ETSI EN 303 204-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Network Based Short Range Devices (SRD) Radio equipment to be used in the 870 MHz to 876 MHz f.pdf

《ETSI EN 303 204-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Network Based Short Range Devices (SRD) Radio equipment to be used in the 870 MHz to 876 MHz f.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 303 204-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Network Based Short Range Devices (SRD) Radio equipment to be used in the 870 MHz to 876 MHz f.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 303 204-2 V1.1.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering the essential requi

2、rements of article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, includi

3、ng IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN)

4、 has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to mandates M/284 and M/441 issued from the European Commission under Directive 98/34/EC i.2 as amended by Directive 98/48/EC i.3.

5、 The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.1. See article 5.1 of Directive 1999/5/EC i.1 for information on presumption o

6、f conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC i.1 are summarized in annex A. The present document is part 2 of a multi-part deliverable. Full details o

7、f the entire series can be found in part 1 1. National transposition dates Date of adoption of this EN: 17 October 2014 Date of latest announcement of this EN (doa): 31 January 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 July 2015 Date of withdrawal

8、 of any conflicting National Standard (dow): 31 July 2016 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting R

9、ules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and

10、 telecommunications terminal equipment within the scope of the Radio Equipment Directive i.1. The modular structure is shown in EG 201 399 i.4. ETSI ETSI EN 303 204-2 V1.1.1 (2014-10) 61 Scope The present document applies to the following following radio equipment types: 1) Network Based SRDs which

11、are SRDs intended to operate in association with other SRDs to form network topologies supporting the intended application. 2) Network Relay Points which are specific Network Based SRDs supporting interconnection of a network of SRDs with an external network or service. These radio equipment types a

12、re capable of operating in all or any part of the frequency bands given in table 1. Table 1: Frequency bands designated to Network Based Short Range Devices Network Based SRD frequency bands Transmit 870,00 MHz to 875,6 MHz Receive 870,00 MHz to 875,6 MHz The present document is intended to cover th

13、e provisions of Directive 1999/5/EC i.1 (R Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods“. 2.2 Informative references The following referenced do

14、cuments are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual r

15、ecognition of their conformity (R A guide to the production of Harmonized Standards for application under the R it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in

16、(a) specific referenced document(s); it qualifies each requirement to be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within

17、the schedule. in the case of Conditional requirements, it associates the requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall

18、be demonstrated to be met in accordance with the referenced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized St

19、andard EN 303 204-2 The following requirements and test specifications are relevant to the presumption of conformity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion

20、of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may

21、 be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly. Where no test is sp

22、ecified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 303 204-2 V1.1.1 (2014-10) 16Annex B (informative): Bibliography Commission Decision 2006/771/EC on harmonization of the radio spectrum for use by short-range devices as amended by subsequent Commission Decisio

23、ns. CEPT/ERC/REC 70-03: “Relating to the use of Short Range Devices (SRD)“. ETSI EN 300 220-1 (V2.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 50

24、0 mW; Part 1: Technical characteristics and test methods“. ETSI TR 100 028 (Parts 1 and 2): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. Council Directive 89/336/EEC of 3 May 1989 on the approximation of

25、 the laws of the Member States relating to electromagnetic compatibility (EMC Directive). ETSI EN 301 489: “Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services“. Council Directive 73/23/EEC of 19 February 1973

26、on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). ETSI ETSI EN 303 204-2 V1.1.1 (2014-10) 17History Document history V1.1.0 June 2014 EN Approval Procedure AP 20141017: 2014-06-19 to 2014-10-17 V1.1.1 October 2014 Publication