In addition, they can offer a method of obtaining redundancy when used with other systems for more safety-critical a

47、pplications. Prototypes became available in November 2005, and specialized short range demonstrators are expected in the near future. 8 Expected ECC actions ETSI requests ECC to consider the present document, which includes necessary information to support the co-operation under the MoU between ETSI

48、 and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT) for amending the CEPT/ERC Recommendation 70-03 1. ETSI requests that the ECC consider adopting the power levels in table 2 for inclusion in CEPT/ERC Recommendation 70-0

49、3 1, annex 5 and also consider changing the title and scope of that annex to include the term “Intelligent Transport Systems (ITS)“. ETSI ETSI TR 102 400 V1.2.1 (2006-07) 10Annex A: Market information A.1 Applications A.1.1 Summary of required connectivity and examples of application types The connectivity required by the application types can be summarized as follows: Inter-vehicle: - Vehicle cluster covering several lanes (e.g. lane management, overtaking assist, police instructions to vehicle in-front/behind). - Linear (e.g. convoy