ETSI ETS 300 907-1999 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (Fifth Edition GSM 02 30 Version 5 7 1 Release 19_1.pdf

《ETSI ETS 300 907-1999 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (Fifth Edition GSM 02 30 Version 5 7 1 Release 19_1.pdf》由会员分享，可在线阅读，更多相关《ETSI ETS 300 907-1999 Digital Cellular Telecommunications System (Phase 2+) Man-Machine Interface (MMI) of the Mobile Station (MS) (Fifth Edition GSM 02 30 Version 5 7 1 Release 19_1.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、STDmETSI ETS 300 907-ENGL 1999 = 3400855 0425532 982 m ETS 300 907 August 1999 Fifth Edition Source: SMG Reference: RUSMG-OI 0230QR6 ICs: 33.020 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) Digital cellular telecommunicationssystem (Phase 2+);

2、Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02.30 version 5.7.1 Release 1996) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE In

3、ternet: secretaflatetsi.fr - httpd/www.etsi.org Tel.: +33 4 92 94 42 O0 - Fax: +33 4 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunication

4、s Standards Institute 1999. All rights resewed. STD-ETSI ETS 300 707-ENGL 1997 3400855 0425533 17 Page 2 ETS 300 907 (GCM 02.30 uersion 5.7.1 Release 1996): August 1999 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise

5、, may occur. If you have comments concerning its accuracy, please write to “ETSI Standards Making Support Oept.“ at the address shown on the title page. STD.ETS1 ETS 300 707-ENGL 3799 = 3400855 042553L, 755 W Page 3 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 Contents Intellectua

6、l Property Rights 5 Foreword . 5 Introduction 5 Scope 7 o . 1 Normative references 7 0.2 Abbreviations . 8 0.3 Definitions 8 General 8 1.1 Basic philosophy 8 1.2 Structure of the specification . 9 Physical user input features 9 General 9 2.1 2.2 MMI related to MS access . 9 2.3 MMI related to MS fea

7、tures 9 2.4 MMI related to user information . 10 2.5 Other input features . 10 Indications and output features . 11 3.1 General 11 3.2 MMI related to MS access . 11 3.3 MMI related to MS features 11 3.4 MMI related to user information . 11 3.5 Other output features . 11 Procedures 11 4.1 General 11

8、4.2 MS access . 11 4.3 Definition of functions 12 4.4 Call Control 12 4.4.1 General 12 4.4.2 Voice calls . 12 Mobile originated calls . 12 Mobile terminated calls 13 Supplementary Services Control . 13 4.5.1 General 13 4.5.2 Structure of the MMI 13 4.5.3 Handling of supplementary services . 15 4.5.3

9、.1 Handling of defined GSM supplementary services 15 4.5.3.2 Handling of not-implemented supplementary services 15 Registration of new password . 17 Handling of supplementary services within a call 18 4.5.5.1 4.4.2.1 4.4.2.3 4.4.2.2 Emergency calls 12 4.5 4.5.4 4.5.5 Call Deflection, Call Waiting, C

10、all Hold, MultiParty Services, Explicit Call Transfer and Completion of Calls to 4.5.5.2 Call Waiting (CW) 19 4.5.5.3 Call hold . 19 4.5.5.4 MultiParty . 19 4.5.5.5 Explicit Call Transfer 19 4.5.5.6 Special case 20 4.5.5.7 Call Deflection 20 4.5.5.8 Completion of calls to busy subscribers - $(CCBS)$

11、 . 20 Busy Subscriber general principles . 18 sTD.ETS1 ETS 300 907-ENGL 1999 3400855 0425535 671 Page 4 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 4.5.6 Other handling of supplementary services . 20 4.5.6.1 Multiple Subscriber Profile - $(MSP)$ . 20 4.5.6.1.1 Registering an alte

12、rnative profile 20 4.5.6.1.2 Selecting an alternative profile on a per call basis 20 4.6 SIM interfaces . 21 4.6.1 Entry of PIN and PIN2 . 21 4.6.2 Change of PIN or PIN2 . 21 4.6.3 Unblocking of PIN or PIN2 21 4.6.4 Reading the abbreviated dialling code 21 4.6.5 Status information - return codes . 2

13、1 Presentation of IMEI 22 4.7 5 The basic public MMI 22 5.1 General 22 5.2 Basic public MMI specific features 22 5.2.1 Keyboard layout 22 5.2.2 Number entry 23 5.2.3 Call control 23 Call acceptance 23 5.2.4 5.2.5 Call inihation 23 5.2.5.1 “Off Hook“ call initiation . 23 5.2.5.2 “On Hook“ call initia

14、tion . 23 5.2.6 Call termination . 23 5.2.7 Supplementary services control 23 5.2.8 Payment 23 5.2.9 Country/PLMN selection . 23 Annex A (normative): Annex B (normative): MS access mealy graph . 24 Codes for defined Supplementary Services 26 Annex C (normative): Annex D (informative): Codes for Tele

15、- and bearer services . 28 Change Request History 30 History . 31 STD.ETSI ETS 300 907-ENGL Essential, orpotential The present document includes references to features which are not part of the Phase 2+ Release 96 of the GSM Technical specifications. All subclauses which were changed as a result of

16、these features contain a marker (see table below) relevant to the particular feature. The following table lists all features that were introduced after Release 96. STD-ETSI ETS 300 907-ENGL L999 m 3400855 0425538 3TO m Page 7 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 O Scope Th

17、is European Telecommunication Standard (ETS) defines the requirements for and gives guidelines on the MMI for calls on the GSM Mobile Station (MS). This includes the requirements of the user procedures for call control and supplementary service control, the requirements on the physical input media a

18、nd the output, such as indications and displayed information. This ETS complements specifications GSM 02.07 3, 02.11 4, 02.17 5, 02.40 7, 03.0111, 03.09 12, 03.12 13, 03.14 14, 04.08 16, 05.08 18, and 11.10 ZO and deals with MMI items not covered by these specifications. 0.1 Normative references Thi

19、s ETS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply

20、to this ETS only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Pl GSM O1 .O4 (ETR 350): “Digital cellular telecommunication system (Phase 2+); Abbreviations and acronyms“. 131 141 151 GSM 02.04 (ETS 300 918): “Digi

21、tal cellular telecommunication system (Phase 2+); General on supplementary services“. GSM 02.07 (ETS 300 906): “Digital cellular telecommunication system (Phase 2+); Mobile Station (MS) features“. GSM 02.1 1 (ETS 300 921): “Digital cellular telecommunication system (Phase 2+); Service accessibility“

22、. GSM 02.1 7 (ETC 300 922): “Digital cellular telecommunication system (Phase 2+); Subscriber identity modules Functional characteristics“. GSM 02.30 (ETS 300 907): “Digital cellular telecommunication system (Phase 2+); Man-Machine Interface (MMI) of the Mobile Station (MS)“. GSM 02.40: “Digital cel

23、lular telecommunication system (Phase 2+); Procedures for call progress indications“. GSM 02.83: “Digital cellular telecommunication system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 1“. 191 GSM 02.84: “Digital cellular telecommunication system (Phase 2+); Mult

24、iParty (MPTY) supplementary services - Stage 1 I. i 31 GSM 02.90: “Digital cellular telecommunication system (Phase 2+); “Stage 1 description of Unstructured Supplementary Service Data (USSD)“. GSM 03.01 : “Digital cellular telecommunication system (Phase 2+); Network functions“. GSM 03.09: “Digital

25、 cellular telecommunication system (Phase 2+); Handover procedures“. GSM 03.1 2: “Digital cellular telecommunication system (Phase 2+); Location registration procedures“. GSM 03.1 4: “Digital cellular telecommunication system (Phase 2+); Support of Dual Tone Multi-Frequency signalling (DTMF) via the

26、 GSM system“. STD.ETSI ETS 300 907-ENGL mq m 3400855 a425539 237 Page 8 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 11 51 1171 i 91 121 1 GSM 03.38 (ETS 300 900): “Digital cellular telecommunication system (Phase 2+);“Alphabets and language-specific information“. GSM 04.08 (ETS 3

27、00 940): “Digital cellular telecommunication system (Phase 2+); Mobile radio interface layer 3 specification“. GSM 04.80 (ETS 300 950): “Digital cellular telecommunication system (Phase 2+); Mobile radio interface layer 3 supplementary services specification Formats and coding“. GSM 05.08 (ETS 300 9

28、1 I): “Digital cellular telecommunication system (Phase 2+); Radio subsystem link control“. GSM 09.02 (ETS 300 974): “Digital cellular telecommunication system (Phase 2+); Mobile Application Part (MAP) specification“. GSM 11.10 (ETS 300 607): “Digital cellular telecommunication system (Phase 2+); Mo

29、bile Station (MS) conformity specification“. GSM 11.1 1 (ETS 300 977): “Digital cellular telecommunication system (Phase 2+); Specification of the Subscriber Identily Module - Mobile Equipment (SIM - ME) interface“. 1221 CCIlT Recommendation E.164: “Numbering plan for the ISDN era“ 1231 1241 CCITT R

30、ecommendation E.131: “Subscriber control procedures for supplementary telephone services“. CCITT Recommendation E.121: “Pictograms and symbols to assist users of the telephone service“. 0.2 Abbreviatlons Abbreviations used in this ETS are listed in GSM O1 .O4 I. 0.3 Definitions Directory Number: a s

31、tring consisting of one or more of the characters from the set (O, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, a, b, c associated with a nature of address indicator and number plan indicator. When using the public MMI for the control of supplementary services however, and # cannot be part of any SC or SI field

32、. NOTE 1: No such restriction on the SC and SI fields exists when using other (e.g. menu-driven) MMI for the control of supplementary services. When using the public MMI, certain limitations on the use of one and two digit directory numbers may apply. The use of other MMI can remove these restrictio

33、ns. NOTE 2: NOTE 3: This definition is not intended to require the support of all these characters in the MMI itself. 1 General 1.1 Basic philosophy The basic idea behind this ETS is that it should give a minimum level of requirements, with emphasis on items which are seen as important from a pan-Eu

34、ropean usage point of view. This means, that the requirements are mainly dealing with standardized control procedures of access to services .e. call establishment, invocation of supplementary services and so on. This also includes standardized network information to the users such as tones and annou

35、ncements. STDoETSI ETS 300 907-ENGL 1qq9 M 3400855 0425540 “59 9 Page 9 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 The requirements on the physical layout of input and output features are kept to a minimum to allow for differentiated types of MSs and to ease the introduction of

36、future developments in the area of MMI. The standardized control procedures describe the sequence of real actions to be taken by the users. However, since the requirements on the physical input features are minimal the control procedures may differ between MSs depending on the solution of the manufa

37、cturers. The “bridge“ between these requirements is however that the same logical actions have to be taken by the user. That is, the user has to provide the same information for the call control and signalling no matter what the method is. This is also valid if an automatic device is used for carryi

38、ng out the same actions. The logical procedures are therefore defined and standardized in this specification. The drawback of this approach is that the users of GSM Mobile Stations may face a lot of different types of physical MMI which they have to learn. However, to deal with this problem the spec

39、ification gives a definition of a basic public MMI. The basic public MMI allows non-experienced, casual users to make and receive a telephony call. This definition is directed to manufacturers of public mobile telephones. Optionally, the user may set the ME to disable some or all of the MMI function

40、s defined in this specification. This setting shall only apply when the same SIM is in use (see GSM 02.17 5 for security policy), otherwise the ME shall enable the standard MMI. 1.2 Structure of the specification The ETS is divided into sections describing respectively the control procedures, the in

41、put features and the output features. The final section defines the basic public MMI. For a lot of items for which no particular MMI specification is necessary there is a reference to the specifications where the basic requirements are to be found (.e. MS features specified in GSM 02.07 3 and langua

42、ge of announcements specified in GSM 02.40 7). 2 Physical user input features 2.1 General This section gives the requirements or guidelines for the MMI of the input related MS features. Basic requirements on these features are given in GSM 02.07 3 and GSM 02.40 7. 2.2 MMI related to MS access No req

43、uirements additional to those in other GSM specifications (Reference GSM 02.17 5, 11.10 ZO). 2.3 MMI related to MS features The three first issues are covered in GSM 02.07 3: * Country / PLMN selection: The method is manufacturer optional. International Access Function (“+“ key): and * Keypad: The p

44、hysical means of entering the characters 0-9, +, and # (.e. the SELECT function) may be keypad, voice input device, DTE or other, but there must be means to enter this information. The relationship on the keypad between the numbers and letters (where used) is important when mnemonic dialling may be

45、used. The following relationship is therefore preferred though optional. 1 6 MNO 2 ABC 7 PQRS 3 DEF 8 TUV 4 GHI 9 WXYZ 5 JKL O See also subclause 5.2.1. STD.ETS1 ETS 300 907-ENGL L999 m 3400855 0425543 995 Page 10 ETS 300 907 (GSM 02.30 version 5.7.1 Release 1996): August 1999 ACCEPT. SEND and END f

46、unctions: The physical means to perform these functions may be keypad, voice input device, DTE or other, but there must be means to perform these functions. ACCEPT and SEND may use the same means. Setting of called Number Fields (Type of Number), use of the “+“ key function: Users may enter a called

47、 number in two formats, called here International or Open. The Type of Number (TON) may be set to other values if required, but the procedure for this is not defined here. “International format“: This is entered by starting with a “+“ followed by country code, even for national calls. This method is

48、 preferred for roaming and international calls, and highly desirable for storage of short codes or for call-forwarding. This sets the TON to “Intemational“ - see GSM 04.08 I171 table 10.50. “Open format“: This is when the “+“ is not entered, and the number is entered in the normal way for that netwo

49、rk. The number may require a prefix or escape code as normal, for example for entering the international access code or national access code (often “O). This sets the TON to “Unknown“ - see GSM 04.08 17 table 10.50. (This is not the “National“ case, which does not permit prefix or escape digits). Care should be taken with this format, since the dialled number will only be correct in a given network, and may be wrong when roaming. Caution must be applied when using stored numbers or call-forwarding. Setting of Called Number Fields (