ETSI EN 301 721-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Ear.pdf

《ETSI EN 301 721-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Ear.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 721-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Ear.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 721 V2.1.1 (2016-05) Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of a

2、rticle 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 721 V2.1.1 (2016-05) 2 Reference REN/SES-00391 Keywords earth station, LEO, MES, mobile, MSS, regulation, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +3

3、3 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions

4、 and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

5、print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is availabl

6、e at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any

7、means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. E

8、uropean Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Pa

9、rtners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 721 V2.1.1 (2016-05) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative

10、 references 9g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 10g34 Technical requirements specifications . 11g34.1 Environmental profile . 11g34.1.1 General 11g34.1.2 Temperature 11g34.1.3 Voltage 11g34.1.4 Vibration. 12g34.2 Conformance requirements 12g34.2.1 Unwanted

11、emission outside the bands 148 MHz to 150,05 MHz, 235 MHz to 322 MHz, 335,4 MHz to 399,9 MHz and 399,9 MHz to 400,05 MHz . 12g34.2.1.1 Justification . 12g34.2.1.2 Technical requirements . 12g34.2.1.3 Conformance test 13g34.2.1.4 Test Condition . 14g34.2.1.5 Test requirements 14g34.2.2 Unwanted emiss

12、ion within the bands 148 MHz to 150,05 MHz, 235 MHz to 322 MHz, 335,4 MHz to 399,9 MHz and 399,9 MHz to 400,05 MHz . 15g34.2.2.1 Justification . 15g34.2.2.2 Technical requirements . 15g34.2.2.3 Conformance test 15g34.2.2.4 Test condition 16g34.2.2.5 Test requirements 16g34.2.3 EIRP density within th

13、e operational band. 16g34.2.3.1 Justification . 16g34.2.3.2 Technical requirements . 16g34.2.3.3 Conformance test 17g34.2.3.4 Test condition 17g34.2.3.5 Test requirements 17g34.2.4 Unwanted emissions in carrier-off state 17g34.2.4.1 Justification . 17g34.2.4.2 Technical requirements . 18g34.2.4.3 Co

14、nformance test 18g34.2.4.4 Test condition 18g34.2.4.5 Test requirements 18g34.2.5 MES Control and Monitoring Functions (CMF) 18g34.2.5.1 Justification . 18g34.2.5.2 Special Test Equipment (STE) 19g34.2.5.3 Technical requirements . 19g34.2.5.3.1 Self-monitoring functions 19g34.2.5.3.2 Network control

15、 authorization and reception - Network control authorization . 19g34.2.5.3.3 Network control authorization and reception - Network control reception . 20g34.2.5.3.4 Transmit frequency control . 21g34.2.6 Equipment identity 22g34.2.6.1 Justification . 22g3ETSI ETSI EN 301 721 V2.1.1 (2016-05) 4 4.2.6

16、.2 Technical requirements . 22g34.2.6.3 Conformance test 22g34.2.6.4 Test procedure . 22g34.2.6.5 Test requirements 22g34.2.7 Protection of the Radio Astronomy Service (RAS) from emissions produced by the MES in the bands 150,05 MHz to 153 MHz, 322 MHz to 328,6 MHz and 406,1 MHz to 410 MHz . 23g34.2

17、.7.1 Justification . 23g34.2.7.2 Technical requirements . 23g34.2.7.3 Conformance test 23g34.2.7.4 Test procedure . 23g34.2.7.5 Test requirement . 23g34.2.8 Receiver Performance Requirements 23g34.2.8.1 General 23g34.2.8.2 Receiver Adjacent Channel Selectivity . 23g34.2.8.2.1 Justification . 23g34.2

18、.8.2.2 Technical requirements 23g34.2.8.2.3 Conformance test . 23g34.2.8.2.4 Test procedure . 24g34.2.8.3 Receiver Blocking Characteristics 24g34.2.8.3.1 Justification . 24g34.2.8.3.2 Technical requirements 24g34.2.8.3.3 Conformance test . 24g34.2.8.3.4 Test procedure . 24g35 Testing for compliance

19、with technical requirements 24g35.1 Environmental conditions for testing . 24g35.1.1 General 24g35.1.2 Specification of the environmental test conditions . 24g35.1.3 Tests under extreme voltage conditions 25g35.2 Essential radio test suites 25g35.2.1 Presentation of equipment for testing purposes 25

20、g35.2.2 Description of equipment 25g35.2.3 Host-connected equipment . 26g35.2.4 General test requirements . 26g35.2.4.1 MES test modes 26g35.2.4.2 Special Test Equipment (STE) 26g35.2.4.2.1 STE description . 26g35.2.4.2.2 Use of STE for control and monitoring functions tests . 27g35.2.4.2.3 Test mod

21、ulating signal 27g35.2.4.3 Laboratory Test Equipment (LTE) 27g35.2.4.4 Methods of test for MES RF emissions. 28g35.2.4.5 Interpretation of the measurement results . 28g35.2.4.6 Test report . 28g35.2.5 Testing of host-connected equipment and plug-in modules 28g35.2.5.1 Alternative approaches 28g35.2.

22、5.2 Alternative A: combined equipment . 28g35.2.5.3 Alternative B: use of a test jig . 28g35.2.6 Procedures for measurement of radiated emissions 29g35.2.6.1 General 29g35.2.6.2 Test site . 29g35.2.6.3 Test set up for radiated emissions of the MES 29g35.2.6.4 Reference position of the MES . 30g35.2.

23、6.5 Measurement procedure for radiated emissions (average) 30g35.2.6.5.1 Measurement procedure for average radiated emissions of the MES 30g35.2.6.5.2 Measurement procedure for average radiated emissions of the cabinet 32g35.2.7 Procedures for measurement of conducted emissions 32g35.2.7.1 General 3

24、2g35.2.7.2 Test site . 32g35.2.7.3 Test set-up . 33g35.2.7.4 Measurement procedure for conducted emissions (average). 33g35.2.8 Receiver Adjacent Channel Selectivity. 33g35.2.8.1 General 33g3ETSI ETSI EN 301 721 V2.1.1 (2016-05) 5 5.2.8.2 Test set-up . 34g35.2.8.3 Measurement procedure 34g35.2.9 Rec

25、eiver Blocking Characteristics 34g35.2.9.1 General 34g35.2.9.2 Test set-up. 34g35.2.9.3 Measurement procedure 34g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 36g3Annex B (informative): Bibliography . 38g3History 39g3ETSI ETS

26、I EN 301 721 V2.1.1 (2016-05) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR

27、 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inve

28、stigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised Euro

29、pean Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of conforming to the essential requirements of Direc

30、tive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC 7. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the norm

31、ative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of thi

32、s EN: 12 May 2016 Date of latest announcement of this EN (doa): 31 August 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the presen

33、t document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables e

34、xcept when used in direct citation. Introduction ETSI has designed a modular structure for the standards. Each standard is a module in the structure. The modular structure is shown in ETSI EG 201 399 i.1. Figure 1: Void The present document is based on ETSI EN 300 721 6. The requirements of the pres

35、ent document have been selected to ensure an adequate level of compatibility with other radio services. ETSI ETSI EN 301 721 V2.1.1 (2016-05) 7 The present document does not contain any requirement, recommendation, or information about the installation of the MESs. The determination of the parameter

36、s of the user earth stations using a given satellite constellation for the protection of the spectrum allocated to that satellite constellation, is considered to be under the responsibility of the satellite operator or the satellite network operators. ETSI ETSI EN 301 721 V2.1.1 (2016-05) 8 1 Scope

37、The present document applies to Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites and which have the following characteristics: - the MES could be a Based MES (BMES), a Vehicle mounted MES (VMES), or a Portable MES (PMES); - the

38、MESs operate through satellites in Low Earth Orbit (LEO) as part of a network providing Low Bit Rate Data Communications (LBRDC); - these radio equipment types are capable of operating in all or any part of the frequency bands given in table 1. Table 1: Frequency ranges MES Transmit frequencies and

39、Service allocations (MHz) MES Receive frequencies and Service allocations (MHz) 148 to 149,9 MSS 137 to 137,025 MSS 149,9 to 150,05 LMSS 137,025 to 137,175 MSS 235 to 322 MSS 137,175 to 137,825 MSS 335,4 to 399,9 MSS 137,825 to 138 MSS 399,9 to 400,05 LMSS 235 to 322 MSS 335,4 to 399,9 MSS400,15 401

40、 MSSThe present document is intended to cover the provisions of Directive 2014/53/EU 7 (RE Directive) article 3.2 which states that “.radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference“. In add

41、ition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the RE Directive 7 may apply to equipment within the scope of the present document. NOTE 1: A list of such ENs is included on the ETSI web site. NOTE 2:

42、 The MESs are controlled and monitored by a Network Control Facility (NCF). The NCF is outside the scope of the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For spec

43、ific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference

44、. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 Void. 2 IEC Publication 60068-2-1 (2007): “Environmental testing

45、 - Part 2: Tests. Tests A: Cold“. 3 IEC Publication 60068-2-2 (2007): “Environmental testing - Part 2: Tests. Tests B: Dry heat“. 4 IEC Publication 60068-2-64 (2008): “Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance“. 5 Void. ETSI ETSI EN 301 721 V2.1.1 (

46、2016-05) 9 6 ETSI EN 300 721 (V1.2.2) (07-1999): “Satellite Earth Stations and Systems (SES); Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz“. 7 Directive 2014/53/EU of the European Parliament and of the

47、Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or ve

48、rsion number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot

49、 guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI EG 201 399 (V3.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the Radio taken from IEC publications 60068-2-1 2 and 60068-2-2 3. For MESs expected to operate in an environment outside this temperature range the applicant will take the necessa