ETSI EN 301 489-1-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 1 Common te.pdf

《ETSI EN 301 489-1-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 1 Common te.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 489-1-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 1 Common te.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 489-1 V1.9.2 (2011-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements Harmonized European Standard ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 2Reference REN

2、/ERM-EMC-268-1 Keywords EMC, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice

3、Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Do

4、cument Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on th

5、e current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be re

6、produced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the ben

7、efit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 3Contents Intellectual Property Rig

8、hts 6g3Foreword . 6g31 Scope 9g32 References 10g32.1 Normative references . 10g32.2 Informative references 11g33 Definitions and abbreviations . 11g33.1 Definitions 11g33.2 Abbreviations . 14g34 Test conditions . 14g34.1 General . 14g34.2 Arrangements for test signals . 14g34.2.1 Arrangements for te

9、st signals at the input of transmitters . 15g34.2.2 Arrangements for test signals at the output of transmitters . 15g34.2.3 Arrangements for test signals at the input of receivers . 15g34.2.4 Arrangements for test signals at the output of receivers . 15g34.2.5 Arrangements for testing transmitter an

10、d receiver together (as a system) 16g34.3 RF exclusion band of radio communications equipment 16g34.4 Narrow band responses of receivers or receivers which are part of transceivers . 16g34.5 Normal test modulation 17g35 Performance assessment . 17g35.1 General . 17g35.2 Equipment which can provide a

11、 continuous communication link 18g35.3 Equipment which does not provide a continuous communication link 18g35.4 Ancillary equipment . 18g35.5 Equipment classification 18g36 Performance criteria . 19g36.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 19g36.2 Pe

12、rformance criteria for transient phenomena applied to transmitters and receivers . 20g36.3 Performance criteria for equipment which does not provide a continuous communication link 20g36.4 Performance criteria for ancillary equipment tested on a stand alone basis . 20g37 Applicability overview table

13、s . 20g37.1 EMC emission 21g37.2 Immunity 21g38 Methods of measurement and limits for EMC emissions 22g38.1 Test configuration. 22g38.2 Enclosure of ancillary equipment measured on a stand alone basis . 22g38.2.1 Definition 23g38.2.2 Test method 23g38.2.3 Limits 23g38.3 DC power input/output ports 2

14、3g38.3.1 Definition 23g38.3.2 Test method 23g38.3.3 Limits 24g38.4 AC mains power input/output ports . 24g38.4.1 Definition 24g38.4.2 Test method 24g38.4.3 Limits 25g38.5 Harmonic current emissions (AC mains input port) . 25g38.6 Voltage fluctuations and flicker (AC mains input port) . 25g38.7 Telec

15、ommunication ports . 25g3ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 48.7.1 Definition 25g38.7.2 Test method 25g38.7.3 Limits 25g39 Test methods and levels for immunity tests . 26g39.1 Test configuration. 26g39.2 Radio frequency electromagnetic field (80 MHz to 1 000 MHz and 1 400 MHz to 2 700 MHz) 26g3

16、9.2.1 Definition 26g39.2.2 Test method 26g39.2.3 Performance criteria 27g39.3 Electrostatic discharge 27g39.3.1 Definition 27g39.3.2 Test method 27g39.3.3 Performance criteria 27g39.4 Fast transients, common mode . 28g39.4.1 Definition 28g39.4.2 Test method 28g39.4.3 Performance criteria 28g39.5 Rad

17、io frequency, common mode 28g39.5.1 Definition 29g39.5.2 Test method 29g39.5.3 Performance criteria 29g39.6 Transients and surges in the vehicular environment . 29g39.6.1 Definition 29g39.6.2 Test method 29g39.6.2.1 Test requirements for 12V and 24V DC powered equipment . 30g39.6.3 Performance crite

18、ria 30g39.7 Voltage dips and interruptions 30g39.7.1 Definition 30g39.7.2 Test method 30g39.7.3 Performance criteria 30g39.8 Surges . 31g39.8.1 Definition 31g39.8.2 Test method 31g39.8.2.1 Test method for telecommunication ports directly connected to outdoor cables 31g39.8.2.2 Test method for teleco

19、mmunication ports connected to indoor cables . 32g39.8.2.3 Test method for mains ports 32g39.8.3 Performance criteria 32g3Annex A (normative): The HS Requirements and conformance Test specifications Table (HS-RTT) 33g3Annex B (normative): Technical requirements for after market equipment (ESAs), whi

20、ch are not related to immunity related functions of the vehicle, necessary to demonstrate conformance to the motor vehicle EMC Directive 2004/104/EC . 36g3B.1 General . 36g3B.2 Technical requirements for radio equipment 36g3B.2.1 Broadband electromagnetic interference (emissions) generated by the ES

21、A . 36g3B.2.2 Narrow-band electromagnetic interference (emissions) generated by the ESA . 36g3B.2.2.1 Narrow-band spurious emissions of RF transmitters 37g3B.2.2.2 Narrow-band spurious emissions of transceivers in stand by mode and receivers . 37g3B.2.2.3 Narrow-band spurious emissions of ancillary

22、equipment . 37g3B.2.3 Immunity of the ESA to transient disturbances conducted along the supply lines . 37g3B.2.4 Conducted disturbances (emissions) caused by the ESA . 37g3Annex C (normative): Application of harmonized EMC standards to multi-radio, multi-standard-radio, and combined radio, non-radio

23、 equipment . 39g3C.1 Where all products can operate independently of each other . 39g3C.1.1 Emissions . 39g3ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 5C.1.2 Immunity 40g3C.2 Where one or more of the individual products cannot operate independently . 40g3C.2.1 Products physically incorporated within an

24、other product 40g3C.2.2 Products connected to, but not physically incorporated within, another product . 41g3C.3 Where none of the component parts operate independently. 41g3C.3.1 Emissions . 41g3C.3.2 Immunity 41g3C.4 Application of harmonized EMC standards to multi-radio and multi-standard-radio e

25、quipment 42g3C.4.1 Multi-radio equipment capable of independent transmission . 42g3C.4.2 Multi-radio equipment and multi-standard-radio equipment not capable of independent transmission . 42g3C.4.3 Multi-radio equipment comprising of numerous identical radio transmitters 42g3Annex D (informative): T

26、he EN title in the official languages . 43g3Annex E (informative): Bibliography . 44g3History 45g3ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these

27、essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest up

28、dates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serv

29、er) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a ma

30、ndate from the European Commission issued under Council Directive 98/34/EC i.3 (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be p

31、ublished in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility (“the EMC Directive“) (2004/108/EC i.2 as amended) and Directive 1999/5/EC i.1 of the European Parliament and

32、 of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Part 2: “Specific conditions for radio paging equipment“; Part 3: “Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9

33、kHz and 40 GHz“; Part 4: “Specific conditions for fixed radio links, Broadband Data Transmission System Base stations, ancillary equipment and services“; Part 5: “Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)“; Part 6: “Specific conditions fo

34、r Digital Enhanced Cordless Telecommunications (DECT) equipment“; Part 7: “Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)“; Part 8: “Specific conditions for GSM base stations“; Part 9: “Specific conditions

35、for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices“; Part 10: “Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment“; Part 11: “Specific conditions for terrestrial sound broadcasti

36、ng service transmitters“; Part 12: “Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)“; Part 13: “Specific conditions for Citizens Band (CB) radio and ancillary equ

37、ipment (speech and non-speech)“; Part 14: “Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters“; Part 15: “Specific conditions for commercially available amateur radio equipment“; Part 16: “Specific conditions for analogue cellular radio communications equip

38、ment, mobile and portable“; Part 17: “Specific conditions for Broadband Data Transmission Systems“; Part 18: “Specific conditions for Terrestrial Trunked Radio (TETRA) equipment“; Part 19: “Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing dat

39、a communications“; Part 20: “Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)“; ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 8Part 22: “Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment“; Part 23: “Specific conditions for

40、 IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment“; Part 24: “Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment“; Part 25: “Specific conditions for CDMA 1x spread sp

41、ectrum Mobile Stations and ancillary equipment“; Part 26: “Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment“; Part 27: “Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)“; Part 28: “Spe

42、cific conditions for wireless digital video links“; Part 29: “Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands“; Part 31: “Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Imp

43、lants (ULP-AMI) and related peripheral devices (ULP-AMI-P)“; Part 32: “Specific conditions for Ground and Wall Probing Radar applications“; Part 33: “Specific conditions for Ultra Wide Band (UWB) communications devices“; Part 34: “Specific conditions for External Power Supply (EPS) for mobile phones

44、“. National transposition dates Date of adoption of this EN: 15 September 2011 Date of latest announcement of this EN (doa): 31 December 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 June 2012 Date of withdrawal of any conflicting National Standard (d

45、ow): 30 June 2013 ETSI ETSI EN 301 489-1 V1.9.2 (2011-09) 91 Scope The present document contains the common requirements for radio communications equipment and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Product dependent arrangements necessary to perform the E

46、MC tests on dedicated types of radio communications equipment, and the assessment of test results, are detailed in the appropriate product related parts of EN 301 489 series i.13. The present document, together with the product related part, specifies the applicable EMC tests, the methods of measure

47、ment, the limits and the performance criteria for radio equipment and associated ancillary equipment. In case of differences (for instance concerning special conditions, definitions, abbreviations) between part 1 of EN 301 489 series i.13 and the relevant product related part of EN 301 489 series i.

48、13, the product related part takes precedence. Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port of radio equipment and combinations of radio and associated ancillary equipment are not included in the present document. Such technic

49、al specifications are normally found in the relevant product standards for the effective use of the radio spectrum. The environment classification used in the present document refers to the environment classification used in: EN 61000-6-3 i.4 and EN 61000-6-1 i.5 for the residential, commercial and light industrial environment; or TR 101 651 i.6 for the telecommunication centre environment; or ISO 7637-2 8 for the vehicular environment. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus intended to be