ETSI EN 301 003-6-2000 Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No Two (DSS2) Protocol Connection Characteristics Peak Cell Rate _1.pdf

《ETSI EN 301 003-6-2000 Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No Two (DSS2) Protocol Connection Characteristics Peak Cell Rate _1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 003-6-2000 Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No Two (DSS2) Protocol Connection Characteristics Peak Cell Rate _1.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo

2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790

3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI EN 301 003-6 1.2.1 (2000-10) European Standard (Telecommunications series) Broadband

4、 Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) pr

5、oforma specification for the network 2 ETSI EN 301 003-6 V1.2.1 (2000-1 O) The pre Reference RENE PAN-05242-6 Keywords ATM, ATS, B-ISDN, broadband, DSS2, ISDN, network, PIXIT, UNI ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret

6、 No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:llwww.etsi.org ent document may be made available in more than one electronic version or in p

7、rint. In e of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users o

8、f the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:llwww.etsi.orcg/lb/status/ If you find errors in the present document, send your comment to: editor et.si.f

9、r Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI EN 301 003-6 V1.2.1 (2000-1 O) Cont

10、ents Intellectual Property Rights 5 Foreword . 5 1 Scope 6 2 References 6 3 Definitions and abbreviations . 7 3.1 Definitions 7 3.1.1 Definitions related to conformance testing . 7 3.1.2 Definitions related to EN 30 1 003- 1 . 7 3.2 Abbreviations . 8 4 Abstract Test Method (ATM) . 8 4.1 Description

11、of ATM used . 8 4.2 Conventions for test components and PCOs 9 5 6 Untestable test purposes . 10 7 PCTR conformance 10 8 PIXIT conforniance 10 Protocol Conformance Test Report (PCTR) proforma 12 A . 1 Identification summary . 12 A.l.l Protocol conformance test report 12 A.1.2 IUT identification . 12

12、 A.1.3 Testing environment . 12 A.1.4 Limits and reservations 13 A.1.5 Comments . 13 A.2 IUT Conformance status 13 A.3 A.4 AS A.6 Test campaign report 15 A.7 Observations . 17 ATS to TP map . 10 9 ATS Conformance 11 Annex A (normative): Static conformance summary . 13 Dynamic conformance summary 14

13、Static conformance review report . 14 Annex B (normative): Partial PIXIT proforma 18 Identification summary . 18 B.3 Test laboratory 18 B.4 Client (of the Test Laboratory) . 19 B.5 SUT 19 B . 6 Protocol information . 20 B.6.1 Protocol identification 20 B.6.2 B.6.3 Test management timers . 20 B.6.4 P

14、arameter Values 21 B . 1 B.2 Abstract test suite summary . 18 Configuration to be tested 20 ETSI 4 ETSI EN 301 003-6 V1.2.1 (2000-1 O) Annex C (normative): Abstract Test Suite (ATS) . 22 C . 1 C.2 The TTCN Graphical form (TTCN.GR) 22 The TTCN Machine Processable form (TTCN.MP) 22 Bibliography . 23 H

15、istory 24 ETSI 5 ETSI EN 301 003-6 V1.2.1 (2000-1 O) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and ca

16、n be found in ETSI SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR Policy, no inv

17、estigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Stand

18、ard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 6 of a multi-part standard covering the Broadband Integrated Services Digital Network (B -1SDN); Digital Subscriber Signalling System No. tw

19、o (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner, as described below: Part 1: Part 2: Part 3: Part 4: “Protocol specification ITU-T Recommendation Q.2963.1 121 (1996), modified“; “Protocol Implementation Conformance Statement (PICS) proforma specific

20、ation“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation

21、extra Information for Testing (PIXIT) proforma specification for the network“. Part 5: Part 6: National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdr

22、awal of any conflicting National Standard (dow): 29 September 2000 3 1 December 2000 30 June 200 1 30 June 200 1 ETSI 6 ETSI EN 301 003-6 V1.2.1 (2000-1 O) 1 Scope The present document specifies the network Abstract Test Suite (ATS) for the TB reference point or coincident SB and TB reference point

23、(as defined in ITU-T Recommendation 1.413 i i) of implementations conforming to the standards for the signalling user-network layer 3 specification for Peak cell rate modification by the connection owner of the Digital Subscriber Signalling System No. two (DSS2) protocol for the pan-European Broadba

24、nd Integrated Services Digital Network (B-ISDN), EN 301 003-1 i. A further part of the present document specifies the Test Suite Structure and Test Purposes (TSS Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection ow

25、ner; Part 1: Protocol specification ITU-T Recommendation Q.2963.1 (1996), modified“. ETSI EN 30 1 003-2 (Vi. i): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the conne

26、ction owner; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification“. Pl 41 ETSI EN 30 1 003-5 (Vi. i): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modif

27、ication by the connection owner; Part 5: Test Suite Structure and Test Purposes (TSS Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic callhearer control; Part 1: Protocol specification ITU-T Recommendation Q.293 1 (1993, modi

28、fied“. ETSI EN 300 443-2: “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic callhearer control; Part 2: Protocol Implementation Conformance Statement (PICS) proforma spe

29、cification“. ISO/IEC 9646- 1 (1994): “Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-2 (1994): “Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Par

30、t 2: Abstract Test Suite specification“. ISO/IEC 9646-3 (1998): “Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. ETSI 7 ETSI EN 301 003-6 V1.2.1 (2000-1 O) Pl ISO/IEC 9646-4 (1994): “Infor

31、mation Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization“. ISO/IEC 9646-5 (1994): “Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and

32、clients for the conformance assessment process“. ITU-T Recommendation 1.413 (1993): “B-ISDN user-network interface“. ITU-T Recommendation Q.2963.1 (1996): “Digital Subscriber Signalling System No. 2 - Connection modification: peak cell rate modification by the connection owner“. IO1 i 11 121 3 3.1 D

33、efinitions and abbreviations Definitions For the purposes of the present document, the following definitions apply, in addition to those given in EN 301 003-1 i andEN 300 443-1 4. 3.1.1 Definitions related to conformance testing abstract test case: refer to ISO/IEC 9646-1 6 Abstract Test Method (ATM

34、): refer to ISO/IEC 9646-1 6 Abstract Test Suite (ATS): refer to ISO/IEC 9646-1 6 Implementation Under Test (IUT): refer to ISO/IEC 9646-1 6 System Under Test (SUT): see ISO/IEC 9646-1 6 Upper Tester (UT): see ISO/IEC 9646-1 6 lower tester: refer to ISO/IEC 9646-1 6 Protocol Implementation Conforman

35、ce Statement (PICS): refer to ISO/IEC 9646- 1 6 PICS proforma: refer to ISO/IEC 9646-1 6 Protocol Implementation extra Information for Testing (PIXIT): refer to ISO/IEC 9646- 1 6 PIXIT proforma: refer to ISO/IEC 9646-1 6 Test Purpose (TP): refer to ISO/IEC 9646-1 6 Point of Control and Observation (

36、PCO): see ISO/IEC 9646-1 6 3.1.2 Definitions related to EN 301 003-1 user: DSS2 protocol entity at the User side of the user-network interface where a TB reference point or coincident SB and TB reference point applies user (SB/TB): DSS2 protocol entity at the User side of the user-network interface

37、where a coincident SB and TB reference point applies user (TB): DSS2 protocol entity at the User side of the user-network interface where a TB reference point applies (user is a private ISDN) ETSI 8 ETSI EN 301 003-6 V1.2.1 (2000-1 O) 3.2 Abbreviations For the purposes of the present document, the f

38、ollowing abbreviations apply: ATM ATS CM DSS2 ExTS IUT LT MOT MTC PCO PDU PICS PIXIT PTC SUT TP TSS TTCN UT VCI VPCI B-ISDN Abstract Test Method Abstract Test Suite Broadband Integrated Services Digital Network Coordination Messages Digital Subscriber Signalling System No. two Executable Test Suite

39、Implementation Under Test Lower Tester Means Of Testing Main Test Component Point of Control and Observation Protocol Data Unit Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testing Parallel Test Components System Under Test Test Purpose Test Suite Struc

40、ture Tree and Tabular Combined Notation Upper Tester Virtual Channel Identifier Virtual Path Connection Identifier 4 4.1 Abstract Test Method (ATM) Description of ATM used The requirement for testing the network IUT is to focus on the behaviour of the network IUT at the user-network interface where

41、a TB reference point or coincident SB and TB reference point applies. Thus the IUT is the network DSS2 protocol entity at a particular user-network interface and is not the whole network. It is possible to specify an ATS based on a Single party (remote) test method for such an IUT. However, it is co

42、nsidered that an ATS based on such an approach is of limited use as the only way to specify IUT generated PDUs is to use the “implicit send“ statement. Many users of such an ATS would replace the “implicit send“ statements with descriptions of the behaviour at other interfaces. An ATS based on a mul

43、ti-party test method is considered to be more useful in that it is closer to how a real test suite would be constructed. Such a test method specifies behaviour at multiple network interfaces. One very important limitation here is that tests are focussed on one particular interface. Thus the test sys

44、tem is made up one Main Test Component (MTC) and one or more Parallel Test Components (PTC), see figure 1. ETSI 9 ETSI EN 301 003-6 V1.2.1 (2000-1 O) 4.2 Conventions for test components and PCOs Master part Slave part I Lo(pco) I L1 (pco) I I I UT NETWORK Figure 1 : Multi-party test method In a mast

45、erklave arrangement, the MTC is considered to be the master while the PTCs are the slaves. The “slave“ testers are only an explicit description of how to deal with the remote interfaces during the testing process, i.e. “how to make the IUT send the required message“. This means, in particular, that

46、the verdict will only be assigned from the protocol aspects observed on the interface under test (Le. by the “master“ tester), as it would be observed by a terminal connected to this interface. A failure in the correlation between the protocol at the different interfaces to which the different teste

47、rs are connected, i.e. in the mechanism of the functional service itself, will not cause a FAIL verdict. For instance, if the IUT fails to send a message on the tested interface after another interface has received the proper stimulus, the verdict will be INCONCLUSIVE. The MTC MTCA has two functions

48、 in this configuration. Firstly, it has the MTC function of controlling the one or more PTCs. Thus it is responsible for starting the PTCs and afterwards coordinates activities by exchanging Coordination Messages (CM) with the PTCs. Secondly it is responsible for the behaviour of the Lower Tester (L

49、T) at PCO LO. A combination of the remote and multi-party test methods is applied. As can be seen from figure 1, several PCOs are used. All PCOs reside at the service access points between layers 2 and 3. MTC SUT PTC1 Layer 3 Layer 2 Layer 1 Figure 2: Combination of the remote and multi-party test methods Layer 3 Layer 2 Layer 1 ETSI 10 ETSI EN 301 003-6 V1.2.1 (2000-1 O) The MTC PCO is named “LO“ (“L“ for Lower). The LO PCO is used to control and observe the behaviour of the IUT and test case verdicts a