ETSI EN 301 260-2004 Private Integrated Services Network (PISN) Specification functional models and information flows Message waiting indication supplementary service (V1 2 1 ISO I_1.pdf

《ETSI EN 301 260-2004 Private Integrated Services Network (PISN) Specification functional models and information flows Message waiting indication supplementary service (V1 2 1 ISO I_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 260-2004 Private Integrated Services Network (PISN) Specification functional models and information flows Message waiting indication supplementary service (V1 2 1 ISO I_1.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 260 V1.2.1 (2004-01)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Specification, functional models and information flows;Message waiting indication supplementary serviceISO/IEC 15505 (2003), modifiedETSI ETSI EN 301 260 V1.2.1 (2004-01) 2 Refer

2、ence REN/ECMA-00168 Keywords endorsement, ISDN, MWI, PISN, QSIG, stage 1, stage 2, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la

3、 Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents betwe

4、en such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced exc

6、ept as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHO

7、NTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 260 V1.2.1 (2004-01) 3 Intellectual Property Rights IPRs essent

8、ial or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentiall

9、y Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by

10、 ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA o

11、n behalf of its members and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital

12、Network (ISDN) concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the Message Waiting Indication supplementary service. The present document endorses an International Standard, ISO/IEC

13、 15505. National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any conflicting National Stand

14、ard (dow): 30 September 2004 Endorsement notice The elements of International Standard ISO/IEC 15505 (2003) apply, with the following modifications. ETSI ETSI EN 301 260 V1.2.1 (2004-01) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in

15、 this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies

16、. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 7 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, funct

17、ional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000), modified“. 8 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. Thro

18、ughout the text of ISO/IEC 15505 Replace references as shown in the table below. Reference in ISO/IEC 15505 Modified reference ISO/IEC 11574 EN 300 171 7 ISO/IEC 11579-1 ETS 300 475-1 8 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 260 V1.2.1 (2004-01) 5 History Document history V1.1.1 October 1998 Publication V1.2.1 August 2003 One-step Approval Procedure OAP 20031219: 2003-08-20 to 2003-12-19 V1.2.1 January 2004 Publication