ETSI GSM 02 30-1995 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02 30)《数字蜂窝通信系统(第2+阶段) 移动台(MS)人机接口(MMI) GSM 02.pdf

《ETSI GSM 02 30-1995 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02 30)《数字蜂窝通信系统(第2+阶段) 移动台(MS)人机接口(MMI) GSM 02.pdf》由会员分享，可在线阅读，更多相关《ETSI GSM 02 30-1995 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02 30)《数字蜂窝通信系统(第2+阶段) 移动台(MS)人机接口(MMI) GSM 02.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、3400855 0078494 9T5 ETSI GSM 02.30 December 1995 Version 5.0.0 Source: ETSI TC-SMG Reference: TS/SMG-O10230Q ICs: 33.060.50 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS Digital cellular telecommunications

2、 system (Phase 2+); Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02.30) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=

3、fr, a=atlas, p=etsi, s=secretariat - Internet: secretariatQetsi.fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Te

4、lecommunications Standards Institute 1995. All rights reserved. Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Su

5、pport Dept.“ at the address shown on the title page. ETSI *GSM*O2.30 95 W 3400855 O078496 778 = Page 3 GSM 02.30 Version 5.0.0: December 1995 Contents Foreword . 5 Scope 7 0.1 Normative references 7 0.2 Abbreviations . 8 General 8 1.2 1.1 Basic philosophy 8 Structure of the specification . 9 Physica

6、l user input features 9 General 9 2.1 2.2 MMI related to MS access . 9 2.3 MMI related to MS features 9 2.4 MMI related to user information . 10 2.5 Other input features . 10 Indications and output features . 10 3.1 General 10 3.2 MMI related to MS access . 10 3.3 MMI related to MS features 11 3.4 M

7、MI related to user information . 11 3.5 Other output features . 11 Procedures 11 4.1 General 11 4.2 MS access . 11 4.3 Definition of functions 12 4.4 Call Control 12 4.4.1 General 12 4.4.2 Voice calls . 12 Mobile originated calls . 12 4.4.2.2 Emergency calls 12 Mobile terminated calls 13 Supplementa

8、ry Services Control . 13 4.5.1 General 13 4.5.2 Structure of the MMI 13 4.5.3 4.5.3.1 Handling of defined GSM supplementary services 14 4.5.3.2 Handling of not-implemented supplementary services 14 4.4.2.1 4.4.2.3 4.5 Handling of supplementary services . 14 Registration of new password . 15 Handling

9、 of supplementary services within a call 15 4.5.5.1 transfer general principles . 15 4.5.5.2 Call Waiting (CW) 16 4.5.5.3 Call hold . 17 4.5.5.4 MultiParty . 17 4.5.5.5 Explicit Call Transfer 17 4.5.5.6 Special case 17 4.6 SIM interfaces 18 4.6.1 Entry of PIN and PIN2 . 18 4.6.2 Change of PIN or PIN

10、2 18 4.6.3 Unblocking of PIN or PIN2 18 4.6.4 Reading the abbreviated dialling code 18 4.6.5 Status information - return codes 18 Presentation of IMEI 19 Call Waiting, call hold, multiparty services and call 4.7 4.5.4 4.5.5 ETSI *GSM*02.30 95 m 3400855 0078497 604 m Page 4 GSM 02.30 Version 5.0.0: D

11、ecember 1995 5 The basic public MMI 19 5.1 General 19 5.2 Basic public MMI specific features 20 5.2.1 Keyboard layout 20 5.2.2 Number entry 20 5.2.3 Call control 20 5.2.4 Call acceptance 20 5.2.5 Call initiation 20 5.2.5.1 “Off Hook“ call initiation . 20 5.2.5.2 “On Hook“ call initiation . 20 5.2.6

12、Call termination . 21 5.2.7 Supplementary services control 21 5.2.8 Payment 21 5.2.9 CountryPLMN selection . 21 Annex A (normative): MS access mealy graph . 22 Annex B (normative): Codes for defined Supplementary Services 24 Annex C (normative): Codes for Tele- and bearer services . 26 History . 29

13、ETSI *GSx02.30 95 = 3400855 0078Y98 540 = Page 5 GSM 02.30 Version 5.0.0: December 1995 Foreword This Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) Technical Committee (TC) of the European Telecommunications Standards instit

14、ute (ETSI). This GTS defines the requirements for and give guidelines on the MMI for calls on the GSM mobile station within the digital cellular telecommunications system (Phase 2/Phase 2+). This GTS is a TC-SMG approved GSM technical specification version 5, which contains GSM Phase 2+ enhancementd

15、features to the version 4 GSM technical specification. The European Telecommunications Standard from which this Phase 2+ GTS has evolved is Phase 2 GSM ETS 300 51 1 edition 2 (GSM 02.30 version 4.13.0). GTS are produced by TC-SMG to enable the GSM Phase 2+ specifications to become publicly available

16、, prior to submission for the formal ETSI standards approval procedure to become European Telecommunications Standards (ETS). This ensures the earliest possible access to GSM Phase 2+ specifications for all Manufacturers, Network operators and implementors of the Global System for Mobile communicati

17、ons. The contents of this GTS are subject to continuing work within TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Versi

18、on 5.x.y where: y the third digit is incremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. The specification from which this GTS has been derived wa

19、s originally based on CEPT documentation, hence the presentation of this GTS may not be entirely in accordance with the ETSI rules. Reference is made within this TS to GSM-TSs (note). NOTE: TC-SMG has produced documents which give the technical specifications for the implementation of the digital ce

20、llular telecommunications system. Historically, these documents have been identified as GSM Technical Specifications (GSM-TSs). These TSs may have subsequently become I-ETSs (Phase l), or ETSs/ETSI Technical Reports (ETRs) (Phase 2). TC-SMG has also produced ETSI GSM TSs which give the technical spe

21、cifications for the implementation of Phase 2+ enhancements of the digital cellular telecommunications system. These version 5.x.x GSM Technical Specifications may be referred to as GTSs. ETSI *GSM*02.30 95 3400855 0078499 487 Page 6 GSM 02.30 Version 5.0.0: December 1995 Blank page ETSI *GSM*02.30

22、75 m 3400855 0078500 T29 m Page 7 GSM 02.30 Version 5.0.0: December 1995 O Scope The purpose of this specification is to define the requirements for and give guidelines on the MMI for calls on the GSM Mobile Station. This includes the requirements of the user procedures for call control and suppleme

23、ntary service control, the requirements on the physical input media and the output, such as indications and displayed information. This specification complements specifications GSM 02.07, 02.1 1, 02.17, 02.40, 03.01, 03.09, 03.12, 03.14, 04.08, 05.08 11 .O1 and 11.1 O and deals with MMI items not co

24、vered by these specifications. 0.1 Normative references This ETS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent ame

25、ndments to or revisions of any of these publications apply to this ETS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 1 31 41 i51 171 91 GSM O1 .O4 (ETR 100): “European digital cellular telecommunication syste

26、m (Phase 2); Abbreviations and acronyms“. GSM 02.04 (ETS 300 503): “European digital cellular telecommunication system (Phase 2); General on supplementary services“. GSM 02.07 (ETS 300 505): “European digital cellular telecommunication system (Phase 2); Mobile Station (MS) features“. GSM 02.1 1 (ETS

27、 300 507): “European digital cellular telecommunication system (Phase 2); Service accessibility“. GSM 02.17 (ETS 300 509): “European digital cellular telecommunication system (Phase 2); Subscriber identity modules Functional characteristics“. GSM 02.30 (ETS 300 51 1): “European digital cellular tele

28、communication system (Phase 2); Man-Machine Interface (MMI) of the Mobile Station (MS)“. GSM 02.40 (ETS 300 512): “European digital cellular telecommunication system (Phase 2); Procedures for call progress indications“. GSM 02.83 (ETS 300 51 6): “European digital cellular telecommunication system (P

29、hase 2); Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 1 I. GSM 02.84 (ETS 300 51 7): “European digital cellular telecommunication system (Phase 2); Multiparty (MPTY) supplementary services - Stage 1 II. GSM 02.90 (ETS 300 625): “European digital cellular telecommunication sy

30、stem (Phase 2); Stage 1 description of Unstructured Supplementary Service Data (UUSD)“. GSM 03.01 (ETS 300 521): “European digital cellular telecommunication system (Phase 2); Network functions“. GSM 03.09 (ETS 300 527): “European digital cellular telecommunication system (Phase 2); Handover procedu

31、res“. GSM 03.1 2 (ETS 300 530): “European digital cellular telecommunication system (Phase 2); Location registration procedures“. GSM 03.1 4 (ETS 300 532): “European digital cellular telecommunication system (Phase 2); Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system“. ETSI

32、*GSM*02-30 75 3400855 0078501 7b5 H Page 8 GSM 02.30 Version 5.0.0: December 1995 11 71 i 91 GSM 03.38 (ETS 300 628): “European digital cellular telecommunication system (Phase 2); Alphabets and language-specific information“. GSM 04.08 (ETS 300 557): “European digital cellular telecommunication sys

33、tem (Phase 2); Mobile radio interface layer 3 specification“. GSM 04.80 (ETS 300 564): “European digital cellular telecommunication system (Phase 2); Mobile radio interface layer 3 supplementary services Specification Formats and coding“. GSM 05.08 (ETS 300 578): “European digital cellular telecommu

34、nication system (Phase 2); Radio subsystem link control“. GSM 09.02 (ETS 300 599): “European digital cellular telecommunication system (Phase 2); Mobile Application Part (MAP) specification“. GSM 11 -1 O (ETS 300 607): “European digital cellular telecommunication system (Phase 2); Mobile Station (MS

35、) conformity specification“. GSM 11.1 1 (ETS 300 608): “European digital cellular telecommunication system (Phase 2); Specification of the Subscriber Identity Module-Mobile Equipment (SIM-ME) interface“. I221 CCITT Recommendation E.164: “Numbering plan for the ISDN era“. CCIlT Recommendation E.131:

36、“Subscriber control procedures for supplementary telephone services“. CCITT Recommendation E.121: “Pictograms and symbols to assist users of the telephone service“. 0.2 Abbreviations Abbreviations used in this specification are listed in GSM 01.04. 1 General 1.1 Basic philosophy The basic idea behin

37、d this specification is that it should give a minimum level of requirements, with emphasis on items which are seen as important from a pan-european usage point of view. This means, that the requirements are mainly dealing with standardized control procedures of access to services .e. call establishm

38、ent, invocation of supplementary services and so on. This also includes standardized network information to the users such as tones and announcements. The requirements on the physical layout of input and output features are kept to a minimum to allow for differentiated types of MSs and to ease the i

39、ntroduction of future developments in the area of MMI. The standardized control procedures describe the sequence of real actions to be taken by the users. However, since the requirements on the physical input features are minimal the control procedures may differ between MSs depending on the solutio

40、n of the manufacturers. The “bridge“ between these requirements is however that the same logical actions have to be taken by the user. That is, the user has to provide the same information for the call control and signalling no matter what the method is. This is also valid if an automatic device is

41、used for carrying out the same actions. The logical procedures are therefore defined and standardized in this specification. The drawback of this approach is that the users of GSM MSs may face a lot of different types of physical MMI which they have to learn. However, to deal with this problem the s

42、pecification gives a definition of a basic public MMI. The basic public MMI allows non-experienced, casual users to make and receive a telephony call. This definition is directed to manufacturers of public mobile telephones. Page 9 GSM 02.30 Version 5.0.0: December 1995 Optionally, the user may set

43、the ME to disable some or all of the MMI functions defined in this specification. This setting shall only apply when the same SIM is in use (see GSM 02.17 for security policy), otherwise the ME shall enable the standard MMI. 1.2 Structure of the specification The specification is divided into sectio

44、ns describing respectively the control procedures, the input features and the output features. The final section defines the basic public MMI. For a lot of items for which no particular MMI specification is necessary there is a reference to the specifications where the basic requirements are to be f

45、ound (.e. MS features specified in GSM 02.07 and language of announcements specified in GSM 02.40). 2 Physical user input features 2.1 General This section gives the requirements or guidelines for the MMI of the input related MS features. Basic requirements on these features are given in GSM 02.07 a

46、nd GSM 02.40. 2.2 MMI related to MS access No requirements additional to those in other GSM specifications (Ref. GSM 02.17, 11 .lo). 2.3 MMI related to MS features The three first issues are covered in GSM 02.07: * Country / PLMN selection: The method is manufacturer optional. * International Access

47、 Function (“+“ key): and Keypad: The physical means of entering the characters 0-9, +, and # (.e. the SELECT function) may be keypad, voice input device, DTE or other, but there must be means to enter this information. The relationship on the keypad between the numbers and letters (where used) is im

48、portant when mnemonic dialling may be used. The following relationship is therefore preferred though optional. 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ O See also section 5.2.1. ACCEPT, SEND and END functions: The physical means to perform these functions may be keypad, voice input device

49、, DTE or other, but there must be means to perform these functions. ACCEPT and SEND may use the same means. * Setting of called Number Fields (Type of Number), use of the “+“ key function: Users may enter a called number in two formats, called here International or Open. The Type of Number (TON) may be set to other values if required, but the procedure for this is not defined here. - - ETSI *GSM*02.30 95 3Y008.55 0078503 738 Page 10 GSM 02.30 Version 5.0.0: December 1995 “Internationat format“ This is entered by starting with a “+“ followed by country code, even fo