ETSI EN 302 120-2003 Services and Protocols for Advanced Network (SPAN) Operation of the Bearer Independant Call Control (BICC) Protocol with SIG 4 PNNI1 0 AINI Signalling Specific.pdf

《ETSI EN 302 120-2003 Services and Protocols for Advanced Network (SPAN) Operation of the Bearer Independant Call Control (BICC) Protocol with SIG 4 PNNI1 0 AINI Signalling Specific.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 302 120-2003 Services and Protocols for Advanced Network (SPAN) Operation of the Bearer Independant Call Control (BICC) Protocol with SIG 4 PNNI1 0 AINI Signalling Specific.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EN 302 120 1.1.1 (2003-01) European Sfandard (Telecommunicafions series) Services and Protocols for Advanced Networks (SPAN); Operation of the Bearer Independant Call Control (BICC) protocol with SIG.4/PNNII .O/AINI signalling specification ATM Forum specification AF-CS-VMOA-0146.000 (2000) mod

2、ified 2 ETSI EN 302 120 VI .I .I (2003-01) Reference DENISPAN-I 30309 Keywords ATM, BICC, endorsement ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la S

3、ous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents betwe

4、en such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except

6、 as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM

7、 and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EN 302 120 VI . 1 . 1 (2003-01) Contents Intellectual Property Rights

8、4 Foreword . 4 Endorsement notice 4 History 6 ETSI 4 ETSI EN 302 120 VI .I .I (2003-01) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for E

9、TSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All

10、published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). National transposition dat

11、es Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 27 December 2002 3 1 March 2003 30 September 2003 30 September 2003 Endo

12、rsement notice The elements of ATM-Forum specification “ATM Forum Specification, Operation of the Bearer Independent Call Control (BICC) Protocol with SIG 4.0/PNNI 1 .O/AINI (2000)“, apply, with the following modifications: Clause 1.2 Replace text of the first paragraph of section “1.2. Scope“ by ne

13、w text shown below: The present document specifies the stage three (see ITU-T Recommendation 1.130 15) of the intenvorking between BICC 11 call control signalling entities and SIG 4.0 121, PNNI 1 .O SI and 131 and AIN1 141 bearer control signalling entities, to construct an ATM bearer connection. Cl

14、ause 2 Replace text of the first paragraph of section 2 “References“ by new text shown below: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor editi

15、on number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at InttD:/doctsox.etsi .o-rpR

16、efercncc. ETSI 5 ETSI EN 302 120 VI .I .I (2003-01) Replace the text of references 11 by the text shown below: 11 ITU-T Recommendation Q. 1902: “Bearer Independent Call Control protocol (Capability Set 2)“. Replace the text of reference 6 by the text shown below: 6 ETSI EN 300 485: “Integrated Servi

17、ces Digital Network (ISDN); Definition and usage of cause and location in Digital Subscriber Signalling SystemNo. one (DSS1) and Signalling SystemNo. 7 (SS7) ISDN User Part (ISUP) ITU-T Recommendation Q.850 (1998) with addendum modified“. Remove the text of reference lo which relates to ANSI T1.113.

18、3 (ANSI ISUP). Remove reference 1 11 because it is not referenced. Replace the text of reference 141 by the text shown below: 14 ETSI EN 301 814: ETSI endorsement of ATM Inter-Network Interface (AINI) signalling specification ATM Forum Specification ATM Inter-Network Interface (AINI) F-CS-0125.000 (

19、1999), modified“. Insert the following extra references at the end of the reference list in section 5: 151 ITU-T Recommendation I. 130 (1988): “Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN“. Clause 4.2 Remove the “note“ which relates to ANSI T1.113.3 (ANSI ISUP). ETSI 6 ETSI EN 302 120 VI .I .I (2003-01) History ETSI