ETSI EN 300 417-10-1-2003 Transmission and Multiplexing (TM) Generic requirements of transport functionality of equipment Part 10-1 Synchronous Digital Hierarchy (SDH) radio specif_1.pdf

《ETSI EN 300 417-10-1-2003 Transmission and Multiplexing (TM) Generic requirements of transport functionality of equipment Part 10-1 Synchronous Digital Hierarchy (SDH) radio specif_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 417-10-1-2003 Transmission and Multiplexing (TM) Generic requirements of transport functionality of equipment Part 10-1 Synchronous Digital Hierarchy (SDH) radio specif_1.pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 417-10-1 V1.1.1 (2003-11)European Standard (Telecommunications series) Transmission and Multiplexing (TM);Generic requirements of transport functionality of equipment;Part 10-1: Synchronous Digital Hierarchy (SDH)radio specific functionalitiesETSI ETSI EN 300 417-10-1 V1.1.1 (2003-11) 2

2、 Reference DEN/TM-01015-10-1 Keywords access, FWA, radio, SDH ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Im

3、portant notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is

4、the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. In

5、formation on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. Th

6、e copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks curr

7、ently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 417-10-1 V1.1.1 (2003-11) 3 Contents Intellectual Property Rights5 Foreword.5 1 Scope 7 2 References 7 3 A

8、bbreviations .8 4 Void9 5 Generic Radio process and performance9 5.1 Supervision process9 5.1.1 Atomic function fault management 9 5.1.1.1 Defect filter f1.9 5.1.1.1.1 Modulation Loss of signal .10 5.1.1.1.2 Modulation fail 10 5.1.1.1.3 Transmission fail .10 5.1.1.1.4 Transmission loss of signal10 5

9、.1.1.1.5 Receiver fail 10 5.1.1.1.6 Receiver Signal Loss .10 5.1.1.1.7 Demodulation fail10 5.1.1.1.8 Demodulation Loss of signal.10 5.1.2 Consequent action filter f211 5.1.2.1 Alarm Indication Signal (AIS) 11 5.1.2.2 Trail Signal Fail (TSF)11 5.1.3 Fault cause filter f3 .12 5.1.3.1 Termination sink

10、function .12 5.1.3.2 Termination source function .12 5.1.4 Failure filter f412 5.2 Additional Radio specific performance monitoring .13 5.2.1 Additional Radio specific performance monitoring filter fR10(pRLTS-1) .14 5.2.2 Additional Radio specific performance monitoring filter fR11(pRLTS-2) .14 5.2.

11、3 Additional Radio specific performance monitoring filter fR2n(pTLTS-n)14 5.2.4 Additional Radio specific performance monitoring filter fR20(pTLTS-1)14 5.2.5 Additional Radio specific performance monitoring filter fR21(pTLTS-2)14 5.3 Equipment Management Function (EMF) Radio specific performance mon

12、itoring process .15 5.3.1 Additional Radio specific performance monitoring filter fR51 (history management) 15 6 Generic definition of Radio protection process15 7 STM-1 Radio physical section layer functions 15 7.1 STM-1 Radio physical section connection functions .17 7.2 STM-1 Radio physical secti

13、on trail termination functions.17 7.2.1 STM-1 Radio Physical section trail termination source RPS1_TT_So 17 7.2.2 STM-1 Radio physical section trail termination sink RRS1_TT_Sk18 7.3 STM-1 Radio physical section adaptation functions 20 7.3.1 STM-1 Radio Physical section to regenerator section adapta

14、tion source RPS1/RS1_A_So 20 7.3.2 STM-1 Radio Physical Section to Regenerator Section Adaptation Sink RPS1/RS1_A_Sk21 7.3.3 STM-1 Radio physical section to Radio frame complementary OverHead section adaptation source RPS1/RFCOH_A_So22 7.3.4 STM-1 Radio physical section to radio frame complementary

15、OverHead section adaptation sink RPS1/RFCOH_A_Sk23 8 STM-0 Radio physical section layer functions 24 8.1 STM-0 Radio physical section connection functions .25 8.2 STM-0 Radio physical section trail termination functions.25 8.2.1 STM-0 Radio physical section trail termination source RPS0_TT_So.25 ETS

16、I ETSI EN 300 417-10-1 V1.1.1 (2003-11) 4 8.2.2 STM-0 Radio physical section trail termination sink RRS0_TT_Sk27 8.3 STM-0 Radio physical section adaptation functions 28 8.3.1 STM-0 Radio physical section to Radio regenerator section adaptation source RPS0/RS0_A_So 28 8.3.2 STM-0 Radio physical sect

17、ion to Radio regenerator section adaptation sink RPS0/RS0_A_Sk29 8.3.3 STM-0 Radio physical section to Radio frame complementary OverHead section adaptation source RPS0/RFCOH_A_So30 8.3.4 STM-0 Radio physical section to Radio frame complementary OverHead section adaptation sink RPS0/RFCOH_A_Sk31 9 S

18、TM-4 Radio physical section layer functions 32 10 STM-1 regenerator section layer functions 32 10.1 STM-1 regenerator section trail adaptation functions 33 10.1.1 STM-1 regenerator section to media specific bytes channel adaptation source RS1/MSBC_A_so .33 10.1.2 STM-1 regenerator section to media s

19、pecific bytes channel adaptation sink RS1/MSBC_A_sk .34 11 STM-0 Radio regenerator section layer functions35 11.1 STM-0 Radio regenerator section connection functions 36 11.2 STM-0 Radio regenerator section trail termination functions 37 11.2.1 STM-0 Radio regenerator section trail termination sourc

20、e RRS0_TT_So .37 11.2.2 STM-0 Radio regenerator section trail termination sink RRS0_TT_Sk .38 11.3 STM-0 Radio regenerator section adaptation functions .40 11.3.1 STM-0 Radio regenerator section to Radio multiplex section adaptation source RRS0/RMS0_A_So 40 11.3.2 STM-0 Radio regenerator section to

21、Radio multiplex section adaptation sink RRS1/RMS1_A_Sk41 11.3.3 STM-0 Radio regenerator section to DCC adaptation source RRS0/DCC_A_So 42 11.3.4 STM-0 Radio regenerator section to DCC adaptation sink RRS0/DCC_A_Sk43 11.3.5 STM-0 Radio regenerator section to P0s adaptation source RRS0/P0s_A_So/N.44 1

22、1.3.6 STM-0 Radio regenerator section to P0s adaptation sink RRS0/P0s_A_Sk/N.45 11.3.7 STM-0 Radio regenerator section toV0x adaptation source RRS0/V0x_A_So46 11.3.8 STM-0 Radio regenerator section to V0x adaptation sink RRS0/V0x_A_Sk 47 12 STM-4 (Radio) regenerator section layer functions.47 13 STM

23、-0 Radio multiplex section layer functions 48 13.1 STM-0 Radio multiplex section connection functions .49 13.2 STM-0 Radio multiplex section trail termination functions.49 13.2.1 STM-0 Radio multiplex section trail termination source RMS0_TT_So .49 13.2.2 STM-0 Radio multiplex section trail terminat

24、ion sink RMS0_TT_Sk .50 13.3 STM-0 Radio multiplex section adaptation functions 52 13.3.1 STM-0 Radio multiplex section to DCC adaptation source RMS0/DCC_A_So 52 13.3.2 STM-0 Radio multiplex section to DCC adaptation sink RMS0/DCC_A_Sk53 13.3.3 STM-0 Radio Multiplex Section to P0s Adaptation Source

25、RMS0/P0s_A_So54 13.3.4 STM-0 Radio multiplex section to P0s adaptation sink RMS0/P0s_A_Sk.55 13.3.5 STM-0 Radio multiplex section to SX_A.56 13.3.6 STM-0 Radio multiplex section to S3.56 13.3.7 STM-0 Radio multiplex section to SD56 14 Definition of atomic function for protection process for DRRS 56

26、History 57 ETSI ETSI EN 300 417-10-1 V1.1.1 (2003-11) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and

27、 can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pu

28、rsuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present d

29、ocument. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The present document is one of a family of documents that has been produced in order to provide inter-vendor and inter-operator compatibility of Sync

30、hronous Digital Hierarchy (SDH) equipment. The present document is part 10-1 of a multi-part deliverable covering the generic requirements of transport functionality of equipment, as identified below: Part 1-1: “Generic processes and performance“; Part 1-2: “General information about Implementation

31、Conformance Statement (ICS) proforma“; Part 2-1: “Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions“; Part 2-2: “Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementati

32、on Conformance Statement (ICS) proforma specification“; Part 3-1: “Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions“; Part 3-2: “Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS

33、) proforma specification“; Part 4-1: “Synchronous Digital Hierarchy (SDH) path layer functions“; Part 4-2: “Synchronous Digital Hierarchy (SDH) path layer functions; Implementation Conformance Statement (ICS) proforma specification“; Part 5-1: “Plesiochronous Digital Hierarchy (PDH) path layer funct

34、ions“; Part 5-2: “Plesiochronous Digital Hierarchy (PDH) path layer functions; Implementation Conformance Statement (ICS) proforma specification“; Part 6-1: “Synchronization layer functions“; Part 6-2: “Synchronization layer functions; Implementation Conformance Statement (ICS) proforma specificatio

35、n“; Part 7-1: “Equipment management and auxiliary layer functions“; Part 9: “Synchronous Digital Hierarchy (SDH) concatenated path layer functions“; Part 10-1: “Synchronous Digital Hierarchy (SDH) radio specific functionalities“. ETSI ETSI EN 300 417-10-1 V1.1.1 (2003-11) 6 National transposition da

36、tes Date of adoption of this EN: 21 November 2003 Date of latest announcement of this EN (doa): 29 February 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 August 2004 Date of withdrawal of any conflicting National Standard (dow): 31 August 2004 ETSI ET

37、SI EN 300 417-10-1 V1.1.1 (2003-11) 7 1 Scope The present document describes the SDH radio specific functionalities defined in ETS 300 635 2 and ETS 300 785 3 using the EN 300 417 series 5 methodology. The document contains the specification and the amendments necessary to EN 300 417 series 5 in ord

38、er to take into account radio requirements. Considering that: ITU-R Recommendation F.750 1 defines SDH Radio specific functional blocks for transmission at STM-n and sub-STM-1 (STM-0) data rate. ETSI ETS 300 635 2 based on ITU-R Recommendation F.750 1 defines SDH Radio specific functional blocks for

39、 transmission at STM-n data rate. ETSI ETS 300 785 3 based on previous ITU-R Recommendation F.750 1 defines SDH Radio specific functional blocks for transmission at sub-STM-1 data rate. ETSI EN 300 417 5 defines the generic functional requirements for Synchronous Digital Hierarchy (SDH) equipment. T

40、he present document defines the layer and their atomic function for SDH radio equipment. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and

41、/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi

42、.org/Reference. 1 ITU-R Recommendation F.750: “Architectures and functional aspects of radio-relay systems for synchronous digital hierarchy (SDH)-based network“. 2 ETSI ETS 300 635: “Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH); Radio specific functional blocks for transm

43、ission of M x STM-N“. 3 ETSI ETS 300 785: “Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH); Radio specific functional blocks for transmission of M x sub-STM-1“. 4 ETSI EN 300 166: “Transmission and Multiplexing (TM); Physical and electrical characteristics of hierarchical dig

44、ital interfaces for equipment using the 2 048 kbit/s-based plesiochronous or synchronous digital hierarchies“. 5 ETSI EN 300 417 (all parts): “Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment“. 6 ETSI EN 300 147: “Transmission and Multiplexing (TM); Sy

45、nchronous Digital Hierarchy (SDH); Multiplexing structure“. 7 ETSI EN 301 167: “Transmission and Multiplexing (TM); Management of Synchronous Digital Hierarchy (SDH) transmission equipment; Fault management and performance monitoring; Functional description“. ETSI ETSI EN 300 417-10-1 V1.1.1 (2003-1

46、1) 8 8 ETSI EN 301 129: “Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH); System performance monitoring parameters of SDH DRRS“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: AI Adapted Informa

47、tion AIS Alarm Indication Signal ATPC Automatic Transmitter Power Control BIP Bit Interleaved Parity CI Characteristic InformationCk Clock CP Connection Point DCC Data Communications Channel DEG Degraded DemFail Demodulation Fail DRRS Digital Radio Relay System ETSI European Telecommunications Stand

48、ards Institute F_DS Far-end Defect Second F_EBC Far-end Errored Block Count FS Frame Start signal IF In Frame state ITU-R International Telecommunication Union Radio Sector (former CCIR) LOF Loss Of Frame LOP Loss Of Pointer LOS Loss Of Signal LOS(dem) Demodulation Loss Of Signal LOS(mod) Modulation

49、 Loss Of Signal LOS(rx) Loss Of Signal Received MI Management Information ModFail Modulation Fail MON Monitored MS Multiplex Section MSB Media Specific Byte MSBC Media Specific Byte Channel N_DS Near-end Defect Second N_EBC Near-end Errored Block Count NU National Use OOF Out Of Frame PIM Polarization Indentify Mismatch PLM Payload Mismatch PRS0 STM-0 Radio Physical Section RDI Remote Defect Indication REI Remote Error Indication RF Radio Frequency RFCOH Radio Frame Complementary OverHead RL Received Level RLTS Received Level Th