ETSI GSM 04 02-1996 Digital Cellular Telecommunications System (Phase 2+) GSM Public Land Mobile Network (PLMN) Access Reference Configuration《数字蜂窝通信系统(第2+阶段) GSM公共陆地移动网(PLMN)接入参考配_1.pdf

《ETSI GSM 04 02-1996 Digital Cellular Telecommunications System (Phase 2+) GSM Public Land Mobile Network (PLMN) Access Reference Configuration《数字蜂窝通信系统(第2+阶段) GSM公共陆地移动网(PLMN)接入参考配_1.pdf》由会员分享，可在线阅读，更多相关《ETSI GSM 04 02-1996 Digital Cellular Telecommunications System (Phase 2+) GSM Public Land Mobile Network (PLMN) Access Reference Configuration《数字蜂窝通信系统(第2+阶段) GSM公共陆地移动网(PLMN)接入参考配_1.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、* GSM GSM 04.02 May 1996 Version 5.0.0 Source: ETSI TC-SMG Reference: TS/SMG-O30402Q ICs: 33.060.50 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS Digital cellular telecommunications system (Phase 2+); GSM

2、Public Land Mobile Network (PLMN) access reference configuration (GSM 04.02) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=fr, a=atla

3、s, p=etsi, s=secretariat - Internet: secretariatetsi.fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunica

4、tions Standards Institute 1996. All rights reserved. ETSI GSM*O4.02 96 = 3400855 010603L 865 = Page 2 GSM 04.02 Version 5.0.0: May 1996 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments

5、 concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. ETSI GSM*04.02 96 3400855 0106032 7TL m Page 3 GSM 04.02 Version 5.0.0: May 1996 Contents Foreword . 5 1 Scope 7 1.1 Normative references 7 1.2 Abbreviations 9 2 General defin

6、itions . 10 2.1 Reference Configurations . 10 2.2 Functional Groups . 10 2.3 Reference Points 1 0 2.4 GSM Interface Points 10 3 GSM Reference Configuration 11 3.1 Mobile Termination (MT) 11 3.2 Base Station + MSC (BSlMSC) 12 4 Physical Realisation -13 History . 15 ETSI GSM*OY*OZ 96 m 3400855 0306033

7、 b38 m Page 4 GSM 04.02 Version 5.0.0: May 1996 Blank page ETSI GSM*04*02 9b 3400855 0306034 574 Page 5 GSM 04.02 Version 5.0.0: May 1996 Foreword This Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) Technical Committee (TC) o

8、f the European Telecommunications Standards Institute (ETSI). This GTS provides a mechanism giving reliable transfer of signalling messages within the digital cellular telecommunications system (Phase 2Phase 2+). This GTS is a TC-SMG approved GSM technical specification version 5, which contains GSM

9、 Phase 2+ enhancementsfeatures to the version 4 GSM technical specification. The ETS from which this Phase 2+ GTS has evolved is Phase 2 GSM 04.02 version 4.0.4. GTS are produced by TC-SMG to enable the GSM Phase 2 + specifications to become publicly available, prior to submission for the formal ETS

10、I standards approval procedure to become European Telecommunications Standards (ETS). This ensures the earliest possible access to GSM Phase 2 + specifications for all Manufacturers, Network operators and implementors of the Global System for Mobile communications. The contents of this GTS are subje

11、ct to continuing work within TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Version 5.x.y where: y the third digit is in

12、cremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. NOTE: TC-SMG has produced documents which give the technical specifications for the implementati

13、on of the digital cellular telecommunications system. Historically, these documents have been identified as GSM Technical Specifications (GSM-TSs). These TSs may have subsequently become I-ETSs (Phase l), or ETSs/ETSI Technical Reports (ETRs) (Phase 2). TC-SMG has also produced ETSI GSM TSs which gi

14、ve the technical specifications for the implementation of Phase 2+ enhancements of the digital cellular telecommunications system. These version 5.x.x GSM Technical Specifications may be referred to as GTSs. ETSI GSM*O4-02 96 H 3400855 0306035 400 Page 6 GSM 04.02 Version 5.0.0: May 1996 Blank page

15、ETSI GSM*04=02 96 3400855 030b036 347 Page 7 GSM 04.02 Version 5.0.0: May 1996 1 Scope This Technical Specification describes the reference configuration for access to a GSM PLMN. A user accesses a GSM PLMN via a number of interfaces, including the MS-BS interface. The purpose of this Technical Spec

16、ification is to indicate the possible access arrangements that may be used in conjunction with the MS-BS interface. 1.1 Normative references This ETS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the

17、 text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this ETS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 121 31

18、 141 151 161 71 11 21 GSM O1 .O4 (ETR 100): “Digital cellular telecommunications system (Phase 2); Abbreviations and acronyms“. GSM 02.02 (ETS 300 501): “Digital cellular telecommunications system (Phase2); Bearer Services (6s) supported by a GSM Public Land Mobile Network (PLMN)“. GSM 04.01 (ETS 30

19、0 550): “Digital cellular telecommunications system (Phase 2); Mobile Station - Base Station System (MS - BSS) interface General aspects and principles“. GSM 04.03 (ETS 300 552): “Digital cellular telecommunications system (Phase 2); Mobile Station - Base Station System (MS - BSS) interface Channel

20、structures and access capabilities“. GSM 04.04 (ETS 300 553): “Digital cellular telecommunications system (Phase 2); layer 1 General requirements“. GSM 04.05 (ETS 300 554): “Digital cellular telecommunications system (Phase 2); Data Link (DL layer General aspects“. GSM 04.06 (ETS 300 555): “Digital

21、cellular telecommunications system (Phase 2); Mobile Station - Base Station System (MS - BSS) interface Data Link (DL) layer specification“. GSM 04.07 (ETS 300 556): “Digital cellular telecommunications system (Phase 2); Mobile radio interface signalling layer 3 General aspects“. GSM 04.08 (ETS 300

22、557): “Digital cellular telecommunications system (Phase 2); Mobile radio interface layer 3 specification“. GSM 04.1 O (ETS 300 558): “Digital cellular telecommunications system (Phase 2); Mobile radio interface layer 3 Supplementary services specification General aspects“. GSM 04.1 1 (ETS 300 559):

23、 “Digital cellular telecommunications system (Phase 2); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. GSM 04.1 2 (ETS 300 560): “Digital cellular telecommunications system (Phase 2); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interf

24、ace“. ETSI GSfl*04.02 76 3400855 0106037 283 Page 8 GSM 04.02 Version 5.0.0: May 1996 11 31 i 51 GSM 04.1 3 (ETC 300 561): “Digital cellular telecommunications system (Phase 2); Performance requirements on mobile radio interface“. GSM 04.21 (ETS 300 562): “Digital cellular telecommunications system

25、(Phase 2); Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. GSM 04.22 (ETS 300 563): “Digital cellular telecommunications system (Phase 2); Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and t

26、he Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. GSM 04.80 (ETS 300 564): “Digital cellular telecommunications system (Phase 2); Mobile radio interface layer 3 supplementary services specification Formats and coding“. GSM 04.81 (ETC 300 565): “Digital cellular teleco

27、mmunications system (Phase 2); Line identification supplementary services - Stage 3“. GSM 04.82 (ETS 300 566): “Digital cellular telecommunications system (Phase 2); Call Forwarding (CF) supplementary services - Stage 3“. GSM 04.83 (ETC 300 567): “Digital cellular telecommunications system (Phase 2)

28、; Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. GSM 04.84 (ETC 300 568): “Digital cellular telecommunications system (Phase 2); MultiParty (MPTY) supplementary services - Stage 3“. GSM 04.85 (ETS 300 569): “Digital cellular telecommunications system (Phase 2); Closed User

29、 Group (CUG) supplementary services - Stage 3“. GSM 04.86 (ETS 300 570): “Digital cellular telecommunications system (Phase 2); Advice of Charge (AOC) supplementary services - Stage 3“. GSM 04.88 (ETS 300 571): “Digital cellular telecommunications system (Phase 2); Call Barring (CB) supplementary se

30、rvices + Stage 3“. GSM 04.90 (ETS 300 572): “Digital cellular telecommunications system (Phase 2); Unstructured supplementary services operation - Stage 3“. GSM 05.01 (ETS 300 573): “Digital cellular telecommunications system (Phase 2); Physical layer on the radio path General description“. GSM 05.0

31、2 (ETS 300 574): “Digital cellular telecommunications system (Phase 2); Multiplexing and multiple access on the radio path“. GSM 05.03 (ETS 300 575): “Digital cellular telecornmunications system (Phase 2); Channel coding“. GSM 05.04 (ETS 300 576): “Digital cellular telecommunications system (Phase 2

32、); Modulation“. GSM 05.05 (ETS 300 577): “Digital cellular telecommunications system (Phase 2); Radio transmission and reception“. GSM 05.08 (ETS 300 578): “Digital cellular telecommunications system (Phase 2); Radio subsystem link control“. i341 ETSI GSM*04=02 96 D 3400855 0106038 11T = Page 9 GSM

33、04.02 Version 5.0.0: May 1996 GSM 05.1 O (ETS 300 579): “Digital cellular telecommunications system (Phase 2); Radio subsystem synchronisation“. GSM 05.90 (ETR 108): “Digital cellular telecommunications system (Phase 2); GSM Electro Magnetic Compatibility (EMC) considerations“. GSM 07.01 (ETS 300 58

34、2): “Digital cellular telecommunications system (Phase 2); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS) I. GSM 07.02 (ETS 300 583): “Digital cellular telecommunications system (Phase 2); Terminal Adaptation Functions (TAF) for services using asynchronous bearer capabilitie

35、s“. GSM 07.03 (ETS 300 584): “Digital cellular telecommunications system (Phase 2); Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities“. CCITT Series V Recommendations: “Data communication over the Telephone network“. i371 CCITT Series X Recommendations: “Data com

36、munication networks“. 381 CCITT Recommendation 1.420: “Basic user-network interface“ 1.2 Abbreviations Abbreviations used in this specification are listed in GSM O1 .O4 ETSI GSM*O4=02 96 9 3400855 OLOb039 056 Page 10 GSM 04.02 Version 5.0.0: May 1996 2 General definitions The following definitions 2

37、.1-2.3 are based on those used for ISDN. 2.1 Reference Configurations Reference Configurations are conceptual configurations useful in identifying access arrangements to a network. Two concepts are used in defining reference configurations: reference points and functional groups. 2.2 Functional Grou

38、ps Functional Groups are sets of functions which may be needed in network access arrangements. In a particular access arrangement, specific functions in a functional group may or may not be present. Note that specific functions in a functional group may be performed in one or more pieces of equipmen

39、t. 2.3 Reference Points Reference Points are the conceptual points dividing functional groups. In a specific access arrangement, a reference point may correspond to a physical interface between pieces of equipment, or there may not be any physical interface corresponding to the reference point. The

40、following definition is used in this Technical Specification: 2.4 GSM Interface Points GSM Interface Points are reference points within a GSM PLMN at which a GSM specified interface is always identified. ETSI GSM*O4-02 96 3400855 OLOb040 878 MTO MT1 TA MT1 - S - - MT2 Page 11 GSM 04.02 Version 5.0.0

41、: May 1996 BS/MSC - BS/MSC BS/MSC BS/MSC 3 GSM Reference Configuration Figure 1 : GSM PLMN Access Reference Configuration The terminal equipment functional groups TE1, TE2 and TA are conceptually the same functional groups as those in the ISDN. The two new functional groups are: 3.1 Mobile Terminati

42、on (MT) which performs the following functions: radio transmission termination; radio transmission channel management; terminal capabilities, including presentation of a man-machine interface to a user; speech encodingdecoding; error protection for all information sent across the radio path. This in

43、cludes FEC (forward error correction) and, for signalling and user data (except for transparent data services), ARQ (automatic request forretransmission); flow control of signalling and mapping of user signalling to/from PLMN access signalling; flow control of user data (except for transparent data

44、services) and mapping of flow control for asynchronous transparent data services; rate adaptation of user data between the radio channel rate and user rates; multiple terminal support; mobility management. There are three types of MT: - MTO includes functions belonging to the functional group MT, wi

45、th support of no terminal interfaces. - MTl includes functions belonging to the functional group MT, and with an interface that complies with the GSM recommmended subset of the ISDN user-network interface specifications. ETSI GSfl*04.02 96 = 3400855 OLObO4L 704 = Page 12 GSM 04.02 Version 5.0.0: May

46、 1996 - MT2 includes functions belonging to the functional group MT, and with an interface that complies with the GSM 07.0 series Terminal Adaptation Function specifications. Accordingly, the interchange circuit mapping at the MT2 to TE interface shall comply with the CCIT V.24 or X.21 recmmendation

47、s; while the physical implementation shall conform either to the CCITT V.28, or V.11, or to the IrDA IrPHY, or to the PCMCIA 2.1, or to the PC-Card 3.0 electrical specification, or to later revisions. The MT plus any TE/(TE + TA) constitutes the Mobile Station, MS. 3.2 Base Station + MSC (BS/MSC) wh

48、ich include the following functions: - radio transmission termination; - speech transcoding; - radio transmission channel management; - error protection for all information sent across the radio path. This includes FEC (forward error correction) and for signalling and user data (except for transpare

49、nt data services), ARQ (automatic request for retransmission); - link layer functions for signalling across the radio path; - MS-BS circuit establishment and release functions; - handover functions: - rate adaptation of user data. ETSI GSM*O4=02 96 W 3400855 O306042 640 Page 13 GSM 04.02 Version 5.0.0: May 1996 4 Physical Realisation In a GSM PLMN, the reference point Um is a GSM interface point, .e. it is always implemented as a physical interface (according to GSM Technical Specifications in the 04 and 05 series). The reference points S and R may be optionally implemented